• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

THE TM MWS thread

I also played today, 13C outside no wind. I was using Puff Dino 14kg green gas with no silicone oil and filling mag for about 9 seconds. I noticed power dropping on some of my mags but few were just awesome - I tried full auto and it worked. Not sure why some mags were troublesome though.

 
Quick question: anyone know whether the Magpul trigger guards are compatible with the MWS? ?

E.g. the Magpul enhanced (aluminium) or plastic MOE trigger guards.
 

Thanks.

 
Davegolf said:
I have fitted a Polymer MOE one, it did need a little tuning, but fits.
Click to expand...


Thanks Dave! Sorry to be an incessant sod, but can you clarify what you mean by "tuning"? E.g. did you have to widen the pin punch holes on the MWS to fit the Magpul pin and screw, something like that?

 
So I took the angry gun nozzle apart gave it a clean as it’s wasn’t moving efficiently in bolt.  I lubed the rubber buffer with some silicon oil which KoA use for their pistons in their recoil gearboxes. Bloody hell what a difference that made. The nozzle moves effortlessly and you can even hear the air moving in the nozzle (well the suction type noise). The stock marui nozzle didn’t have the same affect. The stock marui nozzle just falls straight into the bolt whereas the Angry Gun has that suction resistance. Either the AA rubber buffer is a tad too big or the Marui one is a tad too worn. Dunno. Someone explain to me which is correct please?

On to chrono time. Fully gassed up mag on Abbey Predator gas at room temperature of 20c. Using some 0.2s first shot 371, then consistently 366 for the next few slowly going down to 358 on average. The AA valve will need more adjusting to decrease the gas flow. 
 

Other than that she’s back to normal! Whoop! Happy days. 
 

Oh, the marui hop has 15 click positions. I know coz I counted each click lol. Twice. Using a stock marui rubber and a brass nub the 0.3s which I subsequently used needed 7 clicks of hop for a stable flight. Don’t know if that info is useful for anyone?

 
AlphaBear said:
So I took the angry gun nozzle apart gave it a clean as it’s wasn’t moving efficiently in bolt.  I lubed the rubber buffer with some silicon oil which KoA use for their pistons in their recoil gearboxes. Bloody hell what a difference that made. The nozzle moves effortlessly and you can even hear the air moving in the nozzle (well the suction type noise). The stock marui nozzle didn’t have the same affect. The stock marui nozzle just falls straight into the bolt whereas the Angry Gun has that suction resistance. Either the AA rubber buffer is a tad too big or the Marui one is a tad too worn. Dunno. Someone explain to me which is correct please?

On to chrono time. Fully gassed up mag on Abbey Predator gas at room temperature of 20c. Using some 0.2s first shot 371, then consistently 366 for the next few slowly going down to 358 on average. The AA valve will need more adjusting to decrease the gas flow. 
 

Other than that she’s back to normal! Whoop! Happy days. 
 

Oh, the marui hop has 15 click positions. I know coz I counted each click lol. Twice. Using a stock marui rubber and a brass nub the 0.3s which I subsequently used needed 7 clicks of hop for a stable flight. Don’t know if that info is useful for anyone?
Click to expand...


Can't comment on the AA nozzle, but my TM one has a very good seal with plenty of resistance before it follows the BCG.

Read recommendations from people to thread lock the adjusting screw on the AA nozzle as it has a habit of firing it down the barrel! ?

 
RMDavis said:
Can't comment on the AA nozzle, but my TM one has a very good seal with plenty of resistance before it follows the BCG.

Read recommendations from people to thread lock the adjusting screw on the AA nozzle as it has a habit of firing it down the barrel! ?
Click to expand...
Funny you should mention thredlock,.. Fortunately the  nozzle I have has blue thread lock on it as standard... I've got it shooting at about 340 fps on Abbey gas at temperature 20c when tested this evening....

Anyway, my replacement Marui nozzle should be here in a couple of weeks along with other gubbins...

 
10 hours ago, jsmithski said:

Holy cow, have you seen that?

Click to expand...
Yeah this was shown earlier in the group... (scroll back a few hundred pages lol)... but seriously the concept is great but I hazard to guess you will need a custom G&P upper receiver as the title to this video suggests... Personally give me a HAO upper receiver and forgo this easy method of taking the HOP out..

 
jsmithski said:
Inspiration for you 

View attachment 63684
Click to expand...


Oh hello......... <porn> Those are magpul sites,,,, I do like that... as a matter of fact I have Magpul PTS Masada lost in the loft somewhere I can nab the sites of that but they are black.. However me being me, I'll probably get a black magpul grip, I'm just too conservative when it comes to mixing colours on my rifle lol...

Eenthuncob said:
that does look nice with the MK18 rail on, I'm tempted to get a MK18 rail.
Click to expand...
Do it... you know you want too ?. It just makes the rifle look sexy! Although an all black rail would look nice too. I have a 9 inch DD lite rail which I could plonk on to see what it looks like too. 

 
AlphaBear said:
Oh hello......... <porn> Those are magpul sites,,,, I do like that... as a matter of fact I have Magpul PTS Masada lost in the loft somewhere I can nab the sites of that but they are black.. However me being me, I'll probably get a black magpul grip, I'm just too conservative when it comes to mixing colours on my rifle lol...

Do it... you know you want too ?. It just makes the rifle look sexy! Although an all black rail would look nice too. I have a 9 inch DD lite rail which I could plonk on to see what it looks like too. 
Click to expand...


Thats a lovely looking gun there, I'm right in thinking ill need an adapter ring to get the mk18 rail to fit?

 
I had a replica UBR a few years ago on my Krytac and yes they are heavy and hard to find unless you don't mind paying £200plus for a real one.

 
Eenthuncob said:
Thats a lovely looking gun there, I'm right in thinking ill need an adapter ring to get the mk18 rail to fit?
Click to expand...


Yes you will need a PTS adapter ring from Fire Support about a tenner.  The ring goes on the Marui barrel and the MK18 nut screws onto it.... simples

 
You must log in or register to reply here.

Similar threads

Rechard
Which M4 gas mag is better? VFC or MWS?
Replies
6
Views
1K
ProfHappyCat
ProfHappyCat
Angelvill3
Guns modify mws magazine issue
Replies
2
Views
715
Angelvill3
Angelvill3
Cr0-Magnon
MWS GBBR for Plinking?
Replies
5
Views
634
BigStew
B
aragoth
Custom m733 MWS
Replies
3
Views
361
ButcherBill
ButcherBill
Impulse
G&G m700 knock arm and plunger set issues
Replies
6
Views
1K
Impulse
Impulse
Back
Top