• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

THE TM MWS thread

rocketdogbert said:
Currently supposed to be building two, personal circumstances have put that on hold for a week or so, but always up for it eventually
Click to expand...
I'm in no rush mate. If you post on here when your back to fabricating I'll take you up on one! ?

Get yourself/life right before helping others! ?

 
Anyone ever used a pdi w hold in their rifle?? Going to fit the super nub and modify tan this week but I love w holds and wouldn't mind using one.

 
Whisky1 said:
Anyone ever used a pdi w hold in their rifle?? Going to fit the super nub and modify tan this week but I love w holds and wouldn't mind using one.
Click to expand...
I had in my DMR way back. I liked the bucking. Took some fiddling to make sure it was centred and it didn’t like SUPER heavy BB’s. It did shoot straight and far though 

 
Ok, so initial testing with silent fill valves is very good, no leaking during filling at all, no propane being wasted and my magazines gas capacity is now very large once again.

This is initial testing though, would have to test it on a skirmish day, where the fill valves failed me.

 
UKCYukarin said:
Ok, so initial testing with silent fill valves is very good, no leaking during filling at all, no propane being wasted and my magazines gas capacity is now very large once again.

This is initial testing though, would have to test it on a skirmish day, where the fill valves failed me.
Click to expand...


See I found that I got inconsistent fills when I used o-rings in the mags... I could get larger fills, and didn't waste gas... but inconsistent none the less. I found that the temperature of the mag played a great part in this and if the mag was warm, I'd struggle to get much in and if it was cold, it could fill it up a lot. 

 
UKCYukarin said:
Ok, so initial testing with silent fill valves is very good, no leaking during filling at all, no propane being wasted and my magazines gas capacity is now very large once again.

This is initial testing though, would have to test it on a skirmish day, where the fill valves failed me.
Click to expand...


Interesting. Thanks for keeping us updated.

 
How much time do you guys put into planning your builds. Are they organic development as you get parts. Or do you know exactly what you want to achieve from the outset?

I like to put together an imagine on Photoshop and get a feel for what she's going to look like. After reading all this forum I've decided I want my mws for 3 gun comps and I wanted another gbbr to dmr. Just ordered an MTR to turn into a dmr and here's my vision for what I want to achieve. Comments/thoughs welcome...

View attachment 47980

 
That looks smart for sure, I think I'd get annoyed with things hooking up on that stock in the field tho.

And completely null for us softers but you'll need a much longer gas tube / gas block way down the barrel ;)

 
Hi guys I need a bit of advice and recommendation. I'm currently using 370mm inner barrel and want to run a silencer set up. Which rail and silencer and outer barrel do you guys recommend?

 
bapexxx said:
Hi guys I need a bit of advice and recommendation. I'm currently using 370mm inner barrel and want to run a silencer set up. Which rail and silencer and outer barrel do you guys recommend?
Click to expand...
Totally depends on the gun you are building. Why not just run a Suppressor on the end of your current set up, and see how it feels to use?

If its too long, shorted the rail  and outer barrel, and allow the inner barrel to run into the suppressor

 
Cipher-032 said:
Totally depends on the gun you are building. Why not just run a Suppressor on the end of your current set up, and see how it feels to use?

If its too long, shorted the rail  and outer barrel, and allow the inner barrel to run into the suppressor
Click to expand...
I can't. Im running the LVOA rail. I want some inspirations haha. like which rail will look good with suppressor etc.

 
[SIZE=17pt]Hi guys![/SIZE]

[SIZE=17pt]Tell me, was anyone have experience installing real combat buffer tube Mil-Spec on TM MWS?[/SIZE]

[SIZE=17pt]The fact that I want to put a real pipe from Geissele, but I do not know whether it will fit or not and do not want to risk.[/SIZE]

[SIZE=17pt]Tube:[/SIZE]

[SIZE=17pt]https://geissele.com/premium-mil-spec-buffer-tube.html[/SIZE]

 
Last edited by a moderator:
Snow Leopard said:
[SIZE=17pt]Hi guys![/SIZE]

[SIZE=17pt]Tell me, was anyone have experience installing real combat buffer tube Mil-Spec on TM MWS?[/SIZE]

[SIZE=17pt]The fact that I want to put a real pipe from Geissele, but I do not know whether it will fit or not and do not want to risk.[/SIZE]

[SIZE=17pt]Tube:[/SIZE]

[SIZE=17pt]https://geissele.com/premium-mil-spec-buffer-tube.html[/SIZE]
Click to expand...
"NOTICE: We do not sell or ship our products outside of the Continental United States. Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S. Department of State, Office of Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR). We are unable to ship these items to foreign addresses, including APO/FPO addresses for deployed service members."

Sorry to burst your bubble... unless you are in the USA, or have a friend in the USA.

 
Cipher-032 said:
"NOTICE: We do not sell or ship our products outside of the Continental United States. Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S. Department of State, Office of Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR). We are unable to ship these items to foreign addresses, including APO/FPO addresses for deployed service members."

Sorry to burst your bubble... unless you are in the USA, or have a friend in the USA.
Click to expand...
Brownell sells geissele aswel. You have some exporters like rainiers arms who might export it aswel 

 
You must log in or register to reply here.

Similar threads

Rechard
Which M4 gas mag is better? VFC or MWS?
Replies
6
Views
1K
ProfHappyCat
ProfHappyCat
Angelvill3
Guns modify mws magazine issue
Replies
2
Views
716
Angelvill3
Angelvill3
Cr0-Magnon
MWS GBBR for Plinking?
Replies
5
Views
634
BigStew
B
aragoth
Custom m733 MWS
Replies
3
Views
362
ButcherBill
ButcherBill
Impulse
G&G m700 knock arm and plunger set issues
Replies
6
Views
1K
Impulse
Impulse
Back
Top