• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

The 'What have you just bought' Thread

CrackCommandoUnit1972 said:
G+G green rubber for the Aug. Was going to get a prommy purple but thought that I would get this as the one in my M4 is giving me good results.
Click to expand...
Should've gone for the prommy.

At least I've had bad experiences with G&G greens, they don't fit every hop chamber/barrel..

 
MandalShArK said:
The training plates chap.
Click to expand...


I might be biased but I love them, I have three variations of the weights as I use a set for running as well (people run in their spare time?!) for me I like the fact they fill the plate bag properly and also means that the plate carrier doesnt bounce around like I see others do when they start running. It makes you think about anything extra you think you need but don't really and it makes you actually set your plate carrier up properly in the way it sits on your body... nothing worse than a saggy plate carrier.

Another purchase late last night, having it changed up to a 10.5" outer barrel and will be building to replicate a couple of my favorite films (although substituting an aimpoint for the vortex strikefire) I don't know if Marui ever made a fixed upper or even if its possible but I'm fine with a detachable carry handle as it can always morph into something further down the line.

tm-rif-ngrs-m4socom_1.jpg


601px-Car15bd.jpg


601px-BHDCommando-6.jpg


Heat-1.jpg


 
Last edited by a moderator:
clumpyedge said:
I might be biased but I love them, I have three variations of the weights as I use a set for running as well (people run in their spare time?!) for me I like the fact they fill the plate bag properly and also means that the plate carrier doesnt bounce around like I see others do when they start running. It makes you think about anything extra you think you need but don't really and it makes you actually set your plate carrier up properly in the way it sits on your body... nothing worse than a saggy plate carrier.

Another purchase late last night, having it changed up to a 10.5" outer barrel and will be building to replicate a couple of my favorite films (although substituting an aimpoint for the vortex strikefire) I don't know if Marui ever made a fixed upper or even if its possible but I'm fine with a detachable carry handle as it can always morph into something further down the line.







Click to expand...
 Completely agree, I recently borrowed some Sapi plates from a mate for a reenactment event and the DCS I have just sat perfectly and it all balanced out properly.

Ill look into getting some soon methinks.

 
MandalShArK said:
 Completely agree, I recently borrowed some Sapi plates from a mate for a reenactment event and the DCS I have just sat perfectly and it all balanced out properly.

Ill look into getting some soon methinks.
Click to expand...


Make sure you have a real good think about what you have on your kit now and what you can get rid of. Plate weights are combined on the website so when you look at it its not a weight per plate.

 
Skara said:
You're gonna have fun with it :)

at least I have a lot of fun with mine :)
Click to expand...
I did my research until after the trade with a teammate who basically got conned into buying an ex-players lot which turned out to be junk builds), this was in the lot so i nabbed it.

All those cool features though.....can it run 11.1?

 
clumpyedge said:
Make sure you have a real good think about what you have on your kit now and what you can get rid of. Plate weights are combined on the website so when you look at it its not a weight per plate.
Click to expand...
Well.my rig for Reenactment is weighted up with full mags of inert 5.56, excess weight isn't an issue ?

 
RabidNinja64 said:
I did my research until after the trade with a teammate who basically got conned into buying an ex-players lot which turned out to be junk builds), this was in the lot so i nabbed it.

All those cool features though.....can it run 11.1?
Click to expand...
Yes, but be aware that the stock bushings are terrible, you may want to replace them asap just in case.. Mine were completely gone in less than 5000 bbs fired..

By the way, I just picked up a barrel extension, a rmr riser, a couple of sling mounts and a sling plate.

Next week it'll be time for a new outer barrel and a bit of a lathe work on a suppressor..

 
Last edited by a moderator:
clumpyedge said:
Another purchase late last night, having it changed up to a 10.5" outer barrel and will be building to replicate a couple of my favorite films (although substituting an aimpoint for the vortex strikefire) I don't know if Marui ever made a fixed upper or even if its possible but I'm fine with a detachable carry handle as it can always morph into something further down the line.
Click to expand...
You are correct good sir , TM haven’t made a fixed upper for the M4 recoils but it is possible to do , there’s been a couple of documented builds on different forums over the yrs . I actually built one my self a good while ago , basically I cut away the lower side rail on the carrying handle , drilled and tapped a couple of holes in the base corresponding to ris rail gaps thread locked a couple of pieces of threaded rod in to the holes then epoxy putty in the rail gaps pushed the the rods in to the putty , filled all the side gaps in then sanded and painted then in a Blackhawk down themed camo and then age it a bit .?

 
Got an order in with our resident parts guru ak2m4,

Super Lube

SHS nozzle

SHS cylinder head

O-rings

Hopefully will sort the compression problems in the Krytac LMG-E.

 
You must log in or register to reply here.

Similar threads

pyromancer6
The ASG Armalite M15A4 saga
Replies
3
Views
506
pyromancer6
pyromancer6
Beorn
Beginner sling sorrows...
Replies
15
Views
4K
Rogerborg
Rogerborg
andersson
Old original G&G L85a2 - What can be done to it?
Replies
4
Views
583
Anonymoose
Anonymoose
MrTea
'Mk18' style AEG Build
Replies
1
Views
700
Rogerborg
Rogerborg
RostokMcSpoons
JG SA58/LK58 30000 FAL carbine owner's thread
Replies
4
Views
1K
JinxDuh
J
Back
Top