Magazine doesn't fit?

A

AJPaget

Members
Joined
Mar 19, 2016
Messages
30
Reaction score
1
I bought a brand new Krytac CRB, it arrived and the magazine doesn't fit in the gun?? Has anyone else had this experience? Totally shocked to get this from a brand new gun.

 
the standard mags fit absolutely fine in both my Krytacs! You sure you pushing it in hard enough? iirc the mag release spring was tight when new

 
I'm pretty sure to release the mag I have to shimmy it from side to side, it's so bad it's taking the paint off of the mag itself! I don't know if it's a dodgy mag or gun? As my A&K high caps are the complete opposite fit in fine but they are to lose and the catch doesn't hold them in. So strange

 
the only type of mag I have that are a tight fit are some short p-mags.

 
I'll contact the seller and send it back I think

 
My standard hi-cap that came with the CRB fits fine. It wobbles slightly but no more than other makers guns. It goes in with a reassuring click. Certainly feeds ok.

I am now using EPMs as I need mid caps most of the time.

Just a thought, check to see they havent switched mags on you. The Krytac has a small hole for you to stick a winding key in.

 
Last edited by a moderator:
Baz JJ said:
My standard hi-cap that came with the CRB fits fine. It wobbles slightly but no more than other makers guns. It goes in with a reassuring click. Certainly feeds ok.

I am now using EPMs as I need mid caps most of the time.

Just a thought, check to see they havent switched mags on you. The Krytac has a small hole for you to stick a winding key in.
Click to expand...
Click to shrink...
I think mine must b defective in some way then, just not sure if it's the rifle or the magazine

 
Is it the actual Mag well thats tight or the mag release catch? If its the catch then try adjusting it

 
You must log in or register to reply here.
Back
Top