https://www.brownells.co.uk/AR-15-MOD-3-GUNFIGHTER-GRIP-MOD-3-Gunfighter-Grip-Polymer-Black-BRAVO-COMPANY-100013641
Iam not from UK , maybe you can order it from here
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
THE TM MWS thread
- Thread starter Wo1f
- Start date
Iam not from UK , maybe you can order it from here
I messaged them and they have to order one in from the usa, I'll have to look around eu stores
Thanks tho mate ?
Yeah that's what ik like too.. although when it comes to that I'll be leaving the sport I like the mws too much for selling ?
I ordered the grip a couple of years ago when I was just starting airsoft and purchased the wrong one not knowing... RS on an aeg dont work....
But for the mws I just undid the bolt grip off put the new one on and bolted it up... it was just a tighter fit over the stock grip and yes also agree to the thin side but I always wear gloves.. bb to the fingers and hands in cqb building clearance isn't so nice
think I'll wait it out until I get some proper wear on her the I'll give her a tidy up spray ?? cheers guys
I ordered the grip a couple of years ago when I was just starting airsoft and purchased the wrong one not knowing... RS on an aeg dont work....
But for the mws I just undid the bolt grip off put the new one on and bolted it up... it was just a tighter fit over the stock grip and yes also agree to the thin side but I always wear gloves.. bb to the fingers and hands in cqb building clearance isn't so nice
think I'll wait it out until I get some proper wear on her the I'll give her a tidy up spray ?? cheers guys
Shizbazki
Supporters
- Oct 4, 2014
- 785
- 144
I'm like you i would not paint any of my guns from anything other than stock. Most guns i've see people DIY paint look bad (in my opinion) some people don't even strip the gun for painting.
The only gun i ever owned that i painted was a KWA Kriss Vector that i got second hand, previous seller failed to mention that it was a two tone that he had spray painted black, and poorly at that. I stripped it down to bare parts, carefully prepped and primed the parts that needed painting. Two coats of primer, followed by 4 light coats of paint sanded in between and then two further coats of lacquer later, each coat had 24 hours drying period in between. I had a two tone sparkling black and bronze Vector. Sold it a year later, ive been keeping my eye out for it to see if it ever crops up on the market again.
But in general i never paint my guns and do my best to keep them looking stock colour.
As for RS on my MWS i have a real steel Magpul MOE-SL Stock and MOE grip, Magpul sling point and sling.
Dont think any rs charging handle will work with the m4. Afaik pts and angry gun is a airsoft company. I'm using the pts raptor charging handle on mine.
PopRocket123
Members
- Dec 12, 2016
- 1,518
- 777
I wouldn't paint it. The style of it suits the clean look much better. Nothing wrong with adding some more tan though like with grips, rail covers or even the scope mountneed some help guys,
the question is...
to paint or not to paint?
and if I should paint, In what style?
thanks in advance
View attachment 47676
DopeYourScope
Members
- May 29, 2018
- 263
- 88
Has anyone had any luck with a red dot sight sub £100, something that will keep it's zeroing. Want to see if there's any alternatives before I purchase a Vortex (I've already got a 3-9x50 for my M40) I know they're spot on just don't have the upfront for one at the moment... Also PEQ recommendations? been looking at DBALs and the like just wanted some opinions... looking for something where the laser will hold it's zero.
Just found this thread whilst browsing MWS related stuff online. Thought I'd get in on the action and share mine with you all for your perusal, comments and opinions. I use this as a race gun. 3 gun competition. I run it on .40 nuprol rzrs and ASG Ultrair.
MTR grip and stock,
Guns modify adjustable trigger set,
PTS Centurion Rail,
16" outer barrel,
F1 compensator, upgraded nozzle, selectors, big mag release, bad lever, RT Tactical magwell (3d printed),
Vortex Razor HDii. 1-6 x 24mm,
Vortex cantilever mount,
Vortex venom 3moa mrds.
View attachment 47789
View attachment 47790
MTR grip and stock,
Guns modify adjustable trigger set,
PTS Centurion Rail,
16" outer barrel,
F1 compensator, upgraded nozzle, selectors, big mag release, bad lever, RT Tactical magwell (3d printed),
Vortex Razor HDii. 1-6 x 24mm,
Vortex cantilever mount,
Vortex venom 3moa mrds.
View attachment 47789
View attachment 47790
need some help guys,
the question is...
to paint or not to paint?
and if I should paint, In what style?
thanks in advance
View attachment 47676
Personally I like a painted gun, but I wouldn't go painting a cerokoted mws though. Leave that for the cheaper poorly finished guns. I use
https://www.freedomstencils.com/
They're not cheap but give a nice finish in my opinion. Here's some examples I've done with krylon matt finish sprays. Taken to bare metal, primed, sprayed and clear coated at the end. That's my 2 cents.
View attachment 47791
View attachment 47792
View attachment 47793
Are you looking for the inner and outer Barrel and the hand guard etc? I have an TM inner barrel (I have 2 in fact) and a hand guard plus fittings. I can't help you with the outer though.
Last edited by a moderator:
Welcome! and that is one sexy gun!
I really like the rail mind telling me where you get that from? and how long is the rail roughly? I am thinking of using this rail with a silencer what do you think?
I have the BAD lever as well but the weird thing is after installing the bad lever the bolt catch doesn't work consistently. I tried following the advice of one of the fellow members here but that didnt solve the problem for me
Welcome to the thread Jake!
Welcome! and that is one sexy gun!
I really like the rail mind telling me where you get that from? and how long is the rail roughly? I am thinking of using this rail with a silencer what do you think?
I have the BAD lever as well but the weird thing is after installing the bad lever the bolt catch doesn't work consistently. I tried following the advice of one of the fellow members here but that didnt solve the problem for me
If memory serves, it came directly from APS but I'm not sure you can order it as a standalone item so you might struggle to obtain it.
Welcome! and that is one sexy gun!
I really like the rail mind telling me where you get that from? and how long is the rail roughly? I am thinking of using this rail with a silencer what do you think?
I have the BAD lever as well but the weird thing is after installing the bad lever the bolt catch doesn't work consistently. I tried following the advice of one of the fellow members here but that didnt solve the problem for me
Get the rail from here. It's a 12.5" https://www.ptssyndicate.com/products/pts-centurion-arms-cmr-rail-125-gen-2
The bad lever does affect the bolt catch and it's something I might well remove... Looks badass never the less. Haha. If your going to run a silencer you should get the b&t https://www.airsoftworld.net/bandt-rotex-iii-quick-detach-suppressor-grey.html I have the short one in grey and it's beautiful. Again added realism over a generic screw on 'airsoft suppresor'.
See photo with it on my Systema. Plus other Gucci stuff like my thermal sight, vortex light hunter and it's goodies ?
View attachment 47814
View attachment 47815
Last edited by a moderator:
Hey everybody, new buckings from modify,
for vsr and gbb...also an r hop View attachment 47817View attachment 47818
for vsr and gbb...also an r hop View attachment 47817View attachment 47818
Similar threads
