• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

THE TM MWS thread

My Recent TM MWS skirmishing experience yesterday on 03-03-19 at The Plantation Airsoft, Billericay, Essex.

I must say that often when i take guns out for their first outing i'm always a bit apprehensive of how they will perform because whilst i can tech and chrono at home, i have no way to test range and accuracy. My GHK M4 Mod1 and Ares WA2000 are recent prime examples of this when on their first outing they really failed to impress me with their range despite the amount of money i had sank into hop up and barrel upgrades hoping that they would hit the mark.

So recently as some of you may know i got hold of this TM MWS second hand, it had already had some some changes (i put the gold on it, it was stock when i got it), i didn't like the 7" RIS rail (too short), didn't like the fact that the inner barrel extended through the flash hider and whilst the pistol grip and stock were Magpul inspired, they weren't REAL Magpul (PTS i think).

BEFORE

View attachment 43178

SO i put a barrel extender on it to lengthen the outer barrel by 2 inches so that the flash hider would clear the inner barrel, but this necessitated a 9inch RIS rail which i bought from Wolf Armouries, i went to my GHK M4 Mod 1 and removed the Vortex Optics StrikeFire Red dot sight, the real steel Magpul pistol grip and Magpul MOE stock and put it on the MWS. Had a small issue with the BCG not locking back (see pages 31 to 33 of this thread) but between me and Nathan the Tech at Airsoft Zone we deduced that it must be the BCG and magazine springs, he also kindly installed a lightweight bolt catch in my MWS which i brought into the shop with me. Stretching the magazine springs out solved the issue.

AFTER

View attachment 43176

Now she was battle ready or so i hoped as i had not tested the accuracy or range of my TM MWS, i was hoping that it would be like how my TM M92FS wow'd me the first time i used it where the BB seem to travel for miles out ranging even AEGs.

First skirmish day at The Plantation Airsoft, Billericay. (MUDDY AF due to recent rain)

I'm apprehensive to say the least, i have brought the MWS but also my trusty SAI M4 HPA gun as i know that one works. Mags are loaded and gassed.

Take the MWS to the range, hop is set to completely off, using .25g BBs and fired the first shot.

OMG! BB flew decently far, with hop off? Adjusted the hop, a little of backward and forwarding and i got it just right. BBs flew for miles straight, i was IMPRESSED!
I played the first half of the day with the TM and loved it, more so than when i used the GHK M4 MOD1. I knew i could pull the trigger and the MWS would reliably work whereas the GHK was pull the trigger and please work?!

My only complaint is that i had to adjust my game style, no more burst autoing every where or i would have no more ammo, i had to go back to the safe zone twice in two staggered games to re gas and reload but i was much happier using the TM MWS.

It did make me wonder, why did i buy the GHK, when i wanted a GBBR the TM MWS was on my potentials list but i dismissed it since it would mean that if i wanted to install a keymod rail, i would have to buy a rail, a barrel spacer, get rid of that triangle sight etc etc. But i still would have saved money if i didn't buy the GHK, i am now strongly considering selling the GHK as its surplus to needs.

To the future, i'm probably going to leave the MWS like this because "IT WORKS". I know there's this magical brass nub thingy but I don't want to fiddle removing the hop and stuff otherwise the TM hop fairy dust might be blown away.

I might just buy some more Magpuls for the mags and possibly get a Gold BCG but that's it really.

 
@Shizbazki Success! I've owned 3 GHK m4's (One of which i built from a forged receiver) and while they're nice, they just don't perform like the MWS does. If you're only gonna be using .28's or less, there's no real need to touch it internally. The nub makes a massive difference when using heavier BB's, which the standard one can't lift. I run my CASV mws (310fps) on .32-36 and my mk12 mws (400fps) on .36-.45's

 
Good shout. Ordered one too.

With the dimensions being somewhat similar, will these fit GHK gas mags too?

 
I've had one for a bit. Skirmished 2 or 3 days with it and coming from hi caps I reload a lot. Its held out so far and it's night and day vs the plunger style 


Glad to hear it, :) I used to use an Odin with AEGs so with that in mind I hope this works just as well too.

From what you've said it will.

With the dimensions being somewhat similar, will these fit GHK gas mags too?


No idea personally, you'll soon find out.  ;) Won't fit my GHK as it's an AK :lol:

 
Last edited by a moderator:
Gas, Nuprol, I saw the chart, and read that 9bars is about the right pressure. So, in Norway, where summer falls on a Friday this year, and temperatures are around 20 C, should I use Nuprol Red 3.0? Or will green be enough? 

As long as I do not use too "powerful" gas at too warm temperatures there is no danger of breaking things? ?

#stupidquestions 

And, been playing around with setup. 

View attachment 43220

 
temperatures are around 20 C, should I use Nuprol Red 3.0? Or will green be enough? 


Generally speaking I use green when above 10c and red when below 10c.

I haven't used my MWS in cold weather but that's what I use in my pistols when temps are at those levels.

 
Shiz making the MWS desire even worse. Jesus H Christ...

 
Shiz making the MWS desire even worse. Jesus H Christ...
Do it!

visual representation of using an mws is game:

TangibleGleefulBoto-size_restricted.gif


 
Awesome, little SixG Super Nub arrived today. :) It's going in tonight...

 
Ok guys this is it! I have lost the fight against my rational self and ordered the gun. It should be in my hands in two weeks and I am feeling like a kid on his way to candy store. I am also spending huge amount of time on e-shops window shopping tons of upgrades, rails, stocks, sights and all other practical stuff as well. This will inevitably result into spending some more money for it in near future and because of that I had a really bad argument with my wallet. I am affraid I will have another one, even bigger, with my girlfriend when it all arrives. But it is a sacrifice I am willing to make. Long story short I am signing up to The Club.

What I plan is:

- six g nub

- modify tan bucking

- longer barrel

- m-lok or keymod lightweight rail

- super sexy looking stock

Though I have read this whole forum several times I still have some questions:

- Has the gun mil spec dimensions? Will real steel parts - handguards, stock a pistol grip - fit? I saw someone said BCM rail fits. Does it really fit without any modification?

- I understood I need that PTS adapter ring thingee OR use Dytac outer barrel if want to mount an AEG handguards/rails. Is it all I need or is there anything else?

- I would like to build a DMR so what inner barrel would you recommend? I saw Orga, Prometheus and Crazy jets has been mentioned before. I understand that Prometheus has some larger hop window. What is it? Is it compatible with sixG nub? We dont have limits for fps here so the more the better I suppose.

- Is it ok to prolong outer barrel with some after market extension? I would not want to have some wobbling in there or have different diameters which would bend the inner barrel etc.

Sorry for long post but I am really looking forward to have it. If it is only half awesome as everybody says I will be a pretty happy bastard:-D.

Cheers fellow MWSers.

 
@M.a.r.v.i.n welcome!! :D

As above, get a PTS ring, mil spec parts fit.

Watch this space on the DMR front.

Run the Super Nub, Modify bucking, stock TM barrel, high power gas, stiffer recoil buffer spring and high quality 0.32 or 0.36 BBs, that'll work awesomely for circa 60M

 
Despite the shit weather, DMR news will be here tomorrow night. I’ll just have to get wet ?

 
My MWS is happily spitting out 0.32 with the SixG nub. <Insert James Bond Villain chuckle here> :lol:

 
My MWS is happily spitting out 0.32 with the SixG nub. <Insert James Bond Villain chuckle here> :lol:
You playing at the weekend? If so, let us know how you get on with it. My aim for tomorrow is an 80m kill.

 
Back
Top