THE TM MWS thread

[Immortal]

I’d fill it with gas before you put the spring and plate back on so you know there’s no leaks. That feed spring was a right fiddly bastard for me ?

I'll give it a go ? One down, 3 to go. I cut it to 6mm above the brass tube.

Filled the tube with a piece of kitchen paper to keep the inners clean and wrapped the outer valve to keep that clean too. Diamond cut the tube off and round filed the burrs. Job done. I'm on a mission. :lol:

EDIT 1: No leaks ?

EDIT 2: Tan Buckings just arrived.

 

[Wo1f]

I'll give it a go ? One down, 3 to go. I cut it to 6mm above the brass tube.

Filled the tube with a piece of kitchen paper to keep the inners clean and wrapped the outer valve to keep that clean too. Diamond cut the tube off and round filed the burrs. Job done. I'm on a mission. :lol:

EDIT 1: No leaks ?

EDIT 2: Tan Buckings just arrived.

Excellent! What gas are you running? I’ve just been testing some guarder power up gas and it’s even better than propane in this freezing weather. 

 

[Immortal]

Excellent! What gas are you running? I’ve just been testing some guarder power up gas and it’s even better than propane in this freezing weather. 

I just gave it a squirt of green gas purely for leak checks. Just what I had laying about really, sloppy nuprol 2.0. I've also got Red 3.0 and Abbey 144a gas too. Propane interests me but I'll have to check my site allows it as out of the few I've played I know one definitely doesn't which just happens to be a place I no longer go. None of it's been run through the MWS as of yet, just my thumb pushing the valve to check it was all working and that the part I took out and modded is air tight too.

Is Guarder power up gas clean and what sort of FPS does it give you?

I'll be looking to keep mine around the 350 mark. I only really play on semi but I like to have the option to let a few rip for a laugh sometimes. I haven't chono'd it or anything yet so I don't know if I'll need an NPAS or similar yet.

My MP5K runs on red year round with the NPAS fully open and it sits happily at 350 fps.

EDIT: Think I may have put the follower spring in backwards on the first mag, oops.

Guess I'll have to open it up again. :lol:

 

[Immortal]

All Mag mods done, all hold a seal. ?

Next stop: Install the Tan bucking & try the nub I mentioned.

I might actually get to fire a shot off soon... Fun stuff. :lol:

This is the TNT APS-X nub I have, it's like a dumb bell for an Ant. Not quite as rounded as the super nub:

View attachment 42134

 

[Wo1f]

I’ve never heard of a place banning propane.. all green gas is propane and silicone oil. 

I’m not entirely sure what ‘blend’ power up gas is. It functions and smells just like green gas. I imagine it’s like Nuprol black, but I’ve never tried it. Gives about a 15fps boost and a much crisper cycle in this lousy weather.  Even makes my Gas SR-25 run like a champ in the cold. 

A WE mp5k? I’ve got the pdw and love it. Heavy little thing though. 

All Mag mods done, all hold a seal. ?

Next stop: Install the Tan bucking & try the nub I mentioned.

I might actually get to fire a shot off soon... Fun stuff. :lol:

This is the TNT APS-X nub I have, it's like a dumb bell for an Ant. Not quite as rounded as the super nub:

View attachment 42134

That nub should be fine. Just make sure if it’s smaller than the window to center it well.

 

[Immortal]

I’ve never heard of a place banning propane.. all green gas is propane and silicone oil. 

I’m not entirely sure what ‘blend’ power up gas is. It functions and smells just like green gas. I imagine it’s like Nuprol black, but I’ve never tried it. Gives about a 15fps boost and a much crisper cycle in this lousy weather.  Even makes my Gas SR-25 run like a champ in the cold. 

A WE mp5k? I’ve got the pdw and love it. Heavy little thing though. 

I know right, OK propane has the gassy smell but if they say no then there's little reasoning with them. Like you said Green's the same thing with silicon. Red is propane and a little ethane Not sure if Nuprol black is just more ethane again but traditionally black gas was always Co2 in non-airsoft circles.

Yes a WE MP5K; NPAS installed and I've got the full set of Z-parts for it but have yet to get round to installing them. It is a little weighty but it's funky and fun. Hops really well so apart from the NPAS it's stock.

The other GBBR is a GHK AK74UN with hispeed buffer and a TNT APS-X T hop & barrel (a different TNT APS-X hop to the one this nub has come from which is a TR Hop however it was never reliable). Good shooter but metal Mags are a bitch (specifically the AKM metal ones, the locking lips like to move as they're only crimped on - again been meaning to apoxy them in place).

 

[Immortal]

So........does anybody want me to build them a drum mag for their MWS/MTR?

OK, this has been on my mind all day whilst modding the mags. Would it be a case of me supplying the parts and you combining them or would you be happy to give me a price for a "job done here you go enjoy" sale? :lol: Feel free to PM me!

I feel I need this and whilst the chance is there I'd be daft to miss out. ?

 

[Guest]

OK, this has been on my mind all day whilst modding the mags. Would it be a case of me supplying the parts and you combining them or would you be happy to give me a price for a "job done here you go enjoy" sale? :lol: Feel free to PM me!

I feel I need this and whilst the chance is there I'd be daft to miss out. ?

You have PM matey ??

 

[Immortal]

@Wo1f I take it it's an absolute mission to get to the hop unit from what I can see.

Look's like I'll have to take the whole front section apart to release it? Outer barrel the lot?

Mercy.... :lol: .... that can wait till tomorrow! I'm sure thinking about it is perhaps worse than reality?!

 

[Guest]

@Wo1f I take it it's an absolute mission to get to the hop unit from what I can see.

Look's like I'll have to take the whole front section apart to release it? Outer barrel the lot?

Mercy.... :lol: .... that can wait till tomorrow! I'm sure thinking about it is perhaps worse than reality?!

Yup, rail /and barrel out jobby ??

 

[Immortal]

Yup, rail /and barrel out jobby ??

I'll bite that bullet tomorrow, thanks for the confirmation ?

(secretly I hoped you'd say no, it just slides out without all the work :lol: )

 

[hunter511]

Evening ladies and gents.

Anyone know whats going on with the SixG super buckings. Seen a couple of posts saying payment made and no product amd others that have been trying to get in contact for a couple of months now?

 

[Jimmeh]

Evening ladies and gents.

Anyone know whats going on with the SixG super buckings. Seen a couple of posts saying payment made and no product amd others that have been trying to get in contact for a couple of months now?

I ordered mine at the beginning of December and received inside a week! He’s a one man band I believe so I think just bear with? What’s the longest anyone has waited?

 

[Guest]

Ordered mine a few weeks ago, heposted them out a couple of days later, sorted

 

[hunter511]

Awesome.

Now all I need is him to reply to my emails then.

 

[xB0SHx]

OK, this has been on my mind all day whilst modding the mags. Would it be a case of me supplying the parts and you combining them or would you be happy to give me a price for a "job done here you go enjoy" sale? :lol: Feel free to PM me!

I feel I need this and whilst the chance is there I'd be daft to miss out. ?

I'm also curious about this because let's be honest it's gonna happen anyway so why delay the inevitable 

Awesome.

Now all I need is him to reply to my emails then.

He's not the best at keeping you updated but I ordered a couple weeks ago and it came within a couple days. 

 

[Kayzeroth]

hello guys, does anyone knows where to get a good 6.01 400mm inner barrel? thanks in advance looking for a "DMR"ish set on a MTR16

 

[Guest]

I'm also curious about this because let's be honest it's gonna happen anyway so why delay the inevitable 

Anyway you like, I’m not worried. Send me the bits or I’ll supply, doesn’t matter to me, whatever is best for you??

 

[xB0SHx]

Anyway you like, I’m not worried. Send me the bits or I’ll supply, doesn’t matter to me, whatever is best for you??

If you were to supply it all and just send finished product what would you be looking at charging?

 

[Immortal]