THE TM MWS thread

[lokkers]

If you have a bolt lock problem with green gas and standard bolt, you need to unscrew your buffer tube 1 turn at a time until it reliably locks on empty.

Dynamic Precision or Guns Modify

I’d definitely avoid the Dynamic Precision nozzles. The BB feed ramp broke on mine after half a mag ?

 

[Davegolf]

This is the problem with all aftermarket parts - quality control / part quality consistency.

The main thing is theat the DP and GM nozzles are actually dimensionally correct, you may have got a lemon.

I dont know why TM dont make more spares TBH, massive sales potential there.

 

[C-Diddy]

Agree about TM spares. Always a bun fight to get them when they release a batch. 

I have been looking at the HAO BCG recently, with Unicorn nozzle set. Tempted to try, just to see. Anyone any experiences with either the BCG and/or nozzle?

Generally though, standfast nozzle return springs, TM parts all day.

 

[alxndrhll]

The standard TM couldn't care less about us still stands. Within Japan you can take full advantage of their warranty and spares. Outside of Japan? You're at the mercy of those that buy complete units and break them down for spares... which is my understanding of how spares come to be at places like Impulse. But the cost of them to buy the complete products is much lower than we pay, so it's easier for them to spin a profit doing it. So there is no 'release of a batch', just a buying of stock to turn into spares... I imagine there is a critical mass on the 'let me know when this is in stock' sign up thing they shoot for before doing so.

 

[Hecker]

Hello would just like to say thanks for all your help you have helped me decide on purchasing a mws 

I love the gun and have had no issues with it apart from the receiver being gappy at the back and having casting seams which is a bif of a disappointment 

Ive watched a few of ollies vids and Ive short stroked it using 2 10p coins in the buffer which has removed possibility of denting on the reciver and buffer tube

Im currently using abbey predator and im getting around 335 fps with 0.2 is this gas perfectly safe to use other than the nozzle spring breaking seen people get 313 fps on propane and green gas 

View attachment 107512

 

[Wavey_Gravey]

135fps? That’s a little low is it not?

 

[Hecker]

135fps? That’s a little low is it not?

its confusing because i see people getting 313 fps with gg and propane and other getting 370 fps 

 

[JimFromHorsham]

@Heckeris your chrono set to MPS ?

 

[rj1986]

Ran the AngryGun nozzle again last sunday, zero issues with it now as I replaced the sealing buffer with the stock TM one. The AG sealing buffer is too wide and causes friction which can cause mid-cycle jams.

so box of goodies i ordered from Fire support turn up to try and cure a similar problem. Go to disassemble to bolt and the 2 screws on the top are solid. Like proper solid. So now seeing if the penetrating fluid will help - if not, have to break out the tools and buy some new screws .

When a 5 minute job turns into a 4 day one...

 

[JimFromHorsham]

so box of goodies i ordered from Fire support turn up to try and cure a similar problem. Go to disassemble to bolt and the 2 screws on the top are solid. Like proper solid. So now seeing if the penetrating fluid will help - if not, have to break out the tools and buy some new screws .

When a 5 minute job turns into a 4 day one...

If it’s tiny screws that may strip &  it’s loctite just try holding the tip of a soldering iron in the screw head for a minute , the heat will often soften the loctite without damaging anything else .

 

[rj1986]

If it’s tiny screws that may strip &  it’s loctite just try holding the tip of a soldering iron in the screw head for a minute , the heat will often soften the loctite without damaging anything else .

i'll give it a try, nothing to lose

Edit: An hour in and still no luck. I've basically cut off the bolt carrier key to try and get at the screws better, but still not budging

2nd edit: yeah, nah, its fucked

 

[Hecker]

@Heckeris your chrono set to MPS ?

no fps mate

 

[JimFromHorsham]

no fps mate

then something is way off , I’d be taking a much closer look at your rifle and chrono settings .

 

[Hecker]

then something is way off , I’d be taking a much closer look at your rifle and chrono settings .

idk its very snappy and abbey ultra is supposed to be weaker than gg and propane 

ive done a complete strip down and nothings off, barrels been cleaned ive also replaced all the springs in the nozzle with a dytac set and its about the same maybe 3fps higher 

could be the bbs ive got im going to order up some bls bbs as ive run out of those atm and currently using valkens because thats all i can get atm 

 

[Davegolf]

Hello would just like to say thanks for all your help you have helped me decide on purchasing a mws 

I love the gun and have had no issues with it apart from the receiver being gappy at the back and having casting seams which is a bif of a disappointment 

Ive watched a few of ollies vids and Ive short stroked it using 2 10p coins in the buffer which has removed possibility of denting on the reciver and buffer tube

Im currently using abbey predator and im getting around 135 fps with 0.2 is this gas perfectly safe to use other than the nozzle spring breaking seen people get 113 fps on propane and green gas 

View attachment 107512

The idea of the coins in the buffer is to increase the spring preload, but this does not protect the buffer from shattering, that is why the HSB has a rubber pad in there.

 

[JimFromHorsham]

idk its very snappy and abbey ultra is supposed to be weaker than gg and propane 

ive done a complete strip down and nothings off, barrels been cleaned ive also replaced all the springs in the nozzle with a dytac set and its about the same maybe 3fps higher 

could be the bbs ive got im going to order up some bls bbs as ive run out of those atm and currently using valkens because thats all i can get atm 

It’s 200fps  off where it could be so somethings not quite right is it ? 
 

but if it’s nice and snappy and you are happy then so be it ??

 

[Hecker]

The idea of the coins in the buffer is to increase the spring preload, but this does not protect the buffer from shattering, that is why the HSB has a rubber pad in there.

it isnt to stop the buffer from shattering its so when the buffer bottoms out the rear screw of the gas key cant come in contact with the back of the receiver denting it! also it stops the wider sides of the bcg from making small dents on the front edge of the entrance of the buffer tube

It’s 200fps  off where it could be so somethings not quite right is it ? 
 

but if it’s nice and snappy and you are happy then so be it ??

never herd of a mws doing 530 fps out the box on a gas comparable to gg

 

[JimFromHorsham]

it isnt to stop the buffer from shattering its so when the buffer bottoms out the rear screw of the gas key cant come in contact with the back of the bolt denting it! also it stops the wider sides of the bcg from making small dents on the front edge of the entrance of the buffer tube

never herd of a mws doing 530 fps out the box on a gas comparable to gg

you should probably read back what you’ve written earlier , and that may answer the question of why everyone thinks your gun is running low 

View attachment 107536

 

[Hecker]

fuck sake lol i thought i put 330 ?

thanks i was wondering what people where going on about

 

[Koooo]

Hi everyone, facing a new problem during test fire my mws....The trigger can't always resset during fire (but can alwalys reset using hand), don't know it that because I lost the Trigger Shaft C Ring or other reason....大家好，我的 mws 在试射过程中遇到了一个新问题……跳跳虎在射击过程中不能总是复位，不知道是因为我丢失了扳机轴 C 环或其他原因……

View attachment 107716


48a714e10e0af0c23c110342e8639f81.mp4