WE gbbRifles

[MandalShArK]

https://www.bing.com/videos/search?q=we+m4+bolt+stop+mod&&view=detail&mid=9E730A2970525A49220A9E730A2970525A49220A&&FORM=VRDGAR&ru=%2Fvideos%2Fsearch%3Fq%3Dwe%2Bm4%2Bbolt%2Bstop%2Bmod%26FORM%3DHDRSC3

Thats wicked, a simple fix indeed.

 

[Nick G]

Thats wicked, a simple fix indeed.

To be fair I've not done this with either of mine and havn't had any problems with bolt locking back on empty.

But it's certainly an easy fix if you do.

 

[MandalShArK]

Very useful Indeed.

I'm trying to find parts at the mo,

Standard M4 barrels (14.5) are proving to be hard to find. 

 

[Nick G]

https://www.kyairsoft.com/parts/we-rifles-gbbr/m4-series/m4-4-gbbr.html

KY airsoft have got the extension 

 

[MandalShArK]

Picked up the carbine and box of parts today.

Let the games begin! 

View attachment 101513

 

[MandalShArK]

So I've built an M4 and an XM from parts now, and bought some bits from KY Airsoft..

The issue is nothing shoots.

I've put in a maple leaf yellow and omega nub, nothing.. back to standard hop parts..

Nothing,

Rounds do get picked up and either stay in the hop unit or roll out, I've adjusted the hops, no change. 

Any ideas? 

 

[SBoardley]

So I've built an M4 and an XM from parts now, and bought some bits from KY Airsoft..

The issue is nothing shoots.

I've put in a maple leaf yellow and omega nub, nothing.. back to standard hop parts..

Nothing,

Rounds do get picked up and either stay in the hop unit or roll out, I've adjusted the hops, no change. 

Any ideas? 

Do you have an npas fitted?

Does the bolt cycle?

 

[MandalShArK]

Do you have an npas fitted?

Does the bolt cycle?

Yes to both.

 

[SBoardley]

@MandalShArKit could be you have your npas turned too far down so all the gas is working the bolt and not coming out of the nozzle. 

 

[MandalShArK]

@MandalShArKit could be you have your npas turned too far down so all the gas is working the bolt and not coming out of the nozzle. 

Honestly I'd forgotten I had an Npas fitted.

Good shout I'll test it out tomorrow

 

[MandalShArK]

@MandalShArKit could be you have your npas turned too far down so all the gas is working the bolt and not coming out of the nozzle. 

it worked, 
Id just installed the NPAS a couple of weeks ago and left it as it, Id not tested it etc so didnt know the ins and outs.. The more you know!

 

[SBoardley]

it worked, 
Id just installed the NPAS a couple of weeks ago and left it as it, Id not tested it etc so didnt know the ins and outs.. The more you know!

Happy to have been able to help. 

 

[MandalShArK]

Happy to have been able to help. 

Thank you kindly 

 

[JimFromHorsham]

Courtesy of @alxndrhll, some Pmag conversions are on the bench for the WE rifles , getting the height just right was tricky and required a little flat plate lapping into perfection and the insides need a fair bit of work if you don’t want to modify the WE inner magazine (I didn’t ) but success , modifying and floating the base plate like a diving board means the Ranger plate or base plate is nice and secure and covers all the fill port over as well  

View attachment 103804View attachment 103805View attachment 103806

gonna need some tan ones now though ?

 

[alxndrhll]

Courtesy of @alxndrhll, some Pmag conversions are on the bench for the WE rifles , getting the height just right was tricky and required a little flat plate lapping into perfection and the insides need a fair bit of work if you don’t want to modify the WE inner magazine (I didn’t ) but success , modifying and floating the base plate like a diving board means the Ranger plate or base plate is nice and secure and covers all the fill port over as well  

View attachment 103804View attachment 103805View attachment 103806

gonna need some tan ones now though ?

I feel like that BCM grip needs chopping ?

 

[JimFromHorsham]

I feel like that BCM grip needs chopping ?

mill finish chopping the mags first ?

 

[SBoardley]

Courtesy of @alxndrhll, some Pmag conversions are on the bench for the WE rifles , getting the height just right was tricky and required a little flat plate lapping into perfection and the insides need a fair bit of work if you don’t want to modify the WE inner magazine (I didn’t ) but success , modifying and floating the base plate like a diving board means the Ranger plate or base plate is nice and secure and covers all the fill port over as well  

View attachment 103804View attachment 103805View attachment 103806

gonna need some tan ones now though ?

Done this for my emags, have 5 in total, and 4 emags for my ngrs. Best mod for My l119s ever!

 

[CrackCommandoUnit1972]

Here is my good old WE G39c. Done a few mods on its including and NPAS, steel charging handle, maple leaf bucking and a tight bore barrel. Shoots like a laser but can be difficult to get under 350fps on a warm day. 

View attachment 104503

 

[sjhirst]

I think the g36 will be my next purchase.

I've a p90 on the way, so better ease off the wallet for a while!

 

[THE CHIEF]

I'm trying to remove the flash hider from a VN M16 to replace it with a full birdcage. Before I hit it with a blow torch can anyone confirm that it actually comes off and what thread it has please?