THE TM MWS thread

[Marroksteel]

Would you have any links to these? I assume I can just drop one of these units into the Marui bolt carrier itself or are these complete BCGs?

https://www.fire-support.co.uk/product/dynamic-precision-aluminium-lightweight-bolt-carrier-type-b-black-for-marui-m4a1-mws

https://www.fire-support.co.uk/product/dynamic-precision-reinforced-nozzle-for-marui-m4a1-mws

https://shop.ehobbyasia.com/g-p-mws-forged-aluminum-complete-bolt-carrier-group-set-for-marui-buffer-tube.html

https://shop.ehobbyasia.com/guns-modify-reinforced-drop-in-complete-nozzle-set-v2-for-tokyo-marui-m4-mws-gbbr.html

https://shop.jkarmy.com/hao-bolt-case-bcg-for-marui-mws-ecoline-tm-mws-g-hk-style.html

https://shop.jkarmy.com/guns-modify-zinc-alloy-drop-in-complete-bolt-carrier-set-for-tm-gm-ha-mws.html

http://www.airsoftglobal.com/shop/index.php?main_page=product_info&cPath=570_647&products_id=24718&zenid=es6o8jv45itdgb37p5gn12hr00

http://www.airsoftglobal.com/shop/index.php?main_page=product_info&cPath=570_647&products_id=23379

http://www.airsoftglobal.com/shop/index.php?main_page=product_info&cPath=570_647&products_id=23544

https://shop.ehobbyasia.com/g-p-reinforced-drop-in-complete-nozzle-set-for-marui-mws-gbb-gun-metal-gray.html

https://shop.jkarmy.com/guns-modify-km-g17-stainless-steel-thread-barrel-for-tm-g17-silver-6794.html

https://shop.jkarmy.com/guns-modify-km-g17-stainless-steel-thread-barrel-for-tm-g17-silver-6790.html

 

[AlphaBear]

I’ve been reading up this morning as a matter of fact. Cheapest way is to get the G&P drop in nozzle set which should fit into the stock Marui bolt. But then I’m thinking I may as well get the complete G&P bolt carrier group. It’s all built for you so just simply drop it in. Decisions, decisions....

Also perhaps a G&P 3.5 nozzle valve kit too perhaps ?

 

[Marroksteel]

I’ve been reading up this morning as a matter of fact. Cheapest way is to get the G&P drop in nozzle set which should fit into the stock Marui bolt. But then I’m thinking I may as well get the complete G&P bolt carrier group. It’s all built for you so just simply drop it in. Decisions, decisions....

Also perhaps a G&P 3.5 nozzle valve kit too perhaps ?

Just be aware that they make 2 versions of the BCG 1-for their stock tube and 1-for marui's

I would bet its for civilian sized stocks whereas the Tokyo marui is in between civilian/ military size

View attachment 63238

View attachment 63239

View attachment 63240

 

[Greenworks]

I’ve been reading up this morning as a matter of fact. Cheapest way is to get the G&P drop in nozzle set which should fit into the stock Marui bolt. But then I’m thinking I may as well get the complete G&P bolt carrier group. It’s all built for you so just simply drop it in. Decisions, decisions....

Also perhaps a G&P 3.5 nozzle valve kit too perhaps ?

I’m also curious to see if anyone has experience with this bcg. I’m still in the process of fixing/returning my AG bolt but if I do return it, I’ll probably buy one of the G&P complete bcg sets and do some kind of review. 
 

I intend on putting one of the g&p adjustable valves in my original bolt and use that for outdoors/1.5+ Joules, then use the g&p bcg for cqb/indoors where improved gas efficiency and cyclic rate is more important for me. Only issue for me with the g&p bolt is the damn shipping costs! 

 

[Marroksteel]

Yeah i would buy anything G&P because field limitations are 2.0J in Hongkong so you know it can take the abuse over stock Japan's 0.98J

 

[AlphaBear]

I’m also curious to see if anyone has experience with this bcg. I’m still in the process of fixing/returning my AG bolt but if I do return it, I’ll probably buy one of the G&P complete bcg sets and do some kind of review. 
 

I intend on putting one of the g&p adjustable valves in my original bolt and use that for outdoors/1.5+ Joules, then use the g&p bcg for cqb/indoors where improved gas efficiency and cyclic rate is more important for me. Only issue for me with the g&p bolt is the damn shipping costs! 

Don’t forget the customs charge and of course that parcelforce handling fee of £12 on top.  

I may wait till Black Friday now. May get some more discounts especially if it’s $169 for a complete bolt. 

Just be aware that they make 2 versions of the BCG 1-for their stock tube and 1-for marui's

I would bet its for civilian sized stocks whereas the Tokyo marui is in between civilian/ military size

View attachment 63238

View attachment 63239

View attachment 63240

Thanks for the heads up the different sizes that’s good to know. 

 

[ajumma]

Don’t forget the customs charge and of course that parcelforce handling fee of £12 on top.  

I may wait till Black Friday now. May get some more discounts especially if it’s $169 for a complete bolt. 

Thanks for the heads up the different sizes that’s good to know. 

Lucky for me I live in Sweden so customs charge will be around £12 flat if they declare the value of the package to be what it actually is. Shipping cost is around £20 for JKArmy "standard service" (whatever the hell that is, probably airmail). WGCshop actually sell the BCG for slightly cheaper (£120/$154) on backorder but they're out of stock of the G&P 4.5 valve so JKArmy is probably my best bet.  

 

[AlphaBear]

Lucky for me I live in Sweden so customs charge will be around £12 flat if they declare the value of the package to be what it actually is. Shipping cost is around £20 for JKArmy "standard service" (whatever the hell that is, probably airmail). WGCshop actually sell the BCG for slightly cheaper (£120/$154) on backorder but they're out of stock of the G&P 4.5 valve so JKArmy is probably my best bet.  

Standard service is normal airmail or in this case HK post so can take from 10 days plus. EMS and DHL will be here within 5 days. However due to Covid EMS times were well buggered so many people used the DHL route. You’ll be paying $30usd more the faster shipping. That’s lost beer money ?

I’ve got a stock nozzle nozzle (to replace the one I buggered up) coming In from Taiwan as a matter of fact probably about 10 days or so. I used bang bang airsoft lol. However I’m seriously considering the whole G&P bolt carrier group too. In the U.K. the max limit is 350fps so the 3.5 npas I believe is what’s needed. 

 

[Marroksteel]

Well I'll make it simple for people with the power of mitutoyo. For the green gas mod cut 33mm or more (depending on your preference) above the brass fitting.

View attachment 63247

View attachment 63248

View attachment 63249

 

[AlphaBear]

Chaps, is the bolt carrier group the same dimensions for all the MWS models. I’ve got the CQBR version so wanted to confirm that if something says compatable with MWS M4A1 it means by default CQBR too. 

 

[SSPKali]

Chaps, is the bolt carrier group the same dimensions for all the MWS models. I’ve got the CQBR version so wanted to confirm that if something says compatable with MWS M4A1 it means by default CQBR too. 

Yep, only difference is the length of the outer barrel and the stock.

 

[mr^Mobs]

Anyone used the Angry Gun nozzle in their MWS? If so any reviews on it? In fact has anyone used any other nozzle than the stock Marui?

View attachment 63159

I use this in one of my bolts to run in both mws and MTR. Works really well I find. I tried the normal npas route but then my nozzle packed in, so this was the obvious replacement for me.

 

[AlphaBear]

OK, best BB's to use in these beasts? I understand a GBBR is quite brutal in loading bb's one needs to use the hardest almost most perfect bb's out here. I foolishly used Nuprol RZR 0.28's which I believe shattered and caused my nozzle and rubber to go tit's up.... So without further adieu what is it you chaps recommend? Geoff's super precision I assume are the best to use? Incidentally, I spoke to firesupport and they said use a hard bb and said G&G 0.28's and higher are very good for GBBRs?

 

[RMDavis]

OK, best BB's to use in these beasts? I understand a GBBR is quite brutal in loading bb's one needs to use the hardest almost most perfect bb's out here. I foolishly used Nuprol RZR 0.28's which I believe shattered and caused my nozzle and rubber to go tit's up.... So without further adieu what is it you chaps recommend? Geoff's super precision I assume are the best to use? Incidentally, I spoke to firesupport and they said use a hard bb and said G&G 0.28's and higher are very good for GBBRs?

I personally use Geoff's 0.32g's 

And had no issues whatsoever with white or tracer bb's both regular and bio! ?

 

[EvilMonkee]

Geoffs or G&G

 

[Wild Weasel]

Geoff's is very hard to find at the moment, outdoor and tactical are the best bet I find though they do have limited numbers in 0.30g bio, they have a shipment in the next few weeks apparently.

Does anybody know the difference between the precision and super precision as well as the natural and super naturals please?

 

[Uncle Pauly]

...I’m thinking I may as well get the complete G&P bolt carrier group. It’s all built for you so just simply drop it in.

I have one of these. Works flawlessly as far as I can tell.

I’ve yet to test it fully during a game day, but I’ve fired a few hundred BBs with it and seems to function exactly the same as the stock Marui BCG.

I bought mine from Airsoft Global. Great service and fast shipping. I opted for the silver version, but they also stock regular black and blingy gold.

http://www.airsoftglobal.com/shop/index.php?main_page=product_info&cPath=570_647&products_id=31660

 

[AlphaBear]

I have one of these. Works flawlessly as far as I can tell.

I’ve yet to test it fully during a game day, but I’ve fired a few hundred BBs with it and seems to function exactly the same as the stock Marui BCG.

I bought mine from Airsoft Global. Great service and fast shipping. I opted for the silver version, but they also stock regular black and blingy gold.

http://www.airsoftglobal.com/shop/index.php?main_page=product_info&cPath=570_647&products_id=31660

Now I'm thinking blingy gold but that would be too 'gangsta' right? Silver would be a nice colour option for the bolt...  better than having a black bolt with it's paint getting all scratched off like what happens with the Marui one.....

 

[JamesWills]

Taking my MWS for its first outdoor skirmish this weekend, will it run okay on green gas in 10 degree weather?

 

[AlphaBear]

It should run fine on Abbey Ultra Predator gas (the red bottle)... the green bottle may just have a tad less power... Just keep the mags warmish

Report back after the weekend with your findings