• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

The AAP-01 Owners Thread.

@SkaratSkara this is something. I've not found but I don't have a hi cappa and up until yesterday I'd only run m&p and baretta pistols.

Thank you for the advice.

Another question.

Are A.w.e magazines any good?

I hadn't seen the name before and the are tagged with being for the aap but I hesitated as I don't know them.

 
concretesnail said:
@SkaratSkara this is something. I've not found but I don't have a hi cappa and up until yesterday I'd only run m&p and baretta pistols.

Thank you for the advice.

Another question.

Are A.w.e magazines any good?

I hadn't seen the name before and the are tagged with being for the aap but I hesitated as I don't know them.
Click to expand...
Armorer works?

They're WEs with fancy red gas routers, I have one 50 rounder which works really really well :)

 
Skara said:
Armorer works?

They're WEs with fancy red gas routers, I have one 50 rounder which works really really well :)
Click to expand...
It's not armour works, I know them, these are tagged A.W.E. and I can only find them on airsoft world website. I'm starting to think that they are a rebrand/dealer own kind of thing.

 
Spartan09 said:
Just looked..   airsoftworld are out of stock for the hammer...

The search goes on...  (though im in no rush as i wont be going airsoft for a couple of months so i can save some money)
Click to expand...
Hey Spartan,

Looks like airsoftworld have a new CNC hammer in made by CTM and it's £14.95. They say it's quote "full CNC'd steel meaning it's rock solid and won't break unlike other 'alloy' made counterparts.  It's even QPQ hardened (Google it :)) for extra durability and corrosion resistance".

https://www.airsoftworld.net/ctm-steel-hammer-for-the-aap-01-and-tokyo-marui-glock-compatibles.html

 
AlphaBear said:
Hey Spartan,

Looks like airsoftworld have a new CNC hammer in made by CTM and it's £14.95. They say it's quote "full CNC'd steel meaning it's rock solid and won't break unlike other 'alloy' made counterparts.  It's even QPQ hardened (Google it :)) for extra durability and corrosion resistance".

https://www.airsoftworld.net/ctm-steel-hammer-for-the-aap-01-and-tokyo-marui-glock-compatibles.html
Click to expand...
just looked at that one.
it says its for the AAP AND glock 18...   does anyone know if this is a straight drop in, or will it require fettling like some of the other "dual-fitment" hammers that have been for sale before?

 
found an action army hammer in stock with tango down airsoft and ordered it.

hopefully it will be here by the end of the week so i can rebuilt it ready for the weekend.

 
Hey all, I am finally part of the club after receiving my AAP a few weeks back. I was never a fan of the looks (which has now grown on me) but these looked like so much fun to use and at the price point it's hard to say no. I am looking to fit my x300 torch but cannot for the life of me find a rail set in stock anywhere. My question is, does anyone know where there are AAP-01 accessories in stock or is there somebody 3d printing rails? Thanks

 
I have a few questions on what I should put in my budget hi CAPA. (The AAP 01) I want to have the stock internals completely upgraded with these ones. Should I add or subtract any of these. Is there any of these I don't need to spend the money on because the stock internals are just as good. I want to start building this monstrosity soon.

https://shop.jkarmy.com/cow-aap01-stainless-steel-hammer-set-for-aap01-gbb-aap-01.html

https://shop.jkarmy.com/cow-aap01-enhance-plastic-nozzle-set-for-aap01-gbbp-series-aap-01.html

https://shop.jkarmy.com/action-army-cnc-magwell-for-aap01-black-red.html

https://shop.jkarmy.com/tti-airsoft-selector-switch-charge-handle-for-aap-01-gbb-pistol.html

https://shop.jkarmy.com/action-army-aap01-black-mamba-cnc-upper-receiver-kit-b-aap-01.html

 
The hammer is necessary.  I thought about the selector switch but ultimately decided against it as I only use semi. Full auto is for those showing off moments but are so far between I couldn't really see the point in installing it. 

The only thing currently upgraded internally on mine is the hammer as the original melted on me. There will be a new trigger and a waldo short stroke kit in it soon but I cannot really comment on the nozzle set.

Magwell and slide are purely gun bling really. I like the mamba slide but dont want to pay that price for it, I have a magwell but currently its not installed as it doesnt play nice with a drum mag.

 
From what Iv'e been seeing on social media, Waldo and Matt from iMakeit3D both have some new AAP-01 parts in their respective pipelines!

 
What a load of ball bags.

I've not stripped it down yet but my AAP-SMG has shit it's hammer AGAIN by the looks of it.

I replaced it with the updated AA version as I couldn't get a CowCow at the time.

I'm genuinely considering just selling all the bits off it and forgetting it ever happened ?

 
leadly said:
What a load of ball bags.

I've not stripped it down yet but my AAP-SMG has shit it's hammer AGAIN by the looks of it.

I replaced it with the updated AA version as I couldn't get a CowCow at the time.

I'm genuinely considering just selling all the bits off it and forgetting it ever happened ?
Click to expand...
That sucks!

It appears that the only option is to get a CowCow set then...

Great, the thing is impossible to get here in Italy..I guess I'm fucked :D

 
It's genuinely frustrating. Probably had no more than 1000 rounds down it since I replaced the hammer and that's being pretty generous.

I've made a point of not using full auto on it either. Yes it's been ran on HPA, but haven't used anything above 80 PSI. I normally get away with setting my reg for my MTW, which is about 75psi and that covers my AAP, MK23 and Hi Capa quite nicely.

 
Last edited by a moderator:
leadly said:
... my AAP-SMG has shit it's hammer AGAIN by the looks of it.

I replaced it with the updated AA version...
Click to expand...


The Action Army CNC Steel Hammer or the stock version 2 hammer found in the newer AAP-01's?

 
Ok so I was wrong, this time it was the auto sear. Or atleast i think it is 

Is that the auto sear or what's left of it there?

EDIT: Valve Knocker Sear apparently

View attachment 82916

 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

K
Stacatto C2 rear sight replacement?
Replies
1
Views
170
BigAl
BigAl
BRThoughts
AAP-01 standard magazine spring too weak?
Replies
7
Views
1K
Mik3F
M
Lord_Mandrake
Advice needed re: VFC/Umarex G36C V2 GBBR - HPA build
Replies
8
Views
864
ButcherBill
ButcherBill
JDesai
Aap-01 bolt binding on full auto
Replies
4
Views
1K
JDesai
JDesai
Impulse
G&G m700 knock arm and plunger set issues
Replies
6
Views
1K
Impulse
Impulse
Back
Top