WE M92 Full Metal issues

[Blueforce]

Hey there, I just bought this gun and I'm having a few issues and I'd like to know your ideas on it.... slide works even on safe. 

safety gets locked between safe and fire (full auto position) and works (semi). slide gets stuck (probably on hammer) but also the nozzle stays fixed on the barrel until I pull further/harder. Is this common for WE?

View attachment 49101

 

[EDcase]

Its working fine.

The 'safety' lever is a decocker so do not try force it on.

- Leave it up in the fire mode.

- Rack the slide (to load a round)

- Push the lever down to decock it. Its now in safe

- Lift it up when you are ready to fire.

The idea behind this is to be ready to fire without having to rack.

Of course its double action so not completely necessary.

When a magazine is loaded with gas DO NOT try to decock by holding the hammer as you pull the trigger!!!

This could fire a round as the internal hammer still hits the gas valve.

You can safely decock by holding the hammer and pull the trigger if you first remove the mag.

 

[Blueforce]

It does not decock (maybe should but doesn't). it has a very safe manual decock, don't worry.  the slide should be immovable while safety is on (on the real gun at least)

 

[EDcase]

Must be a different model to mine tho still WE.

Mine does not hold the slide when safe either.

I was told not to rack the slide when the lever is down in safe.

 

[Blueforce]

thank you for your input ^-^

 

[EDcase]

You're welcome, good luck with it.

 

[Keithlag]

there is nothing wrong with it my Tm one and my KJ works m9 are the same also my grandsons src m92 all do the same the nozzle will stop sticking after you have used it also use silicone oil as i have found that they tend to like lots of lubrication.