THE TM MWS thread

[Immortal]

It's sitting next to me like a newborn at the mo. :lol:

Just waiting for some down time to have a pop now.

Think I'll source a sling loop for the A-sight so I can put a two point sling on it.

It's odd they don't put one on. I wonder why? No biggy....

Just waiting for the buckings now but I'll have a go in the meantime. ?

 

[Guest]

Dont forget your SixG nub

 

[Immortal]

Dont forget your SixG nub

I'll try the TNT APS-X nub I've got leftover from my AK, it looks near identical. If not then good call. ?

 

[Guest]

So........does anybody want me to build them a drum mag for their MWS/MTR?

 

[Immortal]

So........does anybody want me to build them a drum mag for their MWS/MTR?

Defo once my account settles down! That would be brilliant. ? (secretly my subconcious is saying yes already...)

Just been playing about with it getting familiar with the feel. Been a while since I fired off a real one and it feels spot on.

Why oh why have I waited so long before taking the plunge, it's awesome and I haven't even shot it yet. :lol:

 

[Wo1f]

So........does anybody want me to build them a drum mag for their MWS/MTR?

Me ? where’s the best place to get an AW drum?

 

[Guest]

Me ? where’s the best place to get an AW drum?

BZ Tactical have them for £140, or KYairsoft have them for $92 

 

[Wo1f]

Found an all black one for £129

 

[Guest]

Found an all black one for £129

Excellent, who is that?

 

[xB0SHx]

So........does anybody want me to build them a drum mag for their MWS/MTR?

Me! Me! 

I'll have to get on that street corner for a bit first though. 

 

[Immortal]

Fellas, which gas valve tool is the right one for the MWS mags?

I need to order one as I don't think the one I have will work with these.

I would like to do the green gas mod to my mags....

 

[xB0SHx]

Fellas, which gas valve tool is the right one for the MWS mags?

I need to order one as I don't think the one I have will work with these.

I would like to do the green gas mod to my mags....

I'm unsure. I do know that the we one definitely isn't right. The teeth are too thick. I filed mine down slightly and it worked 

 

[Wo1f]

@rocketdogbert extreme airsoft. I’m enquiring with a friend about getting one at cost price. 

@Immortal you don’t need a valve key to do the green gas mod, just an Allen key. I’d advice cutting the tubes and not removing them all together. 

 

[Immortal]

 you don’t need a valve key to do the green gas mod, just an Allen key. I’d advice cutting the tubes and not removing them all together.  

Oh, Cool! I'll get right on with it then. Thank you. ?

Curious though, why not remove them? Is it because it's easier and less risk of damage?

 

[Immortal]

you don’t need a valve key to do the green gas mod, just an Allen key. I’d advice cutting the tubes and not removing them all together.  

Sorry Wolf to ask again; the baddabing vid shows him using a valve key to remove th valve and to my eyes can't be unscewed with out one? I mean it's a two part slot with the fill valve in the centre of the brass. I can't see how to remove it without a key?

I've used an Allen key to remove the base plate but how can I remove the next part to gain access to the tube with an allen?

Not sure what I'm missing here?

View attachment 42128

 

[Wo1f]

Oh, Cool! I'll get right on with it then. Thank you. ?

Curious though, why not remove them? Is it because it's easier and less risk of damage?

2 reasons.. it helps with FPS consistency to leave some of the tube. But most importantly... they’ve glued them in that badly, you’ll never get it out anyway ?

trim it to 5-10mm above the brass valve inside 

Just put a screwdriver in one side. I found they weren’t particularly tight. 

 

[Immortal]

Just put a screwdriver in one side. I found they weren’t particularly tight. 

OK thank you. I'll do that. I was stumped when you said an Allen would do the job. lol :lol:

 

[Wo1f]

OK thank you. I'll do that. I was stumped when you said an Allen would do the job. lol :lol:

I’ve done it with a 2mm Allen key before. You can put it in one of the two groves and twist. 

 

[Immortal]

Just put a screwdriver in one side. I found they weren’t particularly tight. 

You were right of course o'guru of all things MWS. Turned out easy. Choppy choppy time. ?

 

[Wo1f]

I’d fill it with gas before you put the spring and plate back on so you know there’s no leaks. That feed spring was a right fiddly bastard for me ?