Captain Darling
Members
- Jan 5, 2020
- 110
- 59
Guarder Power Up or Nuprol 4.0, maybe Rothenburger MAPP in a pinch if you have an AI adaptor and no sense of smell.
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
THE TM MWS thread
- Thread starter Wo1f
- Start date
Guarder Power Up or Nuprol 4.0, maybe Rothenburger MAPP in a pinch if you have an AI adaptor and no sense of smell.
Recoil_
Members
- Sep 3, 2020
- 57
- 10
Well she's all done!
Upgrades are: ML 60 Degree Autobot 2021 rubber and Laylax strike hop arm, Vortex Crossfire ii 1-4x, SixG HSB, Surefire repro, G&P QD stubby foregrip, Magpul FDE rail covers, Magpul magpulls and the Magpul CTR stock.
That's it, I'm very pleased with how it turned out.
View attachment 74296
Upgrades are: ML 60 Degree Autobot 2021 rubber and Laylax strike hop arm, Vortex Crossfire ii 1-4x, SixG HSB, Surefire repro, G&P QD stubby foregrip, Magpul FDE rail covers, Magpul magpulls and the Magpul CTR stock.
That's it, I'm very pleased with how it turned out.
View attachment 74296
Last edited by a moderator:
Bobzy
Members
- May 26, 2021
- 6
- 0
Thanks for the answer!!! Would I also be able to do the same mod on the CQB-R Block 1, found here: https://www.defconairsoft.co.uk/product/tokyo-marui-cqb-r-block-1-gbb-with-zet-system/
GothicGhost
Members
- Apr 4, 2016
- 611
- 373
Yeah I know it get more scratches over time but I did not want to add more on my new £500 gun lol
After a few months it be more warn in
Wild Weasel
Members
- Sep 24, 2019
- 190
- 56
Hi,
Yeah you need to fit a spacer as the barrel nut won't hold the barrel in if you change it and you can just pull out.
Further reading of faq's
https://docs.google.com/document/d/10RLbvPbq-HXDayhcAIPHgoSTcFIcd3Q5PKZc288_tL0/edit?usp=drivesdk
I have played 3 games with mine and the left side is pretty scratched tbh from slinging it. Don't mind it but yeah keep an eye out it won't stay pretty longYeah I know it get more scratches over time but I did not want to add more on my new £500 gun lol
After a few months it be more warn in
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
The cerakote is supposed to be quite resilient to scratching... has it been rubbing up against metal (metal on metal) against the mags on your plate carrier for example? Magpul slings will not scratch it as the furniture on them is plastic bar the actual clips...
thanks for your nice feedback. i decided to try ag nozzle set gen.2 for now. heard about g&p adj.nozzle unconsistent fps. i will see ?.By buffer setup u mean: buffer tube? or buffer spring guide?
So I did it today, i've come to conclusion -
G&P Adjustable nozzle (NPAS) works with adjustable nozzle stop - nozzle stop holds G&P NPAS nozzle sturdier than TM OG one.
BUT in my case its a no go, on a lowest setting it gives me 410FPS, highest - 460; so i've put the NPAS set back together and its ~393FPS - so its still working correctly after using it for ~ 20-30shots with adjustable nozzle stop.
I wonder what could i do to loose 10FPS?
View attachment 74140
In the photo on the right - lowest setting on adjustable nozzle stop.
TadsJ2
Members
- Mar 21, 2021
- 86
- 21
I wouldnt say its inconsistent. U find a desirable FPS and loctite the NPAS screw, then its nice and sturdy and goes nowhere.
AG V2 is a little more inconsistent than G&P NPAS, the best consistency i've seen is on G&P adjustable nozzle stop.
Not sure what it rubbed against, possibly mags although unlikely. I did run it slung on my back for a bit but yeah not sure. Nothing deep just a lighter colour on the Cerakote
Was finally able to get my Mk18 rail off with the Tacticool22 M&P 15-22 Barrel Nut Wrench. Was way easier than using the G&P URX tool since I was able to get way more torque on it. Now to get a second SixG nub, since my original one went to my Block II upper...
Angrygun 10” mcmr is finally on! I think I prefer this look over the 8” mcmr, although I did really like the feel of the 8” handguard... At least they both use the same barrel nut so I can swap between easily, and I’m using outer barrel extensions to accommodate the extra length which makes it doubly easy.
View attachment 74392
I also tried installing the RiW flat hop chamber.
View attachment 74393
Initial impressions were good, the CNC chamber is well made and the concave buckings have a really good fit against the indentation in the arm. However I was unable to use the buckings they provided with my edgi barrel, it was too thick to fully close the hop chamber. I went back to an Autobot which was also very tight but was able to shut which some fiddling.
In terms of adjustment with the hop wheel, there are definitely fewer clicks available, however I was able to sufficiently hop 0.32s. Visually when looking down the barrel, I don’t see any difference between this hop chamber and the stock one with an omega nub, so I have my doubts about the usefulness of this upgrade.
View attachment 74392
I also tried installing the RiW flat hop chamber.
View attachment 74393
Initial impressions were good, the CNC chamber is well made and the concave buckings have a really good fit against the indentation in the arm. However I was unable to use the buckings they provided with my edgi barrel, it was too thick to fully close the hop chamber. I went back to an Autobot which was also very tight but was able to shut which some fiddling.
In terms of adjustment with the hop wheel, there are definitely fewer clicks available, however I was able to sufficiently hop 0.32s. Visually when looking down the barrel, I don’t see any difference between this hop chamber and the stock one with an omega nub, so I have my doubts about the usefulness of this upgrade.
exactly this! I have taken my MK18 to 1 game and the left side has very light scratches, almost superficial, some of them rubbed off and some remained but they are very faint. It’s from the gun resting and rubbing against my mags, metal on metal as alphabear says. The mags on the other hand have actually lost paint work, so they look worse than the rifle. I bought some Magpuls to prevent this. 3 genuine Magpul and 3 from Amazon almost identical price but the Magpul mag assist are a much tighter fit on the mags and this is what you want.
My TM M45A1 mags gave a pretty deep scratch near my trigger guard when slung it to my side. They have metal bumpers on the bottom, unlike the TM MEU mags which have plastic bumpers. Put some black paint in the scratch to kinda blend it back in. My old WE M4 and WE M14EBR are beat and scratched to hell, but for some reason I get bothered when my MWS gets a scratch
Bobzy
Members
- May 26, 2021
- 6
- 0
I went to HAO Industries and ordered a handguard for the MWS. I ordered the wrong size. I asked for cancelation and refund on Friday but haven't gotten any replies yet. Is this because it is a weekend or because they are not active?
I am panicking a bit.
I am panicking a bit.
Last edited by a moderator:
Bobzy
Members
- May 26, 2021
- 6
- 0
The correct size is less expensive so it makes sense for me to get a full refund and then reorder the right size
Shamal
AF-UK patch owner
- Aug 2, 2020
- 2,830
- 2,878
alxndrhll
Members
- Apr 1, 2020
- 1,006
- 675
Assuming you're in the UK, or a handful of other places which are listed on HAOs website, shipping is currently suspended so I expect they'll get round to a cancellation/refund before it'd be getting sent out.
Similar threads
