XG02 Propane adapter

[danf1234]

Has anyone had a success with a Madbull XG02 Propane adapter. I have bought one and it’s basically rubbish and won’t work with my TM mags. Is there anything out there that does?

 

[Danhc92]

Mine has worked fine, is yours a genuine madbull one with the black text on the top of the silver bit or a copy with no black text on it?

 

[danf1234]

Definitely genuine with the black writing on the red base

View attachment 103076

 

[danf1234]

I got it working by stripping it all down and putting lubricant on the centre pin. It was stuck in the up position. It works a treat now.

thing I don’t get is, why does everyone think metal filling nozzles are so bad when every can of green gas has one on?

 

[Duff Beer]

https://ultralightoutdoorgear.co.uk/fill-adaptor/
 

This looks like it should do the trick, and isn’t silly money.  For those that aren’t familiar with Soto as a brand they make really high end camping stoves

 

[danf1234]

I have got the Madbull adapter working now by stripping unit down and greasing the centre pin. It was locked solid 

 

[SSPKali]

https://ultralightoutdoorgear.co.uk/fill-adaptor/
 

This looks like it should do the trick, and isn’t silly money.  For those that aren’t familiar with Soto as a brand they make really high end camping stoves

Click to shrink...

It looks like the thread will be the smaller one for Butane-mix camping stoves, not the larger Propane ones. Will pop out to the shed later and check as I have both types and a Madbull knock-off fill valve

EDIT - yeah they are different- see pic

View attachment 103441

 

[Duff Beer]

It looks like the thread will be the smaller one for Butane-mix camping stoves, not the larger Propane ones. Will pop out to the shed later and check as I have both types and a Madbull knock-off fill valve

EDIT - yeah they are different- see pic

View attachment 103441

Click to shrink...

Fair enough!  It was too good to be true

 

[danf1234]

I have managed to get my Madbull adapter working on MWS mags. There is a serious knack to being able to do though. Mag at a certain angle, adapter at a certain angle, more pressure than originally thought etc. now I can fill the mag easily in one go, but it cost me a half cylinder of propane working it out.

The only other question mark is around the metal nozzles, but seeing as all my gas cans have metal nozzles bar the maintenance gas, I am not too bothered about that.