Gun picture thread

[SSPKali]

TM M733, Vortex red dot, TacBelts minimalist sling, Scout light clone on genuine Magpul mount (butchered by me) and an E&C non-clone correct grip (fight me!)

Internally it has 16:1 gears short stroked 4 teeth (2 pickup / 2 release) shimmed and Warhead HS motor. XT M110 spring is giving 275fps (+/-1fps, ~1J) on Warhead 0.28g BBs and a grouping of 30mm at 10m from a clamped position. ML Macaron 50deg and hard nub do the hard work there!

Response and rate of fire on a 7.4v 20c LiPo is excellent without getting into w*nker gun territory and resorting to MOSFETs and such.

I am after a rubber stock pad (the shorter type, all ones I have found are 30% longer than the butt plate!) and maybe an E&C metal receiver as the handle on the TM polymer one cracked and is held together with glue....not the most stable optic mounting!

View attachment 103444

 

[Davegolf]

It was only fitting to put a flag up ?‍

View attachment 103443

Noice!

What are they all internally?

 

[Shamal]

It was only fitting to put a flag up ?‍

View attachment 103443

You get too much fuckin' pocket money!! ???

 

[Davegolf]

Flags aren’t that expensive 

 

[Jez_Armstrong]

Noice!

What are they all internally?

L119A2 is a GHK so all steel internals 

L119A1 is an aeg with a Perun V2 hybrid and a Warhead motor 

G&G SR15 is standard apart from a Warhead motor 

Bottom two are standard 

You get too much fuckin' pocket money!! ???

I'm blessed with a good job and no kids ?

 

[Dan Robinson]

blessed with a good job and no kids

On the other hand.... Having a child gives you someone to clean your pews:

View attachment 103529

 

[Jez_Armstrong]

Yeah but that costs more in the long run ?

 

[C-Diddy]

On the other hand.... Having a child gives you someone to clean your pews:

View attachment 103529

Is the Lanson used for cleaning or lubrication? 

 

[Dan Robinson]

Is the Lanson used for cleaning or lubrication? 

Was a present from a customer for SWMBO  by way of an apology for me having to work late on the eve of her 50th.

Trouble is she's T total ?

 

[alxndrhll]

Bit of a tinker to get the selector plate to play ball, and lower the power but I got there in the end. Entirely shagged paintjob as is customary for me at this point, absolutely smitten by this lump. Have different red dot mount en route because I'm not a fan of the standard Vortex lower 1/3rd but it's entirely functional for now.

View attachment 103613

 

[TobiasC95]

But it really ties the room together.

You lot are very unsophisticated. Can't believe you can't pick up on the subtle nuances between a Rug and a "Throw".....

And thanks' for your help, I have since moved on the PEW.

 

[Lozart]

Is the Lanson used for cleaning or lubrication? 

Cleaning. Everyone knows you need Bollinger for lubrication.

 

[Davegolf]

Bit of a tinker to get the selector plate to play ball, and lower the power but I got there in the end. Entirely shagged paintjob as is customary for me at this point, absolutely smitten by this lump. Have different red dot mount en route because I'm not a fan of the standard Vortex lower 1/3rd but it's entirely functional for now.

View attachment 103613

Whats the big silencer down the side of the cabinet for!?

 

[alxndrhll]

Whats the big silencer down the side of the cabinet for!?

?

That would be a barbell and a foam mat.

 

[MandalShArK]

Just a Simple WE based Block 1 put together for my RAN Clearance Diver kit.

View attachment 103698

 

[mightyjebus]

long time project AEG. CYMA 0.28 Type 3 AK47. This is the recoil model similar to the TM NGRS AK's. externally it has some Inokatsu laminated furniture worn naturally and the magazine is a RS slab slided early AK mag modified for a midcap internals. Internally it is running a Leviathion V3 and ZCI 400mm inner barrel and Maple Leaf Mr Hop (50).

View attachment 103715

 

[Skara]

W  ? - Carbon Fibre edition

 

[Davegolf]

That actually looks quite pretty, is it an actual W anchor gun? Whats inside?

Is the paracord structural?

 

[Impulse]

So, thanks to @Whats my first MWS build is basically done. It's a "close enough" build for a mk12 mod1 SPR (it's just an m16a4 with a scope and a bipod but ssssshhhhhhhh)

I do also have a carry handle and will look out for an m16a1 front so that I can do a quick conversion to an m16a1 for 'Namsoft. I do love me some captured weapons  

View attachment 103736

View attachment 103737

Now I just need a 2nd MWS to build as a little CQB tacticool thing...

 

[Lozart]

 It's a "close enough" build for a mk12 mod1 SPR 

View attachment 103738