THE TM MWS thread

[occidio]

How old/new is your gun?
 

It is about 3 years 

 

[Davegolf]

Are the magazine gas routes in good condition?

 

[C-Diddy]

@Davegolfappreciate the filled weight info. I had an absolute shocker with my MWS at the weekend, barely clearing a full mag despite it being 12-14°C, and the last few shots being limp as a vicar's handshake.

I'll purge and refill using the 1 second on, 9 second rest and see if I hit the magic 470g on all six mags.

As for the GM P-mags, that's another story but same results ?

 

[Davegolf]

No prob.

The GM Pmags will work, you need to compare the upper profile of the mag (where the gas route is), youll see that the plastic top plate is too high, if you sand/machine/file this down to the same height as the TM mag youll find they work much better.

 

[AlgebraMWS]

Hey guys anyone had luck with installing a Tokyo Marui MK18 hanguard (M4/HK416 NEXT GENERATION)  from an AEG to an unmodded original barrel on a TM MWS? I am curious to see if it is possible with modifications. I was stupid enough to think it would fit directly, I've bought the part second hand from online. I suspect the seller sent me a MADBULL barrel nut with an OEM Tokyo Marui MK18 AEG handguard as the parts don't physically fit..  Upon checking the website of MADBULL, its evident that the rail is OEM TM and the barrel nut is a MADBULL. I've looked up the OEM TM MK18 AEG barrel nut and it has two threaded parts, so I suspect this would solve my issues, by using the new barrel nut with the Madbull barrel nut. 

EDIT:// I guess I will have to source TM MK18 GBB parts, since the handguard seems to be the same on AEG and GBB MK18s, with similar connection methods. Anyone has good suggestions for the TM MK18 GBBR barrel nuts? I need two. Any help or website suggestions for aftermarket or OEM TM parts will be helpful! 
 View attachment 106041


So now I am wondering if I could attach a TM MK18 AEG Barrel nut  (AN:  NGM4-502) on the TM MWS UPPER reciever so that I could attach the TM MK18 AEG handguard. 

 View attachment 106040

View attachment 106037

View attachment 106039

 

[Wavey_Gravey]

Not sure about marui handguards but most AEG rails need a spacer.

You will need a spacer with Madbull handguards too, unless you use an aftermarket outer barrel.

Also, im no expert having only looked at a Mk18 rail once previously, but you have that barrel nut the wrong way round in your photo? Smaller end should sit inside the rail.

 

[AlgebraMWS]

The barrel nut came from a madbull handguard, the seller kept the OEM TM barrel nuts, hence why it doesnt fit, lol fml...

I think I figured it out, I will need to buy the TM MK18 GBB barrel nuts and install it on the MWS. 

View attachment 106042

 

[Cipher-032]

The barrel nut came from a madbull handguard, the seller kept the OEM TM barrel nuts, hence why it doesnt fit, lol fml...

I think I figured it out, I will need to buy the TM MK18 GBB barrel nuts and install it on the MWS. 

View attachment 106042

If its a struggle, I do have a complete Madbull Mk18 handguard set up which I ran on my MWS for a little while

All you need is either a barrel adapter or a different outer barrel, like the laylax modular one.

 

[KirbyHCI]

You are possibly the first and only case I’ve ever heard of where mags won’t hold higher pressure gas, sounds like you’ve either got duff mags (doubt) or it’s a fill issue.

As before, what green gas cans have you used? Have you tried purging your mags?

I've used Nuprol, Abbey, and WE regular (2.0/etc.etc. depending on brand), and have genuine TM mags from different vendors that all seem to be constructed and behave the same (inc. the one that came with the MWS). I have tried various things, and do purge the air manually in the way that works for different gun's mags, but it makes no difference to the issue with the MWS mags (unless they obviously have trapped air in and need it, like any other mag sometimes gets. Then it's just, as expected, and continues to have issues with regular GG but is fine with 144a/lower pressure).

The gun & mags are about a year old but never skirmished with yet, only used for plinking for a few hours for a day or two at a time before being cleaned up and put away for a week or two. Mostly just keeping myself and the gun maintained, fresh, and enjoyed. lol.

Thank you all for your attempts to assist btw! I'm stumped so I'm just going to keep running 144a 'cause it works. Obviously I'll keep some regular GG on hand in case it's ever too cold or decides to like it one day but, all my main guns are TM so 144a is recommended anyway, and works on everything reliably lol.

 

 

[Koooo]

Hi everyone, just a get a nice MWS, but sometimes it's bolt lock not work (but it can work well if there is little gas in the mag), anyone any idea?

 

[SSPKali]

Hi everyone, just a get a nice MWS, but sometimes it's bolt lock not work (but it can work well if there is little gas in the mag), anyone any idea?

I would make sure the zet plate that holds the bolt open moves freely and the bolt/buffer spring is lubricated well. Then maybe unscrew the buffer tube by 1 turn and see if that helps?

If the mag is getting low on gas it might not fully retract to allow the lock to work.

 

[Koooo]

Thanks, just try these last night and the bolt stop just cracked LOL

I would make sure the zet plate that holds the bolt open moves freely and the bolt/buffer spring is lubricated well. Then maybe unscrew the buffer tube by 1 turn and see if that helps?

If the mag is getting low on gas it might not fully retract to allow the lock to work.

I just switch my bolt and buffer with my friend's, now I believe there should be some problem with the bolt and buffer too...

 

[Lluis]

Hey guys has anyone got the Toxicant mcx mws kit? What are you thoughts on it. Would love to have an mcx gbbr ?

 

[Wavey_Gravey]

Hey guys has anyone got the Toxicant mcx mws kit? What are you thoughts on it. Would love to have an mcx gbbr ?

Heard it’s got it’s issues, wait for the Airsoft Artisan one to drop see how good that is before picking up the Toxicant one.

 

[Lluis]

Heard it’s got it’s issues, wait for the Airsoft Artisan one to drop see how good that is before picking up the Toxicant one.

Where have you see Airsoft artisan is making one? Thanks

 

[Wavey_Gravey]

I asked them ? They’ve just sent a few kits off for testing, check Instagram.

 

[acrxil]

Has anyone tried or reviewed the Jaeger Precision Titan Nub?

 

[Davegolf]

Has anyone tried or reviewed the Jaeger Precision Titan Nub?

I think someone should do a comprehensive test of;

BavTac MHN

Jaeger Titan

SixG Super

Wheres the popcorn

 

[Khyber]

I think someone should do a comprehensive test of;

BavTac MHN

Jaeger Titan

SixG Super

Wheres the popcorn

I shall not be conducting said test. No need. Got the SixG installed and feel no desire to try anything else. ? works a treat ??

??...

 

[Khyber]

Hey, so 15 months and around 12k shots in for my MWS and its time for my first repairs. Nothing major but noticed the feed lips on one of my mags are cracked. Still firing fine but it's about time I got a few spares for the tool box. I'm reluctant to use after market brands as the damn thing shoots so bloody good, I'd rather keep that marui magic but a 10er for 1 feed lip! Outrageous. Any who the Yorkshireman in me is showing now. Are there any genuinely good alternate feed lips out there. Vids I have seen all seem to give feed issues etc with non genuine. Or shall I just bite the bb and suck it up with the real deal.