• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

THE TM MWS thread

You are correct, black is for 0c gaming, if you need more FPS change out the floating valve and/or increase barrel length :)

 
You are correct, black is for 0c gaming, if you need more FPS change out the floating valve and/or increase barrel length :)
i've cut my barrel down to about 7" but didn't lose much or even any fps, any way you can explain this? 

 
Hello. Tell me please, maybe someone shot 0.49 balls from Novrich? I made only 5 shots from my MWS with these balls, and was able to hit a growth target at a distance of 80 meters. But a couple of balls flew farther than me the trajectory. Here are the characteristics of my MWS:
Dynamic Precision Enhanced Sealing Buffer

Maple Leaf AEG Hop Tensioner,

Air Seal Hop Up Rubber Chamber - Use Hip Hop

Dynamic Precision Enhanced Nozzle Spring Set,

G & P Aluminum Buffer - had to replace the standard buffer, as it just fell apart.

Prometheus EG Barrel 6.03mm L: 370mm

 
wow, two buffers in the last few posts. when did you guys buy your mws? could it be some quality issues? 

 
Hello. Tell me please, maybe someone shot 0.49 balls from Novrich? I made only 5 shots from my MWS with these balls, and was able to hit a growth target at a distance of 80 meters. But a couple of balls flew farther than me the trajectory. Here are the characteristics of my MWS:
Dynamic Precision Enhanced Sealing Buffer

Maple Leaf AEG Hop Tensioner,

Air Seal Hop Up Rubber Chamber - Use Hip Hop

Dynamic Precision Enhanced Nozzle Spring Set,

G & P Aluminum Buffer - had to replace the standard buffer, as it just fell apart.

Prometheus EG Barrel 6.03mm L: 370mm
What buffer are using the A2 buffer? 

Cheers 

 
вау, два буфера в последних постах. когда вы, ребята, купили свои MWS? это могут быть проблемы с качеством? 
Exactly a year ago. And he fell apart in my winter, when I played in a closed area, at a temperature of +10 degrees. I did not understand the reason. Just after several shots the bolt stopped cocking.

What buffer are using the A2 buffer? 

Cheers 
No, not him. He is too big. He only fits in the stock pipe, but does not produce a platoon. G & P Aluminum Buffer for Tokyo Marui M4A1 MWS GBBR only this one.

 
Last edited by a moderator:
Exactly a year ago. And he fell apart in my winter, when I played in a closed area, at a temperature of +10 degrees. I did not understand the reason. Just after several shots the bolt stopped cocking.

She, not him. He is too big. He only fits in the stock pipe, but does not produce a platoon. G & P Aluminum Buffer for Tokyo Marui M4A1 MWS GBBR only this one.
Cheers dude that's some knarly translation but I think I understand you!! ???

 
so I eventually joined the MWS club and to make it have a variable FPS because of the crazy UK weather I fitted an NPAS



I was worried that the little adjustment tool would disappear into my bag never to be found again so I found a good solution.



Basically I dremeled a channel into the stock plate the same shape as the little tool. Now it won't get lost and always be handy.

 
Last edited by a moderator:
so I eventually joined the MWS club and to make it have a variable FPS because of the crazy UK weather I fitted an NPAS



I was worried that the little adjustment tool would disappear into my bag never to be found again so I found a good solution.



Basically I dremeled a channel into the stock plate the same shape as the little tool. Now it won't get lost and always be handy.
Where did you get your npas if you don't mind me asking?

Cheers.

 
Hey mates , thinking to buy the angry gun bc style mcmr rail, any thoughts specially on the fitment 

cheers

 
Last edited by a moderator:
Do the settings with this NPAS merely reduce the FPS by differing degrees or does one or more of the settings offer a boost to the FPS from stock?
It acts as the rocket valve and by adjusting it you change its length. In its “shortest” setting, it absolutely increased FPS for me and it’s adjusted by an Allen key type tool (though its not actually an Allen key) so in theory you have a high level of granularity in your adjustment. 

 
So I'm thinking of getting a 6.01 370mm barrel for my cqbr as im running a suppressor now, what you guys running?

Cheers 

 
So I'm thinking of getting a 6.01 370mm barrel for my cqbr as im running a suppressor now, what you guys running?

Cheers 
im using the prometheus 370mm inner barrel. It sit flush with the mws original outer barrel. Im running a LVOA rail. You might need a npas if you dont have one already as using the 370 inner barrel does increase my fps for quite a bit... :P

 
im using the prometheus 370mm inner barrel. It sit flush with the mws original outer barrel. Im running a LVOA rail. You might need a npas if you dont have one already as using the 370 inner barrel does increase my fps for quite a bit... :P
Sweet dude, did you see an improvement on performance? 

 
Sweet dude, did you see an improvement on performance? 
tbh im not sure. I didnt use the m4 before the upgrade lol. But personally I think in CQB situation the gun is too long.....

The fps is definitely higher. Grouping and accuracy wise.... maybe slight improvement? bear in mind the stock m4 is already great out of the box :P

 
tbh im not sure. I didnt use the m4 before the upgrade lol. But personally I think in CQB situation the gun is too long.....

The fps is definitely higher. Grouping and accuracy wise.... maybe slight improvement? bear in mind the stock m4 is already great out of the box :P
Well I'll leave it for now just worth thinking about for the future.

Cheers.

 
Back
Top