• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Gun picture thread

Cyma CM045 "Krinkov"

Arrived yesterday and I spent today stripping, cleaning and shimming the gearbox (great quality, still with gunky blue grease!) and re-wiring with a 11.1v Li-Ion and Gate NanoHard mosfet :) Madbull tightbore barrel I had lying around and G&G green rubber / Firefly nub. New O-ring nozzle from AK2M4 arriving tomorrow but not sure I can be arsed to strip it down again ?

Outside has been sanded and roughed up, wood sanded and stained. Still more to do on this (and the 5 steel mags!) to give it the true Khyber Pass look.

335fps +/- 4fps and 20rps on full auto ? Destined for OPFOR MILSIMS, loaner gun and noisy CQB!

View attachment 59154

 
Gun back from Luke @ Negative Airsoft  (G&G Tr4-18)

New cylinder

New shell (Was cracked)

New gears & shimmed (Replacement gears were already worn)

New rotary hop unit (Still got my prommie flathop in it)

+ few other bits & bobs he's done to get it running sweet again.  Basically it's a new gun. :)

Looking forward to playing with it this Saturday. (Mainly my CQB gun, but still wanna run it outside)

View attachment 59155

 
Davegolf said:
@SSPKali would be a complete splurge but ive always lusted for a noisy CQB AK...

https://www.evike.com/products/39816/

In my eyes i "should" have enough CQB guns, what with pistol, mp5 and now shotgun, but you always need a backup... for the backup right?
Click to expand...


Do it.

The aksu is a great wee gun.

However you will need a backup for the backup of the backup so i suggest grabbing an aeg variant as well as a gbb for the colder weather and a makarov just in case you get jumped mid reload.

 
Davegolf said:
@SSPKali would be a complete splurge but ive always lusted for a noisy CQB AK...

https://www.evike.com/products/39816/

In my eyes i "should" have enough CQB guns, what with pistol, mp5 and now shotgun, but you always need a backup... for the backup right?
Click to expand...
If you want noisy CQB I would recommend a TM MP7 GBB with a SoundHog on it....sounds like a 22 rimfire when I tested in the garden, will be even louder inside ?

 
SSPKali said:
If you want noisy CQB I would recommend a TM MP7 GBB with a SoundHog on it....sounds like a 22 rimfire when I tested in the garden, will be even louder inside ?
Click to expand...


Yes i agrree it probably is, i had one a few years back and in the woods it was loud, so soundhog indoors would be nuts!

 
Well, while I wait for my outer barrel order from VFC to arrive so I can finally complete my 417a2 project (its been 4 months...), Ive been working on various other projects. About a month ago I got a great offer on a Krytac LMG upper, R-hopped barrel setup, and two box mags for about 160 quid. Well, I tried it on several of my various ARs I have lying around including a VFC M27, KWA SR-10, KWA SR-7, VFC KA PDW, CA AR-15, and a few more, yet it wouldn't fir on any. However, it would fit on my backup gun. See, I have this one gun that goes to every game with me, no matter if I am using a SMG, LMG, sniper, etc. I built it as my first high end AEG about 5 years ago at a teching class run by a shop im rather close friends with. Its a VFC Jag Arms PHX-15 SBR. The thing is a tank, holding around 300 FPS and 26RPS with an 11.1. I always bring it as something fancy always breaks, and after a MilSim two years ago where I had three of the 5 guns I brought go down I always bring the gun I affectionately call "Backup". Well, Backup's lower happened to fit the Krytac LMG upper. Backup is black with tan highlights, stock, grips, etc. Well, after installing the LMG upper I was not a fan of the Rogers SuperStock I had on it. It just seemed too small. So I got a PTS MOE Rifle AEG stock that would fit my brick LiPos, since an LMG should always have a bigger battery. Well, that turned out to not be great, as the stock took about 5 hours of modification to actually fit the gun. However, it now looks great and is solid. I also added a Vortex Crossfire T1 and an Eotech G33 magnifier on top (I may end up using an ELCAN like most of my other LMGs), and a Magpul AFG2 (may switch it to tan to match the look Backup's AR form has) and Harris-style bipod. Now, with about 10 minutes at home/20min on the field I can switch between Backup's AR and LMG forms.

View attachment 59189View attachment 59190View attachment 59191

 
Last edited by a moderator:
L3wisD said:
Got bored. Had Paint Pens ?









Makes the gun looks much nicer I reckon.

I think I'll leave the trades on the slide alone, what do we reckon?
Click to expand...
on the rs picture references the serial number and proof marks are hi-lited but not bright white.

I know I posted this before but I was playing with it today and its just so pretty.

View attachment 59219

View attachment 59220

 
Yesterday I mocked up roughly how a want my SCAR H to look. The final version of the rail is currently being printed. I need to print a stock adapter as the one I want is discontinued, a replacement gas plug as that was missing and maybe a new charging handle. Then I'm getting a stock and folding stock adapter, new scope mount, fluted outer barrel, 2 port long muzzle brake (if I can find one in stock anywhere) and CYMA SR-25 P-Mags modified to fit the SCAR and hopefully some 7.62 ranger plates. After that it's on to internals. It's getting a full rebuild including a MAXX hopup and being modified to fit a V2.5 gearbox

View attachment 59255

View attachment 59254

 
L3wisD said:
Just realised we never talked business about this.

Still interested? ?
Click to expand...


Haha, sure. But itll have to wait until at least after the 26th; just spent the remainder of last month's paycheck on a like new KWA Vector haha.

 
You must log in or register to reply here.

Similar threads

andersson
G&G L85a2 upper receiver jumps out of alignment
Replies
1
Views
240
ButcherBill
ButcherBill
S
VFC BCM MCMR GBBR and VFC PRO FORCE Sig MCX
Replies
0
Views
492
StayOnTarget
S
Zarrin
Asian retailer Checkout w/ over 50% of RIF externals
Replies
5
Views
1K
Bnjemann
Bnjemann
Dogsbody100
Upgrading a Well MB 01
Replies
3
Views
646
Rogerborg
Rogerborg
sam_91
Hey All , new to this forums but not new to Airsoft
Replies
1
Views
927
ButcherBill
ButcherBill
Back
Top