Magazine doesn't fit?

[AJPaget]

I bought a brand new Krytac CRB, it arrived and the magazine doesn't fit in the gun?? Has anyone else had this experience? Totally shocked to get this from a brand new gun.

 

[PT247]

the standard mags fit absolutely fine in both my Krytacs! You sure you pushing it in hard enough? iirc the mag release spring was tight when new

 

[AJPaget]

I'm pretty sure to release the mag I have to shimmy it from side to side, it's so bad it's taking the paint off of the mag itself! I don't know if it's a dodgy mag or gun? As my A&K high caps are the complete opposite fit in fine but they are to lose and the catch doesn't hold them in. So strange

 

[PT247]

the only type of mag I have that are a tight fit are some short p-mags.

 

[AJPaget]

I'll contact the seller and send it back I think

 

[AJPaget]

the only type of mag I have that are a tight fit are some short p-mags.

Click to shrink...

Can I ask what Mags and Batteries you use in your Krytac CRB please PT?

 

[PT247]

http://www.surplusstore.co.uk/we-11-1v-1450mah-25c-crane.html

http://www.fire-support.co.uk/product/socom-gear-850rds-hicap-fat-m4-magazine-black

http://www.surplusstore.co.uk/bb-guns/bb-gun-accessories/airsoft-magazines/electric-gun-magazines/electric-rifle-magazines/m4-hicap-pull-cord-magazine.html

Don't have a CRB, have the SPR and PDW which the receivers are identical to the CRB, the SPR has the same stock as the CRB

 

[Baz JJ]

My standard hi-cap that came with the CRB fits fine. It wobbles slightly but no more than other makers guns. It goes in with a reassuring click. Certainly feeds ok.

I am now using EPMs as I need mid caps most of the time.

Just a thought, check to see they havent switched mags on you. The Krytac has a small hole for you to stick a winding key in.

 

[AJPaget]

My standard hi-cap that came with the CRB fits fine. It wobbles slightly but no more than other makers guns. It goes in with a reassuring click. Certainly feeds ok.

I am now using EPMs as I need mid caps most of the time.

Just a thought, check to see they havent switched mags on you. The Krytac has a small hole for you to stick a winding key in.

Click to shrink...

I think mine must b defective in some way then, just not sure if it's the rifle or the magazine

 

[Shizbazki]

Is it the actual Mag well thats tight or the mag release catch? If its the catch then try adjusting it