• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Gun picture thread

I finished fully upgrading my Snow Wolf M41A Pulse Rifle (v6 gearbox) including barrel/hopup, (literally almost everything internal replaced or upgraded):

After about 8 months since purchasing it and spending most of that time fiddling with it and upgrading / trying to get it to fire straight, it finally is finished and works perfectly.

I present the most powerful M41A in the UK:

kXpzR39.jpg


https://imgur.com/a/1f74kOC

Parts:

M41A Upgrades / Mods
- (M41A) Maple Leaf Hop Up Tensioner (Omega Nub)                        - £6.00
- (M41A) Maple Leaf Macaron Hop Rubber Bucking 60 Degrees (AEG)            - £7.50
- (M41A) ASG INFINITY CNC Motor U-30000 (Short)                            - £54.99
- (M41A) Aluminium piston head with the bearing [Shooter]                - £6.79
- (M41A) Light Reinforced Piston Metal Teeth [SHS]                        - £8.67
- (M41A) Laylax (Prometheus) - Air Nozzle                                - £15.78
- (M41A) SLD 13:1 Gears (CNC Bevel Version)                                - £18.50
- (M41A) Lonex Aluminium Cylinder Head for Version 6                    - £11.00
- (M41A) Prometheus EG Spring Guide Tornado Shaft (Version 6 & 7)        - £19.00
- (M41A) PDI AEG 100% (M95) Silicon Chrome Steel Spring Variable Pitch    - £18.52
- (M41A) Guarder Steel Bushing for Version 6 Gearbox (P90/Thompson)        - £13.50
- (M41A) STAINLESS CYLINDER WITH HOLE 3/4 (Shooter)                        - £16.93
- (M41A) Madbull 6.03 Tightbore Barrel 300mm Black Python II            - £42.59

 
Last edited by a moderator:
paradoxum said:
I finished fully upgrading my Snow Wolf M41A Pulse Rifle (v6 gearbox) including barrel/hopup, (literally almost everything internal replaced or upgraded):

After about 8 months since purchasing it and spending most of that time fiddling with it and upgrading / trying to get it to fire straight, it finally is finished and works perfectly.

I present the most powerful M41A in the UK:



https://imgur.com/a/1f74kOC

Parts:

M41A Upgrades / Mods
- (M41A) Maple Leaf Hop Up Tensioner (Omega Nub)                        - £6.00
- (M41A) Maple Leaf Macaron Hop Rubber Bucking 60 Degrees (AEG)            - £7.50
- (M41A) ASG INFINITY CNC Motor U-30000 (Short)                            - £54.99
- (M41A) Aluminium piston head with the bearing [Shooter]                - £6.79
- (M41A) Light Reinforced Piston Metal Teeth [SHS]                        - £8.67
- (M41A) Laylax (Prometheus) - Air Nozzle                                - £15.78
- (M41A) SLD 13:1 Gears (CNC Bevel Version)                                - £18.50
- (M41A) Lonex Aluminium Cylinder Head for Version 6                    - £11.00
- (M41A) Prometheus EG Spring Guide Tornado Shaft (Version 6 & 7)        - £19.00
- (M41A) PDI AEG 100% (M95) Silicon Chrome Steel Spring Variable Pitch    - £18.52
- (M41A) Guarder Steel Bushing for Version 6 Gearbox (P90/Thompson)        - £13.50
- (M41A) STAINLESS CYLINDER WITH HOLE 3/4 (Shooter)                        - £16.93
- (M41A) Madbull 6.03 Tightbore Barrel 300mm Black Python II            - £42.59
Click to expand...
That is amazing piece of work and what ever makes you happy but by god that is blasphemy. I just noticed the company logo i just threw up in my mouth a bit.

 
Last edited by a moderator:
Yep, internally, good job, but gotta agree externally it's hideous, why have such an iconic & rare design & then spoil it with attachments & tape.

literally sometimes less is more ?

 
Tackle said:
Yep, internally, good job, but gotta agree externally it's hideous, why have such an iconic & rare design & then spoil it with attachments & tape.

literally sometimes less is more ?
Click to expand...


Thanks  :)  Honestly I will probably take the rail stuff off when I actually play because it's just dead weight, and the shotgun strap with shells is for my M870 that I have mounted on my back, but I've literally never even pulled it out, it's mostly just for aesthetics and the "I like to keep this handy *cocks*, for close encounters" line, so I'll probably end up taking that off too.

I have weathered it quite a bit to try and make it look more screen-accurate which I think turned out really nice, and the grip tape on the stock helps with shoulder comfort and just gripping the ..grip.

You guys haven't even seen pics of when I bolted a long 20slot rail to the top and slapped an eotech replica on top of it. the gap between the 'handle' is enough to aim with so I ditched that idea almost immediately.

 
Last edited by a moderator:
People are kidding themselves if they think those sort of modifications wouldn't be done in the field by colonial marines (albeit with different equipment, maybe), looks great and if it helps you out IRL, even better ?

 
DrAlexanderTobacco said:
People are kidding themselves if they think those sort of modifications wouldn't be done in the field by colonial marines (albeit with different equipment, maybe), looks great and if it helps you out IRL, even better ?
Click to expand...


Hell dude Ripley herself duct-tapes a godamn flame unit to her pulse rifle at the end of the movie.

 
DrAlexanderTobacco said:
People are kidding themselves if they think those sort of modifications wouldn't be done in the field by colonial marines (albeit with different equipment, maybe), looks great and if it helps you out IRL, even better ?
Click to expand...
we have shoulder lamps to blind ourselves and who needs targeting lasers. thats what smart guns are for

 
Finally finished my Daewoo K2. I went the opposite route of @mightyjebus and @HuttArmouries and HPA'd mine - only because I dont have the money nor care to build up a good AEG gearbox right now and I do have a spare Polarstar Fusion Engine lying around. I added a real steel Stormwerkz K2 rail because I hate iron sights, a Vortex Sparc2 on a Rogers Riser, a Rogers Rail Light since there was still some room on the rail, and a Phantom flash hider, simply because thats the closest one I could find to what the K2s in service have on them. I was forced to use the less than ideal but still OK hop unit from the K2 as it is too tight for my spare Maxx, ProWin, or really any standard AR hop unit, but its got my spare barrel, bucking, and flat hop from my SR-25 so it should have some good range.

View attachment 56353View attachment 56354

 
That looks good. The K2 always reminds me of a cross between an AR10, a M16 and a FNC. I'm tempted to build a K2 as well and I see that you can get a metal upper and lower receiver for the K".

 
mightyjebus said:
That looks good. The K2 always reminds me of a cross between an AR10, a M16 and a FNC. I'm tempted to build a K2 as well and I see that you can get a metal upper and lower receiver for the K".
Click to expand...


Oooooo, where? Im almost afraid to field mine in fear of falling on my a** like usual and breaking it...

 
TcxHMTw.jpg


Specna Arms H20. Settled on the aesthetics now.

It's... Taken some "breaking in" shall we say. A few teething problems out of the box, but it's all sorted now, thanks to a Gate USB link and an armorers wrench ?

I've decided I fucking hate the CTR Stock though. Looks lovely, but getting it off and on and needing Allen keys to get to the battery. Get off.

EPS supremacy! :)

... anyone want to buy a cheap CTR?

 
You must log in or register to reply here.

Similar threads

andersson
G&G L85a2 upper receiver jumps out of alignment
Replies
1
Views
241
ButcherBill
ButcherBill
S
VFC BCM MCMR GBBR and VFC PRO FORCE Sig MCX
Replies
0
Views
493
StayOnTarget
S
Zarrin
Asian retailer Checkout w/ over 50% of RIF externals
Replies
5
Views
1K
Bnjemann
Bnjemann
Dogsbody100
Upgrading a Well MB 01
Replies
3
Views
646
Rogerborg
Rogerborg
sam_91
Hey All , new to this forums but not new to Airsoft
Replies
1
Views
928
ButcherBill
ButcherBill
Back
Top