• 2FA temporarily disabled, emails not working

    Two factor authentication (for most of you 'email a code') has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.

lense or kill flash for the sig romeo 5

Wegalaxy

Members
Joined
Apr 8, 2023
Messages
211
Reaction score
45
Hello,

Would anyone have a link to a lens protector or kill flash that fits the sig romeo 5?

Thanks

 
What's the outer barrel diameter of the Sig Romeo 5?

If it's either 26, 28 or 30mm, one of these push-on lens protectors would do the job.

https://projectairsoft.co.uk/collections/sight-accessories/products/28mm-red-dot-sight-lens-protector

I have the 28mm on one of my RDSs.

The shroud is 3D-printed so you probably won't get away with stretching a 26mm protector over a 27mm barrel.

Alternatively, if the diameter of the Romeo 5 is 28mm, you have this option from Patrol Base with a rubber shroud.

https://www.patrolbase.co.uk/wadsn-flashlight-protector

 
Last edited by a moderator:
Back
Top