proffrink

New price as scope and DBLA to be sold separately.
 
PDIK - dare I say it - DMR. Locked to semi auto and uses a pneumatic HPA kit (PDiK) so needs no battery. Internally regulated and has a 13ci/3000psi bottle in the Mancraft MASS stock. Has all the responsiveness of HPA but doesn't have an external line getting in your way if you're laying down a lot to snipe. Cerakoted in half graphite, half burned bronze mix.
 
Not used a whole lot in skirmishing as sniping isn't for me
 
Internals
Mancraft PDIK engine Wolverine Storm v2 regulator  
PDI 6.01 barrel ProWin hop unit Flat hopped  
Externals
Licensed SA receiver set from G&P Mancraft MASS air stock Cerakoted by Hi-Spec Coatings G&P MOTS wirecutter rail G&P rifle length outer barrel 5KU ambidextrous selector (does not work ambidextrously due to the way the PDIK works - one side of the selector is just for show, in short) 5KU ambidextrous mag release (this does work) Clone Harris style bipod  
Extras
6x no-name MOE-style midcap 70rd magazines with genuine Magpuls and Mapleleaf enhanced springs for reliable feeding Visionking 3-9x42 with clone Larue quick release mount (mount modified a bit underneath to stop wobble) SOLD G&P DBAL v1 (has the IR modes etc. working that you'd expect) Split into another listing Nuprol carry case with custom foam (pick and pluck but then sealed over with sprayable vinyl for longevity)  
Delivery & Payment
If you really want to 'gift' your PayPal payment based off my previous feedback I will knock off half of whatever the fees are I will accept a return of this in un-skirmished condition within 30 days with no questions asked. I will also pay half of your return postage fees Delivery will be by Parcelforce 48 and I can dispatch within 3 working days of payment (probably sooner but can't be sure).  
I'm not really after swaps unless it's a pistol + cash my way.
 
The regulator can be tournament locked, but it's little fiddly to do (not that you'd want to often).
 
My availability during the days and evenings is very limited so viewing it in person will be difficult. This is why I offer a 30 day returns period and will pay half of the return postage if you change your mind.
 

New price as scope and DBLA to be sold separately.
 
PDIK - dare I say it - DMR. Locked to semi auto and uses a pneumatic HPA kit (PDiK) so needs no battery. Internally regulated and has a 13ci/3000psi bottle in the Mancraft MASS stock. Has all the responsiveness of HPA but doesn't have an external line getting in your way if you're laying down a lot to snipe. Cerakoted in half graphite, half burned bronze mix.
 
Not used a whole lot in skirmishing as sniping isn't for me
 
Internals
Mancraft PDIK engine Wolverine Storm v2 regulator  
PDI 6.01 barrel ProWin hop unit Flat hopped  
Externals
Licensed SA receiver set from G&P Mancraft MASS air stock Cerakoted by Hi-Spec Coatings G&P MOTS wirecutter rail G&P rifle length outer barrel 5KU ambidextrous selector (does not work ambidextrously due to the way the PDIK works - one side of the selector is just for show, in short) 5KU ambidextrous mag release (this does work) Clone Harris style bipod  
Extras
6x no-name MOE-style midcap 70rd magazines with genuine Magpuls and Mapleleaf enhanced springs for reliable feeding Visionking 3-9x42 with clone Larue quick release mount (mount modified a bit underneath to stop wobble) SOLD G&P DBAL v1 (has the IR modes etc. working that you'd expect) Split into another listing Nuprol carry case with custom foam (pick and pluck but then sealed over with sprayable vinyl for longevity)  
Delivery & Payment
If you really want to 'gift' your PayPal payment based off my previous feedback I will knock off half of whatever the fees are I will accept a return of this in un-skirmished condition within 30 days with no questions asked. I will also pay half of your return postage fees Delivery will be by Parcelforce 48 and I can dispatch within 3 working days of payment (probably sooner but can't be sure).  
I'm not really after swaps unless it's a pistol + cash my way.
 
The regulator can be tournament locked, but it's little fiddly to do (not that you'd want to often).
 
My availability during the days and evenings is very limited so viewing it in person will be difficult. This is why I offer a 30 day returns period and will pay half of the return postage if you change your mind.
 

New price as scope and DBLA to be sold separately.
 
PDIK - dare I say it - DMR. Locked to semi auto and uses a pneumatic HPA kit (PDiK) so needs no battery. Internally regulated and has a 13ci/3000psi bottle in the Mancraft MASS stock. Has all the responsiveness of HPA but doesn't have an external line getting in your way if you're laying down a lot to snipe. Cerakoted in half graphite, half burned bronze mix.
 
Not used a whole lot in skirmishing as sniping isn't for me
 
Internals
Mancraft PDIK engine Wolverine Storm v2 regulator  
PDI 6.01 barrel ProWin hop unit Flat hopped  
Externals
Licensed SA receiver set from G&P Mancraft MASS air stock Cerakoted by Hi-Spec Coatings G&P MOTS wirecutter rail G&P rifle length outer barrel 5KU ambidextrous selector (does not work ambidextrously due to the way the PDIK works - one side of the selector is just for show, in short) 5KU ambidextrous mag release (this does work) Clone Harris style bipod  
Extras
6x no-name MOE-style midcap 70rd magazines with genuine Magpuls and Mapleleaf enhanced springs for reliable feeding Visionking 3-9x42 with clone Larue quick release mount (mount modified a bit underneath to stop wobble) SOLD G&P DBAL v1 (has the IR modes etc. working that you'd expect) Split into another listing Nuprol carry case with custom foam (pick and pluck but then sealed over with sprayable vinyl for longevity)  
Delivery & Payment
If you really want to 'gift' your PayPal payment based off my previous feedback I will knock off half of whatever the fees are I will accept a return of this in un-skirmished condition within 30 days with no questions asked. I will also pay half of your return postage fees Delivery will be by Parcelforce 48 and I can dispatch within 3 working days of payment (probably sooner but can't be sure).  
I'm not really after swaps unless it's a pistol + cash my way.
 
The regulator can be tournament locked, but it's little fiddly to do (not that you'd want to often).
 
My availability during the days and evenings is very limited so viewing it in person will be difficult. This is why I offer a 30 day returns period and will pay half of the return postage if you change your mind.
 

New price as scope and DBLA to be sold separately.
 
PDIK - dare I say it - DMR. Locked to semi auto and uses a pneumatic HPA kit (PDiK) so needs no battery. Internally regulated and has a 13ci/3000psi bottle in the Mancraft MASS stock. Has all the responsiveness of HPA but doesn't have an external line getting in your way if you're laying down a lot to snipe. Cerakoted in half graphite, half burned bronze mix.
 
Not used a whole lot in skirmishing as sniping isn't for me
 
Internals
Mancraft PDIK engine Wolverine Storm v2 regulator  
PDI 6.01 barrel ProWin hop unit Flat hopped  
Externals
Licensed SA receiver set from G&P Mancraft MASS air stock Cerakoted by Hi-Spec Coatings G&P MOTS wirecutter rail G&P rifle length outer barrel 5KU ambidextrous selector (does not work ambidextrously due to the way the PDIK works - one side of the selector is just for show, in short) 5KU ambidextrous mag release (this does work) Clone Harris style bipod  
Extras
6x no-name MOE-style midcap 70rd magazines with genuine Magpuls and Mapleleaf enhanced springs for reliable feeding Visionking 3-9x42 with clone Larue quick release mount (mount modified a bit underneath to stop wobble) SOLD G&P DBAL v1 (has the IR modes etc. working that you'd expect) Split into another listing Nuprol carry case with custom foam (pick and pluck but then sealed over with sprayable vinyl for longevity)  
Delivery & Payment
If you really want to 'gift' your PayPal payment based off my previous feedback I will knock off half of whatever the fees are I will accept a return of this in un-skirmished condition within 30 days with no questions asked. I will also pay half of your return postage fees Delivery will be by Parcelforce 48 and I can dispatch within 3 working days of payment (probably sooner but can't be sure).  
I'm not really after swaps unless it's a pistol + cash my way.
 
The regulator can be tournament locked, but it's little fiddly to do (not that you'd want to often).
 
My availability during the days and evenings is very limited so viewing it in person will be difficult. This is why I offer a 30 day returns period and will pay half of the return postage if you change your mind.
 

This is my never-skirmished LCT AK74 with a Daytona Gun kit installed. Selling because it's been sitting in its case for close to a year now. I suppose this is as technically 'new' as you could get a kit like this - the only thing 'used' would be the actual shell of the receiver, but even this has been sand-blasted and refinished. Nothing else has ever been used except for running some BBs through the gun during installation.
 
The gun itself is Cerakote'd in a mix of gunmetal grey and titanium, so it has a slightly blueish hue to it. Hopefully the camera picks this up, but let me know if you want more pictures.
 
Internals
Datyona Gun gen 3 LCT/E&L AK kit from Blackblitz (though I installed this myself) https://www.daytonagunairsoft.com/collections/conversion-kits/products/daytona-hpa-lct-ak-rpk-kit EU-spec high pressure line (please note this carefully as you will need an EU-spec hose for your HPA rig - these cost around High RoF recoil spring POM crush ring Has had around 2000 rounds shot through it - will need a further 6000 cycles for break-in  
PDI 6.03 barrel Flat hopped  
Externals
Cerakoted by Hi-Spec Coatings Real steel MOE AK grip (modified internally to fit the Daytona Gun kit Real steel BATTLELINK Minimalist milspec Stock
Ambidextrous magazine release - Hephaestus I believe, but could be wrong
Hephaestus type A selector
Clone MOE angled foregrip (modified heavily to fit up against the mag well)
Asure Dynamics B10M set (the rail)
LCT stamped top rail dust cover
LCT TK104 stock tube
Madbull sound hog
 
Extras
5x MAG midcap 100rd magazines with genuine Magpuls Nuprol carry case with custom foam (pick and pluck but then sealed over with sprayable vinyl for longevity) Carry case has a cutout for the Holosun HS510c being sold here: https://airsoft-forums.uk/classifieds/item/6207-holosun-hs510c/  
Delivery & Payment
If you really want to 'gift' your PayPal payment based off my previous feedback I will knock off half of whatever the fees are I will accept a return of this in un-skirmished condition within 30 days with no questions asked. I will also pay half of your return postage fees Delivery will be by Parcelforce 48 and I can dispatch within 3 working days of payment (probably sooner but can't be sure). I'm away for on week at the end of September and won't be able to post during this time  
I'll accept offers but please keep them reasonable. The amount of labour that goes into pulling together a DG kit is quite high so keep that in mind when considering your offer and check Blackblitz if you want an idea of what kind of value is in the kit and labour itself.
 
If you have never owned a DG before please do your research (I can answer any questions if you buy it) and consider the additional cost of buying decent lube for this gun. GetSome1000 is recommended and I can provide a bottle to get you started (not easy to get in the UK).
 
I'm not really after swaps unless it's a pistol + cash my way.
 
My availability during the days and evenings is very limited so viewing it in person will be difficult. This is why I offer a 30 day returns period and will pay half of the return postage if you change your mind.
 

This is my never-skirmished LCT AK74 with a Daytona Gun kit installed. Selling because it's been sitting in its case for close to a year now. I suppose this is as technically 'new' as you could get a kit like this - the only thing 'used' would be the actual shell of the receiver, but even this has been sand-blasted and refinished. Nothing else has ever been used except for running some BBs through the gun during installation.
 
The gun itself is Cerakote'd in a mix of gunmetal grey and titanium, so it has a slightly blueish hue to it. Hopefully the camera picks this up, but let me know if you want more pictures.
 
Internals
Datyona Gun gen 3 LCT/E&L AK kit from Blackblitz (though I installed this myself) https://www.daytonagunairsoft.com/collections/conversion-kits/products/daytona-hpa-lct-ak-rpk-kit EU-spec high pressure line (please note this carefully as you will need an EU-spec hose for your HPA rig - these cost around High RoF recoil spring POM crush ring Has had around 2000 rounds shot through it - will need a further 6000 cycles for break-in  
PDI 6.03 barrel Flat hopped  
Externals
Cerakoted by Hi-Spec Coatings Real steel MOE AK grip (modified internally to fit the Daytona Gun kit Real steel BATTLELINK Minimalist milspec Stock
Ambidextrous magazine release - Hephaestus I believe, but could be wrong
Hephaestus type A selector
Clone MOE angled foregrip (modified heavily to fit up against the mag well)
Asure Dynamics B10M set (the rail)
LCT stamped top rail dust cover
LCT TK104 stock tube
Madbull sound hog
 
Extras
5x MAG midcap 100rd magazines with genuine Magpuls Nuprol carry case with custom foam (pick and pluck but then sealed over with sprayable vinyl for longevity) Carry case has a cutout for the Holosun HS510c being sold here: https://airsoft-forums.uk/classifieds/item/6207-holosun-hs510c/  
Delivery & Payment
If you really want to 'gift' your PayPal payment based off my previous feedback I will knock off half of whatever the fees are I will accept a return of this in un-skirmished condition within 30 days with no questions asked. I will also pay half of your return postage fees Delivery will be by Parcelforce 48 and I can dispatch within 3 working days of payment (probably sooner but can't be sure). I'm away for on week at the end of September and won't be able to post during this time  
I'll accept offers but please keep them reasonable. The amount of labour that goes into pulling together a DG kit is quite high so keep that in mind when considering your offer and check Blackblitz if you want an idea of what kind of value is in the kit and labour itself.
 
If you have never owned a DG before please do your research (I can answer any questions if you buy it) and consider the additional cost of buying decent lube for this gun. GetSome1000 is recommended and I can provide a bottle to get you started (not easy to get in the UK).
 
I'm not really after swaps unless it's a pistol + cash my way.
 
My availability during the days and evenings is very limited so viewing it in person will be difficult. This is why I offer a 30 day returns period and will pay half of the return postage if you change your mind.
 

For sale is a DG Mk46. Only installed the kit, never used. It is in a CA M249 receiver. Comes with CA boxmag, and Flyye sling. 
It is located in Hungary, EU. Price is 700 Euros plus shipping.
 

*Updated*
 
I'm trying to reduce the amount of stuff I have kicking around and never being used so here is the first lot for sale. Please check my other threads as I will combine postage and do deals etc. I've been out of it a bit so prices may be off so please feel free to make me an offer 

RS 20rd M16 magazine with 2 inert rounds - £15
Viper radio pouch - £4
WAS large medic pouch - £10
Snugpack response Pak (brand new) - £12
Glock shooting sports cap (universal size but more small/medium) - £2
Russian/ Soviet Telnyashka stripped shirt (more dark blue) - £2
Soviet flag (think new, been in draw for years) -£2

Free with any purchase 
5.11 patch
 
 
Please check my other threads as I have a few bits for sale and am happy to combine postage and strike a deal or two.  I've been on Arnie's and Zero one for years but new to this forum (+loads on eBay) encase you're concerned about the low post count. Many thanks

this E&L ak is the closest you can get to the real thing !!! 
very sturdy high quality build , its shooting at 345FPS using .2s
 
I am including 5x E&L Bakelite 120rnds mags , a scope rail  and 2x Nuprol 7.4v 1200mah lipo batterys , the price also includes postage
 
These rifles are made using the Real Manufacturing process of the real ak's , they all come with a Cerfificate of Authenticity too!
 
 
its less than a week old, my reason for sale is that i have now joined a team and our primarys need to be the same...

Afternoon All,
 
I'm having to thin down my collection, so up for grabs in my Tokyo Marui M40a5 complete with with upgrades. This rifle has only been used for testing and as such is boxed in perfect condition.
 
Upgrades Installed:
Action Army Sears (£60)
Action Army Teflon Cylinder & Cylinder Head (£75)
Action Army Piston (£30)
Action Army M135 Spring (£10)
Action Army Spring Guide (£20)

Parts included, but not installed:
LayLax M40a5 6.03 x 280mm Barrel (£45)
Action Army M40a5 M150 Spring (£10)
 
The rifle works and shoots well, currently on the M130 spring the FPS is 390 on .2s and 1.4J on 48's. This will increase with the M150 and new barrel to around 2/2.3J.
 
Considering the cost of the rifle new is £300 and an additional £250 in upgrade parts bringing the total to £550, asking price is £400 delivered.