Gun picture thread

Neither a full gun nor a picture. But something you'll probably never thought about or wished to see. A JLS RX4 Outer barrel getting some weight reduction on a lathe today. 

The JLS Outer Barrel is surprisingly made of very solid steel, as such, it is very front heavy. A buddy of mine has access to a lathe at work and shaved a few mm to cut it's weight down by a quarter. 

Annoyingly it is only Steel on the part of the outer barrel inside the receiver. Once it is external to the receiver they decided to epoxy a Zamac outer barrel extension to it (Which has oxidised due to age). Whyyyy?


View attachment 85932

 
Last edited by a moderator:
Druid799 said:
View attachment 85937
Click to expand...
Click to shrink...
Aye. Bought the last brand new one known in the world a couple of years ago from a shop in Denmark, 90 quid! I've never used it, but being NOS for well over a decade it was not in the best of shape internally when I received it. Haven't used it in anger; It's currently in bits and will hopefully be reassembled tonight with new air seal, gearset and motor parts. Ready for its first skirmish this weekend!

 
Last edited by a moderator:
Prolish said:
Thought I'd drop my Shughart M14 build on here. If anyone has a spare G&G stock going that has textured areas around the pistol grip and in front of the magazine well, i'd be keen to get it as the real stock I have turned out to be entirely too much faff to work into it. 

View attachment 86019
Click to expand...
Click to shrink...


Nice! Where did you source the Aimpoint and LAM?

 
My gun rack. Not all r there. I have 2 others share with bf witch is a shoty anf baby cappa.

From top to bottom

New not skirmished yet star csi x5

Black and gray only fpr milsim.

Pink high cappa shelby 

g and g ff16 carbine

been upgraded had since late 2011 used since. Seen alot of wars 

unknown pistol c02 covered in black dimontys.

there superglued on aint comeing off

Tm Star thunder maul (ghost in the shell gun) in black and silver new never skirmished.

For cqb 

It is the Japanese version not usa version.. all different is no orange tip the stamp on side is different

also have full lengh clear riot sheld.

And pink bfg.

View attachment 86282

 
Last edited by a moderator:
My 'Close enough if you squint and turn your head a little from a distance' TM MWS based l119a1

TM MWS base
Unknown brand CAR-15 stock from Ebay secondhand.
Guarder Buttpad.
Airsoft Artisan Flash hider and suppressor.
Begadi DIS
Spare barrel and frontsight chopped by Jim at LCs Engineering outpost. Have kept the originals should I ever wish to change it all back.
USGI 'silent sling'

Also a big thanks to AlphaBear for talking me out of selling this last year! :)

 

View attachment 86380

View attachment 86381

View attachment 86382

View attachment 86383

 
I do like a traditional styled M4 with carry handle and a handguard with covers on rather than exposed rails everywhere.

@PinkGunloving that collection. I want to do a gun wall but Mrs Eezer won't allow it. Bad for the Feng Shui, or gives the wrong impression to the neighbours, or she doesn't want the house resembling a Ukranian defence bunker, or some keech like that. Might do it in the garage then...

 
AirsoftTed said:
My 'Close enough if you squint and turn your head a little from a distance' TM MWS based l119a1

TM MWS base
Unknown brand CAR-15 stock from Ebay secondhand.
Guarder Buttpad.
Airsoft Artisan Flash hider and suppressor.
Begadi DIS
Spare barrel and frontsight chopped by Jim at LCs Engineering outpost. Have kept the originals should I ever wish to change it all back.
USGI 'silent sling'

Also a big thanks to AlphaBear for talking me out of selling this last year! :)

 

View attachment 86380

View attachment 86381

View attachment 86382

View attachment 86383
Click to expand...
Click to shrink...
I know my MWS is gucci'd up but I do love the classic look. My WE M4 basically looked like that the 2 or so years I used it

 
Any 1911 fans out there? Here's the latest build that I tried. It won't be replacing my glock for skirmishes anytime soon, but a cool build nonetheless..

Did you know people do bowling with 1911's? Apparently it's called "pin shooting" and there are specific styles of 1911's catered to that. Here's the post that inspired this build -> https://www.thearmorylife.com/bowling-with-a-pistol-a-guide-to-pin-shooting/

Wanted to get a short compensator like the real-steel examples in the article, but couldn't find any similar so I went with a 45" muzzle chamfer instead. With the looser tolerances of airsoft it doesn't look as blended to the bushing as RS, but I think I like it. I had to learn the hard way that stainless takes a lot longer than you think to grind out using hand tools...?

View attachment 86561

In certain angles it makes the bore of the outer barrel look bigger than it actually is

View attachment 86564

View attachment 86565

some real-steel examples that I referenced:View attachment 86567View attachment 86566

 
Last edited by a moderator:
frontsight said:
Any 1911 fans out there? Here's the latest build that I tried. It won't be replacing my glock for skirmishes anytime soon, but a cool build nonetheless..

Did you know people do bowling with 1911's? Apparently it's called "pin shooting" and there are specific styles of 1911's catered to that. Here's the post that inspired this build -> https://www.thearmorylife.com/bowling-with-a-pistol-a-guide-to-pin-shooting/

Wanted to get a short compensator like the real-steel examples in the article, but couldn't find any similar so I went with a 45" muzzle chamfer instead. With the looser tolerances of airsoft it doesn't look as blended to the bushing as RS, but I think I like it. I had to learn the hard way that stainless takes a lot longer than you think to grind out using hand tools...?

View attachment 86561

In certain angles it makes the bore of the outer barrel look bigger than it actually is

View attachment 86564

View attachment 86565

some real-steel examples that I referenced:View attachment 86567View attachment 86566
Click to expand...
Click to shrink...
I loved my kwc 1911 but it's too heavy to be a sidearm really

View attachment 86579

 
PopRocket123 said:
I loved my kwc 1911 but it's too heavy to be a sidearm really
Click to expand...
Click to shrink...
Nice to see people actually using them in skrimishes! I might get some extra mags and try it out as well..

tbh I wish companies made aftermarket steel inner frames for the 1911 like they do for marui glocks; even with the aluminum kit and stainless parts it's ~.8 kg

 
frontsight said:
Any 1911 fans out there? Here's the latest build that I tried. It won't be replacing my glock for skirmishes anytime soon, but a cool build nonetheless..

Did you know people do bowling with 1911's? Apparently it's called "pin shooting" and there are specific styles of 1911's catered to that. Here's the post that inspired this build -> https://www.thearmorylife.com/bowling-with-a-pistol-a-guide-to-pin-shooting/

Wanted to get a short compensator like the real-steel examples in the article, but couldn't find any similar so I went with a 45" muzzle chamfer instead. With the looser tolerances of airsoft it doesn't look as blended to the bushing as RS, but I think I like it. I had to learn the hard way that stainless takes a lot longer than you think to grind out using hand tools...?

View attachment 86561

In certain angles it makes the bore of the outer barrel look bigger than it actually is

View attachment 86564

View attachment 86565

some real-steel examples that I referenced:View attachment 86567View attachment 86566
Click to expand...
Click to shrink...
Very nice.

Could I ask what the base gun was?

And who makes the Springfield Armory slide?

 
emilianoksa said:
Very nice.

Could I ask what the base gun was?

And who makes the Springfield Armory slide?
Click to expand...
Click to shrink...
Thanks! 

The base gun was a TM MEU. I used the frame of a springfield MEU kit from Guarder, and the slide is a hi capa 5.1 slide also from Guarder.

I wanted to have the adjustable hi capa sights on a 1911 frame, along with rear-only slide serrations like a SA range officer.

Rest of the parts are a mix of AM, Guarder, and Nova

View attachment 86586

 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

C
The 'What have you just bought' Thread
908 909 910
Replies
18K
Views
2M
harleyd
H
Back
Top