-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
lense or kill flash for the sig romeo 5
- Thread starter Wegalaxy
- Start date
Galvatron
Members
- Jan 21, 2023
- 831
- 970
What's the outer barrel diameter of the Sig Romeo 5?
If it's either 26, 28 or 30mm, one of these push-on lens protectors would do the job.
https://projectairsoft.co.uk/collections/sight-accessories/products/28mm-red-dot-sight-lens-protector
I have the 28mm on one of my RDSs.
The shroud is 3D-printed so you probably won't get away with stretching a 26mm protector over a 27mm barrel.
Alternatively, if the diameter of the Romeo 5 is 28mm, you have this option from Patrol Base with a rubber shroud.
https://www.patrolbase.co.uk/wadsn-flashlight-protector
If it's either 26, 28 or 30mm, one of these push-on lens protectors would do the job.
https://projectairsoft.co.uk/collections/sight-accessories/products/28mm-red-dot-sight-lens-protector
I have the 28mm on one of my RDSs.
The shroud is 3D-printed so you probably won't get away with stretching a 26mm protector over a 27mm barrel.
Alternatively, if the diameter of the Romeo 5 is 28mm, you have this option from Patrol Base with a rubber shroud.
https://www.patrolbase.co.uk/wadsn-flashlight-protector
Last edited by a moderator:
The seller is away for a couple of days but for lens protectors would recommend reddotengineering on eBay.
https://www.ebay.co.uk/str/reddotengineering
https://www.ebay.co.uk/str/reddotengineering
Similar threads
