• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

THE TM MWS thread

MiniLuxy said:
Yeah, I planning in the future to change a sling to magpul or vtac. It's just temporary because my funds dried out... even over spent a little bit xD and this Viper sling was on discount and looked nice. It's not that bad but it's not excellent either. It should hold for a while
Click to expand...
Sounds like a good idea, and yes, it's easy to clock up the cost! I had the Viper VX and it was fine for a couple of games, then I noticed it wearing in places. No way I wanted to trust a £600 gun to a £12 sling.  I got a the BFG VCAS from UK Tactical and it's absolutely awesome. 

 
Davegolf said:
@Wild Weasel you can run a completely standard MWS with a 6.03 barrel and that will get you around 330 on 0.2s
Click to expand...
This might sound like a silly question but say you use the 134 low powered gas and get around 280fps on stock mws.

Then you change to better barrel that increases the fps to around 330/340 would that be adding extra stress on a stock gun or would be the same stress levels because the gas used is still low powered?

Thank you.

 
GothicGhost said:
This might sound like a silly question but say you use the 134 low powered gas and get around 280fps on stock mws.

Then you change to better barrel that increases the fps to around 330/340 would that be adding extra stress on a stock gun or would be the same stress levels because the gas used is still low powered?

Thank you.
Click to expand...
I don't think there would be extra stress involved as the pressure of the gas would be constant. A longer barrel simply allows a larger volume of gas a longer time to accelerate the BB, before the rocket valve closes and the bolt cycles. Slightly more gas per shot, higher BB speed but no change in the pressure of the system.

 
GothicGhost said:
This might sound like a silly question but say you use the 134 low powered gas and get around 280fps on stock mws.

Then you change to better barrel that increases the fps to around 330/340 would that be adding extra stress on a stock gun or would be the same stress levels because the gas used is still low powered?

Thank you.
Click to expand...


Low powered duster yes sub 300, but a tightbore barrel and high power gas / propane will net much higher power.

Im not talking a longer barrel either, just a 250mm 6.03 for 330.

If you went upto a 370mm 6.03 power will climb a lot more.

 
Just for the multiple people asking about power and stuff. Feel free to play about with the bits that you are.

But I am running completely stock internals besides the SixG number from @Davegolfand the thing is about 310-330fps on .20 temp dependant. 

The sites I play chronological on Joules so not much point in me trying to increase the FPS in anyway.

Really would just say play a few games with it standard and see how you get on.

 
Barrel length/bore size and an NPAS are all you really need to up the power to any level you can use in the UK.

A couple of my MWS also have an angry gun v2 piston head and an after market rocket valve spring, but that was just because the OEM parts had started to wear and it’s much harder to get new OEM parts than the after market ones (and they work fine).

 
Cyberlawyer said:
Barrel length/bore size and an NPAS are all you really need to up the power to any level you can use in the UK.

A couple of my MWS also have an angry gun v2 piston head and an after market rocket valve spring, but that was just because the OEM parts had started to wear and it’s much harder to get new OEM parts than the after market ones (and they work fine).
Click to expand...
I have a Mk2 AG nozzle and it seems much better than the Mk1 (even ignoring the piston cup that expanded then dissolved when in contact with *any* kind of oil!) Plus the new version of the Dynamic Precision nozzle seems better and not as brittle as the old shiny one.

FPS is within +/-7fps between 20 shots so on par with the stock set up. 

Aftermarket valve springs (I think DP in my case) add about 25fps for 0.30g in my experience. Cutting a coil off them brings it back down to close on the TM one. 

I have a couple of TM nozzles and valve springs (have a spare valve from Eagle6 already) on their way from HK as insurance against disasters / parts shortages. ?

 
Last edited by a moderator:
Dude this is not a buy/sell/interest thread... Suggest you post stuff like that in the classifieds section....

 
Got a few bits on order to turn this 10.3" URGI into a 11.5" FBI HRT rifle...

I will more than likely be selling the ODG Cerakote rail, 10.3" Outer barrel and Magpul furniture from this build if anyone would be interested? 

Wouldn't be for a while though! 

View attachment 73104

 
What would be the better option to reloading the magazine in the field out of the TM m4 speed loader TM or this adapter so I can use any speed load it seems TM MWS M4 speed loader adapter

I currently have the  Nuprol NP XL 470 BB Speedloader Nuprol loader  but it don't seem to work well at all, I don't see how the TM version much better as they look the same??

The tube loader you get with the gun  works really good but I can't carry that around with me  it's too big lol.

Thanks for advice let me know what you use thank you.

View attachment 73161

View attachment 73162

 
GothicGhost said:
What would be the better option to reloading the magazine in the field out of the TM m4 speed loader TM or this adapter so I can use any speed load it seems TM MWS M4 speed loader adapter

I currently have the  Nuprol NP XL 470 BB Speedloader Nuprol loader  but it don't seem to work well at all, I don't see how the TM version much better as they look the same??

The tube loader you get with the gun  works really good but I can't carry that around with me  it's too big lol.

Thanks for advice let me know what you use thank you.

View attachment 73161

View attachment 73162
Click to expand...
That adaptor just looks like a HUGE version of the little fold-down one you get on speedloaders.

Nuprol looks just like the TM one? So why didn't you buy a Nuprol M4 instead of the MWS? LOL ?

I have been using the TM one on new and second hand mags for 2+ years with zero issues.

 
I just assumed the Nuprol one would work but thats my bad lol

I will give the TM version a try as it the cheaper option and in the UK :D

 
Last edited by a moderator:
Not to just horribly self promote but; have you considered an Odin sidewinder and adapter? I designed it for myself and was asked to print some for friends then made a whole thing out of it.

Odins are finally back in stock and Airtac UK are printing my adapters as my machines are all poorly. Mag catch, oring so you only lose 1/2 bbs when changing mags. Fills a mag in a couple of seconds. 

View attachment 73171

 
You must log in or register to reply here.

Similar threads

Rechard
Which M4 gas mag is better? VFC or MWS?
Replies
6
Views
1K
ProfHappyCat
ProfHappyCat
Angelvill3
Guns modify mws magazine issue
Replies
2
Views
714
Angelvill3
Angelvill3
Cr0-Magnon
MWS GBBR for Plinking?
Replies
5
Views
632
BigStew
B
aragoth
Custom m733 MWS
Replies
3
Views
358
ButcherBill
ButcherBill
Impulse
G&G m700 knock arm and plunger set issues
Replies
6
Views
1K
Impulse
Impulse
Back
Top