Adolf Hamster
Supporters
- Feb 1, 2018
- 7,057
- 2,229
So I’ve decided to have a bit of a clearout, I normally have a policy of not selling gats but tbh I’ve reached the point where I’m only fielding a couple of guns so not much point keeping everything.
First up is a boneyard vsr clone, cost me £20 for the bare gun deactivated and with a few hand-me down parts she’s just about functional but not any better than a stock gun, maybe a good base if someone wants a shell to start off a build. Mainly got it to try out bolt guns and it’s just not my style.
Shooting ~0.8j, consistency is ok just a weak spring for our 1j limit.
View attachment 59944View attachment 59946
Reckoning maybe £40 scope included?
Next is an even more boneyard cybergun (kwc?) 1911, no mags and don’t let the externals fool you she’s pretty much dead inside, especially the trigger mech. Pretty much only good for parts, or if someone wants a pre-weathered a1 style body
No idea what she’s shooting, hasn’t been functional in a long time. No mags.
View attachment 59955View attachment 59954
£20 tops methinks?
Now we have a lockdown boredom project m4, built off an old king arms receiver, has an e&c qd gearbox and a hodge podge of internals, good compression although reckon the hop-nozzle seal isn’t quite right as she’s about 0.6j. she’s wired for a GATE mosfet, currently has a nanohard fitted but a warfet would be a straight swap. only cutoff lever I had that fit had been modded for an internal mosfet so she’s locked to semi. The red dot has a crack in the lens but is still functional.
Again, another parts/project gun.
View attachment 59939View attachment 59940View attachment 59941View attachment 59943
Maybe £75?
Finally we have a VLTOR front rail, pretty weathered but very much a solid piece of fore-end. Comes with the flip up sight and whatever bolt-on rail sections I can find. Was always too heavy for my liking:
View attachment 59957View attachment 59958View attachment 59959
No idea what these are worth, whether it’s legit or a clone, so any advice welcome.
First up is a “battle worn” tm hicapa, perfectly functional with 2 leak free mags. Mods wise she’s just running a pdi 6.01 inner barrel and home-brew tritium night sights (they’re not very bright but readable in darkness). Nothing wrong with her shooting wise, I just prefer running a makarov. Was keeping her as a night gun but I doubt I’m going to be doing many night shoots these days:
View attachment 59952View attachment 59953
Reckoning £75 all in?
Next is a 40mm launcher of unknown provenance, bit rattly and the safety has been removed to get enough movement to fire a 40-mike properly, otherwise perfectly functional if not pretty. Comes with a pair of 40-mikes that have seen some use but pretty good nick and work just fine. I just don’t get close enough to justify the extra weight of a tube….
View attachment 59947View attachment 59948View attachment 59949
Reckoning £100 all in (£20 for the tube and £40 apeice for the shells)?
next are a bunch of Cyma 140-round ak midcaps, fielded a couple of times but i preferr the straighter 5.45 type:
View attachment 59956
£20 for the lot?
And finally we have this heretical beast:
View attachment 59926
She started out life as an AGM mg42, but the split gearbox design made reliability atrocious as an aeg and the receiver was pretty weak (dropped it and she bent). She’s been straightened up and has had a pair of 10mm steel bars mounted inside the receiver to re-enforce it, possibly one of the rare guns where “gun hits don’t count” might have some actual validity. the bipod snapped at the pivot point and has been bolted back together as solid as can be done.
She’s running a polarstar jack with a modded sr25 nozzle. To get her cycling well at 1j the inner barrel is much shorter than the original, but I’ll include the original (all 650mm of it). Fps is of course adjustable and for added hilarity she can also be switched to semi-only operation if you want the worlds worst cqb gun. The right hand half of the fcu screen doesn’t display numbers but the programming works just fine (you just can’t tell what the actual number is).
Currently she’s setup for firing .2’s at ~1200rpm (to match the original rof) I’ve no idea how fast the box feeds but she should be capable of faster.
The original magazine mech was pretty godawful and blew up immediately, much of her life has been spent gathering dust while I figured out how to get something decent on there. Currently it’s a classic army M249 box mag, this is entirely external (it’s a hicap that cuts off when it’s wound up) so it’s entirely feasible to do actual mag changes if you had another box and the box adaptor is removable if you want to revert to classic configuration.
Comes with original gurttrommel shell, the plan was to try and 3-d print an adaptor to put the 249 box mech inside it (there is space). Also comes with a polarstar mini fcu and m4 jack nozzle (modded for low-flow but can be reverted to default, it’s just some glue plugging the ports). The sling is a pkm sling.
Not the worlds most accurate gun and it’s a pain to carry, but it makes one hell of an impression.
View attachment 59927View attachment 59928View attachment 59929View attachment 59931View attachment 59932View attachment 59933View attachment 59934View attachment 59935View attachment 59936View attachment 59937View attachment 59938
Reckoning around the £500 mark?
Any tips on how to the hell you post a package that big would be appreciated, it’s a lot of gun and not light….
View attachment 59930
View attachment 59942
View attachment 59945
View attachment 59950
View attachment 59951
First up is a boneyard vsr clone, cost me £20 for the bare gun deactivated and with a few hand-me down parts she’s just about functional but not any better than a stock gun, maybe a good base if someone wants a shell to start off a build. Mainly got it to try out bolt guns and it’s just not my style.
Shooting ~0.8j, consistency is ok just a weak spring for our 1j limit.
View attachment 59944View attachment 59946
Reckoning maybe £40 scope included?
Next is an even more boneyard cybergun (kwc?) 1911, no mags and don’t let the externals fool you she’s pretty much dead inside, especially the trigger mech. Pretty much only good for parts, or if someone wants a pre-weathered a1 style body
No idea what she’s shooting, hasn’t been functional in a long time. No mags.
View attachment 59955View attachment 59954
£20 tops methinks?
Now we have a lockdown boredom project m4, built off an old king arms receiver, has an e&c qd gearbox and a hodge podge of internals, good compression although reckon the hop-nozzle seal isn’t quite right as she’s about 0.6j. she’s wired for a GATE mosfet, currently has a nanohard fitted but a warfet would be a straight swap. only cutoff lever I had that fit had been modded for an internal mosfet so she’s locked to semi. The red dot has a crack in the lens but is still functional.
Again, another parts/project gun.
View attachment 59939View attachment 59940View attachment 59941View attachment 59943
Maybe £75?
Finally we have a VLTOR front rail, pretty weathered but very much a solid piece of fore-end. Comes with the flip up sight and whatever bolt-on rail sections I can find. Was always too heavy for my liking:
View attachment 59957View attachment 59958View attachment 59959
No idea what these are worth, whether it’s legit or a clone, so any advice welcome.
First up is a “battle worn” tm hicapa, perfectly functional with 2 leak free mags. Mods wise she’s just running a pdi 6.01 inner barrel and home-brew tritium night sights (they’re not very bright but readable in darkness). Nothing wrong with her shooting wise, I just prefer running a makarov. Was keeping her as a night gun but I doubt I’m going to be doing many night shoots these days:
View attachment 59952View attachment 59953
Reckoning £75 all in?
Next is a 40mm launcher of unknown provenance, bit rattly and the safety has been removed to get enough movement to fire a 40-mike properly, otherwise perfectly functional if not pretty. Comes with a pair of 40-mikes that have seen some use but pretty good nick and work just fine. I just don’t get close enough to justify the extra weight of a tube….
View attachment 59947View attachment 59948View attachment 59949
Reckoning £100 all in (£20 for the tube and £40 apeice for the shells)?
next are a bunch of Cyma 140-round ak midcaps, fielded a couple of times but i preferr the straighter 5.45 type:
View attachment 59956
£20 for the lot?
And finally we have this heretical beast:
View attachment 59926
She started out life as an AGM mg42, but the split gearbox design made reliability atrocious as an aeg and the receiver was pretty weak (dropped it and she bent). She’s been straightened up and has had a pair of 10mm steel bars mounted inside the receiver to re-enforce it, possibly one of the rare guns where “gun hits don’t count” might have some actual validity. the bipod snapped at the pivot point and has been bolted back together as solid as can be done.
She’s running a polarstar jack with a modded sr25 nozzle. To get her cycling well at 1j the inner barrel is much shorter than the original, but I’ll include the original (all 650mm of it). Fps is of course adjustable and for added hilarity she can also be switched to semi-only operation if you want the worlds worst cqb gun. The right hand half of the fcu screen doesn’t display numbers but the programming works just fine (you just can’t tell what the actual number is).
Currently she’s setup for firing .2’s at ~1200rpm (to match the original rof) I’ve no idea how fast the box feeds but she should be capable of faster.
The original magazine mech was pretty godawful and blew up immediately, much of her life has been spent gathering dust while I figured out how to get something decent on there. Currently it’s a classic army M249 box mag, this is entirely external (it’s a hicap that cuts off when it’s wound up) so it’s entirely feasible to do actual mag changes if you had another box and the box adaptor is removable if you want to revert to classic configuration.
Comes with original gurttrommel shell, the plan was to try and 3-d print an adaptor to put the 249 box mech inside it (there is space). Also comes with a polarstar mini fcu and m4 jack nozzle (modded for low-flow but can be reverted to default, it’s just some glue plugging the ports). The sling is a pkm sling.
Not the worlds most accurate gun and it’s a pain to carry, but it makes one hell of an impression.
View attachment 59927View attachment 59928View attachment 59929View attachment 59931View attachment 59932View attachment 59933View attachment 59934View attachment 59935View attachment 59936View attachment 59937View attachment 59938
Reckoning around the £500 mark?
Any tips on how to the hell you post a package that big would be appreciated, it’s a lot of gun and not light….
View attachment 59930
View attachment 59942
View attachment 59945
View attachment 59950
View attachment 59951
Last edited by a moderator:
