Gun picture thread

TM M733, Vortex red dot, TacBelts minimalist sling, Scout light clone on genuine Magpul mount (butchered by me) and an E&C non-clone correct grip (fight me!)

Internally it has 16:1 gears short stroked 4 teeth (2 pickup / 2 release) shimmed and Warhead HS motor. XT M110 spring is giving 275fps (+/-1fps, ~1J) on Warhead 0.28g BBs and a grouping of 30mm at 10m from a clamped position. ML Macaron 50deg and hard nub do the hard work there!

Response and rate of fire on a 7.4v 20c LiPo is excellent without getting into w*nker gun territory and resorting to MOSFETs and such.

I am after a rubber stock pad (the shorter type, all ones I have found are 30% longer than the butt plate!) and maybe an E&C metal receiver as the handle on the TM polymer one cracked and is held together with glue....not the most stable optic mounting!

View attachment 103444

 
Bit of a tinker to get the selector plate to play ball, and lower the power but I got there in the end. Entirely shagged paintjob as is customary for me at this point, absolutely smitten by this lump. Have different red dot mount en route because I'm not a fan of the standard Vortex lower 1/3rd but it's entirely functional for now.

View attachment 103613

 
alxndrhll said:
Bit of a tinker to get the selector plate to play ball, and lower the power but I got there in the end. Entirely shagged paintjob as is customary for me at this point, absolutely smitten by this lump. Have different red dot mount en route because I'm not a fan of the standard Vortex lower 1/3rd but it's entirely functional for now.

View attachment 103613
Click to expand...
Click to shrink...


Whats the big silencer down the side of the cabinet for!?

 
long time project AEG. CYMA 0.28 Type 3 AK47. This is the recoil model similar to the TM NGRS AK's. externally it has some Inokatsu laminated furniture worn naturally and the magazine is a RS slab slided early AK mag modified for a midcap internals. Internally it is running a Leviathion V3 and ZCI 400mm inner barrel and Maple Leaf Mr Hop (50).

View attachment 103715

 
W ⚓ ? - Carbon Fibre edition

NQm6T71.jpg


yZzoZ5A.jpg


 
That actually looks quite pretty, is it an actual W anchor gun? Whats inside?

Is the paracord structural?

 
So, thanks to @Whats my first MWS build is basically done. It's a "close enough" build for a mk12 mod1 SPR (it's just an m16a4 with a scope and a bipod but ssssshhhhhhhh)

I do also have a carry handle and will look out for an m16a1 front so that I can do a quick conversion to an m16a1 for 'Namsoft. I do love me some captured weapons :D  

View attachment 103736

View attachment 103737

Now I just need a 2nd MWS to build as a little CQB tacticool thing...

 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

C
The 'What have you just bought' Thread
908 909 910
Replies
18K
Views
2M
Rickwales
Rickwales
Back
Top