www.usedairsoft.co.uk
He will swap his £80 broken JG gun for a sniper rifle. Aye, right!MP5K full metal
Moody mp5k. Spits BBs so it's hop up bucking or nozzle issue. Should be easy fix. Metal receiver 3 metal hi caps Pouch New red dot sight NiMH battery (sticking out- smaller lipo would be better) Big-ass charger (needs a mini tamiya battery cable) Can swap for a sniper rifle
"Easy fix"
www.usedairsoft.co.uk
a Dutch FAL is basically like any other FAL so unless you're trying really hard to be stitch accurate Dutch (and you could just use another FAL for it) there isn't a reason to spend £270 for an airsoft RIF. You can buy a metric FAL Wooden parts kits in the UK or via the US pretty easily and usually around the $300 mark. You used to be able to get deact SLRs or FALs in the UK for £300 as well.Would love to know where you're seeing furniture kits for the Dutch G1 for less than £270?
Edit: Spent the past hour looking for even just one Dutch FAL stock in the UK, there's none. I look forwards to seeing your source for a "way cheaper" one
www.usedairsoft.co.uk
I mean no ill will when I say this, but from the way you've been speaking about availability of parts, and of prices of deacts, you've been out of the loop for a moment, in the last two years alone i've watched prices for deactivated fals jump a couple of hundred pounds. Between the current economic climate, and the inevitable nature of surplus becoming more scarce with age, the prices of such things are increasing at a dramatic rate.
Not really. There’s key differences.
That’s subjective.
Wooden FAL parts, sure. Again though, not relevant to the Dutch FAL like he’s selling. The US will not sell firearm parts to the UK. Key words belng “Used to” but no longer the case, again also not relevant to the Dutch FAL.
Kalashnicarver won’t ship to the UK so that’s also irrelevant, not to mention his one is surplus and not a “reproduction” so again… irrelevant.
This RIF has been delisted and relisted so many times, every few hours almost. What's interesting is the fuse being blown is a new development. When it was £400+ that wasn't mentioned and was listed in the RIFS category.Tm colt m4a1 carbine
Non working fuse blew that’s all new fuse is all it needs to work
Fuse blew - that's all.....
Well of course, the L1A1 is far superior
You are clearly a very discerning gentleman.Well of course, the L1A1 is far superior
Austrian variant builder here. See my full steel VFC FAL in StG58 configuration (Still trying to source the bipod though)Hey buddy, so Kalashnicarver doesn't sell to the UK. Guess how I know. In fact, most places that sell fal parts, particularly in the US don't sell things outside of there.
It is a lot of money, no doubt about that, but it's also a piece of wood for a specific rifle that was manufactured roughly 60 years ago. I have spent FAR more on FAL stocks for specific kit, and this stock itself was brought from the Netherlands for 250, and needed some fair tlc to be something you'd want to put your face on.
I'm not expecting the average person to want to buy it, and that's all good. But as someone who has been buying and selling FAL stocks for some time, it's pretty fairly priced in the market. Getting FAL wood in the UK is pretty impossible (at least for metric) and buying outside of the UK is a hassle at best, a gamble with customs and taxes at worst. It also often requires going and finding people who are willing to sell it and post it to you, and as someone who has frequented Falfiles for some time, it's not always as easy as you think.
I'm fairly surprised I haven't seen this on here sooner, as a lot of folks aren't going to realise just how dire it is to aquire stuff like this without serious connections or effort. But I also have no illusions that this is a VERY specific part, so the right seller is probably few and far between, but I have time to spare, and I can't with good conscience lower it any further
Also in answer to your "just like any other fal" statement, the Dutch has a pretty specific sling loop on the buttplate, which is a sod to get in and of itself. There also folks out there who will spend 1000s on bits of kit that you can find reproduction from most airsoft stores for a fraction of the price, it just depends on the person, I frankly don't think it's on you to govern how people spend their money in this hobby.
If you can find me a metric fal parts kit in the UK, by all means please send the link to me, i'd love to investigate, as i'm still looking for parts a few years on
I will say that INCH stocks can still be found at a decent price in the UK, and even some airsoft websites sell the wood kits for them on occasion, however they require parts to convert them, and often at lower price points they will come almost too damaged to use, something I have also learned personally when I snapped up an Aussie stock for an slr build, it's more a suggestion of a stock than something i'd trust
It doesn't make sense when someone wants to build X and you recommend "just go for Y"
You are assuming all airsofters having the same idea towards how much is "worth". If only £270 would have let you say this, have a look at Viper Tech GBBs, none of them are below 4 figures even if you get it in the same place where it's manufactured, but personally they are quite worth the price.
I would so much love to hear more about your experience in this. Most of the US based shops don't ship to individual overseas buyers. The reason is simple, there are plenty enough of US based buyers, and the US customs makes it notoriously painful when it comes to importing and exporting firearms or related parts, so why would they ever risk it?
Or real steel rails and carry handles for an L119 A1 build
open to offers & recently single?Definitely not a dreamer as the seller is open to offers but the description made me laugh
Job lot of parts
Hi guys and girls, Just a job lot of parts some new some branded. Selling my cheating ex-husbands airsoft bits. Open to offers Thanks and have a great day Emma
I was on a site last night trying to figure out if the dutch furniture was available & saw a bipod so hunt around & you might find one.
, damn thing didn't even include the ferrule or buttplate 
, and at this price it becomes more bother than it's worth, to a degree. Appreicate the advice though 
, sometimes think i'm operating in the wrong market with this stuff . This is also not including the probable 100s of parts I have laying around for the FAL 
