• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

The 'What have you just bought' Thread

RostokMcSpoons said:
Yeah, there's a thread over in Electric Guns where I've been tracking my progress working on it... 



And thanks to the input of @Adolf Hamster, @Asomodai and @ak2m4 I've actually got it up-and-running. 

I've not actually used the new piston and piston head, I got a better air seal with the old piston!
It's now running a teeny-tiny bit too hot at ~355fps so when I take it apart again to do a lube job with some proper grease, I'll maybe swap over (it's definitely better made, so worth using), see how it goes
Click to expand...
Knock one tooth off the sector and you'll be golden.

 
RostokMcSpoons said:
Ah, that's a thing I've not seen suggested before - is that to reduce power slightly, or for something else?
Click to expand...
Yup, reduces power without having to cut springs or shorten the barrel.

Plus helps avoiding PME and a bunch of other benefits like faster cycle time.

Just make sure you have enough air volume before getting excited with a Dremel :D

 
Bought this WE Scar H SSR fitted with Inferno Gen2 premium mainly for the engine . It was painted black at some point by a previous owner ( not the seller ) . I was praying I could get the paint off and it took me two days with Isopropyl , kitchen green scourers and a toothbrush . Here it is as nature and the Belgians intended :-

View attachment 83354

View attachment 83355

 
Skara said:
Yup, reduces power without having to cut springs or shorten the barrel.

Plus helps avoiding PME and a bunch of other benefits like faster cycle time.

Just make sure you have enough air volume before getting excited with a Dremel :D
Click to expand...
Excellent - Let's continue this in my F2000 tinkering thread...

 
Last edited by a moderator:
#blackadder said:
Bought this WE Scar H SSR fitted with Inferno Gen2 premium mainly for the engine . It was painted black at some point by a previous owner ( not the seller ) . I was praying I could get the paint off and it took me two days with Isopropyl , kitchen green scourers and a toothbrush . Here it is as nature and the Belgians intended :-

View attachment 83354

View attachment 83355
Click to expand...
That looks really cool. I've got the files for a set of M-LOK rails for the SSR somewhere if you want a more modern look. 

 
This airsoft lark is worse than having a crack habit isn't it?

My F2000 Battlefield 4 build slowly takes shape... got one of the "Amazon specials" red dot sights as it's the spitting image of the games' Coyote sight

View attachment 118153

View down the sight (difficult to get the focus right, but the reticle is sharp in reality)

View attachment 83399

All in all, it's pretty damned nice for £23, next day (Prime) delivery.  The actual design means it won't survive being bashed on a tree, it's got nothing on my Kobra, but the build quality is decent.
Next step is to try to build / bodge a RIS rail into the handguard so I can put a stubby grip on it... 

 
Last edited by a moderator:
RostokMcSpoons said:
The actual design means it won't survive being bashed on a tree, it's got nothing on my Kobra, but the build quality is decent.
Click to expand...
I bought a slip on sight protector for those last night.  Replaces the standard rubber cover for one with a polycarbonate window.  £8 ish from E-Bay.  

I'll have to wait until it eventually gets here to rate it.  

 
The Tuna build's lookin good @RostokMcSpoons. I like the idea of a simple RDS and bought one from Amazon last summer, sadly my eyes didn't agree (astigmatism) I couldn't get it in focus no matter what I did, so back it went. Fiddlesticks.

It's a pity there don't seem to be any airsoft F2000 scopes around, cos that really would look the dug's baws.

 
Cheers ?. There's not much to see as a 'build' yet, once I get the spray paint on it, and start hacking the front end to get a RIS rail and stubby grip on it, then it will be a build

I've got astigmatism too, but it's working fine for me with my toric contact lenses.  Lucky I guess!

One thing I've noticed with this red dot is it is very small and low profile.  So too low when I'm wearing my OneTigris mouth/ear protection.  So I'm going to buy a riser rail for it.

Well taking of airsoft scopes, I didn't get on that well with my old 4x32 scope on my M906, but I'm very tempted with this at £20...

https://www.actionhobbies.co.uk/products/3-9x40-ir-zoom-scope/

Looks a bit of a bargain, but I'm spending some money on other things first... Expect another post in this thread soon ?

Tactical Pith Helmet said:
I bought a slip on sight protector for those last night.  Replaces the standard rubber cover for one with a polycarbonate window.  £8 ish from E-Bay.  

I'll have to wait until it eventually gets here to rate it.  
Click to expand...


Yes definitely interested in that!  That looks superb for the price, I was willing to risk the sight rather than fit the usual type of lens protector in front of it.

 
Last edited by a moderator:
Looks neat, I'll have to see how well it actually fits etc.

Here's the catalogue pic.  

s-l1600.jpg


 
Poor impulse control resulted in these arriving today...

6x lct mid caps for my hk53

1x golden eagle mc6595m

The golden eagle is actually pretty nice, this is extremely surprising given how cheap it is!

The stock, charging handle and flash hiders are hideous and so replacements have already been ordered.

The magazine isnt great while it holds gas (which is shocking for one of these) it unfortunately wont fire the final bb it sits too high in the magazine to trip the bolt stop but too low to be picked up by the BCG.

View attachment 83475

View attachment 83476

View attachment 83477

View attachment 83478

 
??finally my belated birthday present to myself ??View attachment 83490

(in fairness this isn’t a all day type of gun, you go through bb’s and gas like it’s going out of fashion, 1 or 2 games max imho)

 
You must log in or register to reply here.

Similar threads

pyromancer6
The ASG Armalite M15A4 saga
Replies
3
Views
506
pyromancer6
pyromancer6
Beorn
Beginner sling sorrows...
Replies
15
Views
4K
Rogerborg
Rogerborg
andersson
Old original G&G L85a2 - What can be done to it?
Replies
4
Views
584
Anonymoose
Anonymoose
MrTea
'Mk18' style AEG Build
Replies
1
Views
700
Rogerborg
Rogerborg
RostokMcSpoons
JG SA58/LK58 30000 FAL carbine owner's thread
Replies
4
Views
1K
JinxDuh
J
Back
Top