THE TM MWS thread

[Crazy_Crystal]

I, umm. wow...

I agree, you might need a new upper there ?

 

[RobHedley]

I wish I hadn't asked now..... that image will always stick with me!!

I am going to go home and cuddle my MWS tonight!. Gentlemen, a minutes silence for @LVOA-Ds upper please.

I hope you get an upper sorted soon. I will keep an eye out as well. 

 

[LVOA-D]

Thanks for the compassion lads, much appreciated! ? Worst case scenario I might have to get either A) a new MWS (anyone need spares? ?) or B) a 600-700 euro CNC aluminum receiver set...

Both are not optimal but I do eventually want a working MWS again. So far everything is looking good with the purchase I made on eBay, payment went through and no message that it isn't in stock so let's pray to god it's here soon.

 

[Lozart]

Thanks for the compassion lads, much appreciated! ? Worst case scenario I might have to get either A) a new MWS (anyone need spares? ?) or B) a 600-700 euro CNC aluminum receiver set...

Both are not optimal but I do eventually want a working MWS again. So far everything is looking good with the purchase I made on eBay, payment went through and no message that it isn't in stock so let's pray to god it's here soon.

I know it's not a cheap option but there is a John Wick Taran Tactical conversion kit available for the MWS now....

 

[LVOA-D]

@Lozart I have seen that yes, shame I don't really need all the stuff that comes with it, at most I'd use the upper and lower, not really digging the rest I must say. Plus I'd be stuck with almost a complete set of Strike Industries stuff I don't have a use for.

Also the price, I can get 2 MWS' for that money ?.

 

[RobHedley]

Having looked at the VLTOR gas blocks and being shocked at the price of them. I decided give a cheaper option a go first. Ordered this low profile gas block to replace the front sight version and so far I am impressed. Made of machined aluminium and should look sweet once it’s on. Best thing is it only cost £8 from Patrol Base!! ?

View attachment 45601

View attachment 45602

 

[RobHedley]

All fitted and looking low profile. Took no time at all but make sure you have some very small punches to pop the pins bout of the foresight.

I co-witnessed the holosight before removing the front and rear iron sights so it should be pretty close to sighted. Off the the UCAP Bunker in Portsmouth tonight so it will be the first skirmish with the MWS!! Exciting!

View attachment 45606

View attachment 45607

View attachment 45608

 

[Prometh]

Hey guys, 

I'm looking to buy an mws soon but im still in doubt of getting a regular mws or a cqbr. 

is there any difference except barrel length? 

 

[itsme]

Hey guys, 

I'm looking to buy a TM MWS but i'm not sure if i want the MWS or CQBR. 

Do both have the same reliability? 

Is there any other difference than barrel length? 

im probably replacing the rail and grip, what kind of rails will and grips will fit? 

It will be my first gbbr so not sure where to start. 

Thanks guys!

 

[RobHedley]

Hi @itsme, 

They are both the same apart from (as you said) the barrel length. 250mm on the CQBR and 330mm(???) on the M4A1. The internals are identical apart from that. The photos above your post are of my CQBR. 

It all depends what you are going to be using it for. If you are outdoors, then maybe go for the longer version or if you are indoors/CQB then the CQBR is perfect. In fact the CQBR in stock form is still amazing outdoors and easily out performs my AEG. I went the CQBR route as I play a lot in the underground tunnels and the prison down in Portsmouth. That said I am looking to purchase a second one and create an outdoor specific version.

I assume you have read through the topic pages (lots of) as there is a treasure trove of information and there are lots of guys on here that know way more than me ( @Wo1f @Davegolf etc). Let us know which way you go.

 

[itsme]

Hi  @RobHedley 
 

Thanks for the super quick reply mate!

I play some outdoor but most of the time i'm indoor playing with my hpa tapped hi capa.

I'm so glad i found this forums/topic. I've been reading for 2 hours now and i can't wait to finally get my gbbr. when i first bought my aeg people talked me out of a gbbr because of the belgian weather but it doesn't seem to much of a problem for the mws. 

Does it really outperform let's say a G&G quality replica with mosfet and a 6.01 barrel?

I love the fact i wont be able to mag dump and actually reload. Time to make every shot count as i do with my hi capa. I'll be browsing this topic a whole lot more  

 

[RobHedley]

@itsme With a tight bore barrel, the SixG Super Nub and a Modify Tan bucking, guys are getting .4s out to 80m consistently. As stock my CQBR is sending .3s out to 50m - 60m (measured by eye as don’t have a range finder). I have a couple of super nubs and modify tan buckings so plan on fitting to see how it changes the range. Although don’t know if it is worth it on the CQBR as it is already shooting way further than I will ever need where I skirmish indoors.

 

[LVOA-D]

@RobHedley Gasblock looks great man! Must say you do need some irons though, your rail looks naked ?. Still awaiting my gasblock from Strike Industries (obviously). Shame I don’t have a RIF to put it on at the moment...

 

[RobHedley]

@itsme With a tight bore barrel, the SixG Super Nub and a Modify Tan bucking, guys are getting .4s out to 80m consistently. As stock my CQBR is sending .3s out to 50m - 60m (measured by eye as don’t have a range finder). I have a couple of super nubs and modify tan buckings so plan on fitting to see how it changes the range. Although don’t know if it is worth it on the CQBR as it is already shooting way further than I will ever need where I skirmish indoors.

 

[ImTriggerHappy]

@itsme With a tight bore barrel, the SixG Super Nub and a Modify Tan bucking, guys are getting .4s out to 80m consistently. As stock my CQBR is sending .3s out to 50m - 60m (measured by eye as don’t have a range finder). I have a couple of super nubs and modify tan buckings so plan on fitting to see how it changes the range. Although don’t know if it is worth it on the CQBR as it is already shooting way further than I will ever need where I skirmish indoors.

Airsoft metres are a magical thing they single handedly prove wormhole theory.

 

[Jacket]

Hey guys, 

I'm looking to buy a TM MWS but i'm not sure if i want the MWS or CQBR. 

Do both have the same reliability? 

Is there any other difference than barrel length? 

im probably replacing the rail and grip, what kind of rails will and grips will fit? 

It will be my first gbbr so not sure where to start. 

Thanks guys!

The inner barrel on both is 250mm so no difference in performance. The normal MWS can take upto a 370mm barrel

 

[LVOA-D]

Starting to get a bit worried about getting a new upper Delivery date for my order on eBay shifted to around the 14th of June. Doubt they actually have it in stock so if I don't hear anything by next week I will cancel it and refund it. Not sure where else to check as I think

I checked pretty much every webshop in Europe, Asia and even the US just to make sure. As much as I love the MWS, sometimes I wish I would have just gone with the GHK because I find it ridiculous spare parts from such a large brand are pretty much unobtainable. Not sure what

way to go at the moment. /rant!

 

[Fissure]

*ignore*

 

[Wo1f]

Airsoft metres are a magical thing they single handedly prove wormhole theory.

All of my results are with a rangefinder ?

 

[RobHedley]

Airsoft metres are a magical thing they single handedly prove wormhole theory.

Last night before heading off to The Bunker, I borrowed one of those wheel measuring thingies off a surveyor neighbour and measured the distance from shooting spot to target spot. 51.4 metres ??