Hi capa cowcow nozzle help please.

[frazer900]

Hey guys so I'm fitting the cowcow pink hi capa nozzle, but the piston head doesn't stay in place? I watch the YouTube video that cowcow put up, and it shows them just placing it place but nothing holds it in and it doesn't stay in place ? I'm using the standard marui blowback housing and standard frame.

 

[frazer900]

Or is that how it is ment to be ? I feel like I'm being retarded

 

[Ronin0033]

There is usually a screw head exposed in the BBU that the piston head will pop onto.
I can’t tell from your pic but looks like yours may have broken off or been removed?

 

[ButcherBill]

View: https://youtu.be/wIzy_4Bp8q4?si=tZVObwTONXs6l5u5

 

[frazer900]

There is usually a screw head exposed in the BBU that the piston head will pop onto.
I can’t tell from your pic but looks like yours may have broken off or been removed?

Click to shrink...

Ah yeah I removed the screw to take off the standard piston head. Right put that back in and put that one over it ?

 

[Ronin0033]

Ah yeah I removed the screw to take off the standard piston head. Right put that back in and put that one over it ?

Click to shrink...

Yep that will do it. The screw is only there to hold the piston head on. Once you have the screw back in, the piston head should just push fit on

 

[frazer900]

Yep that will do it. The screw is only there to hold the piston head on. Once you have the screw back in, the piston head should just push fit on

Click to shrink...

Yeah that worked perfectly thanks buddy really appreciate it

 

[frazer900]

View: https://youtu.be/wIzy_4Bp8q4?si=tZVObwTONXs6l5u5

Click to shrink...

That's what I watched but wouldn't show me how it stayed on there I didn't realise the screw was ment to go back in after removing the old piston head.