BRThoughts

Thanks for that link Mik3F. Like it says in the vid AAP seems to ship with hop turned off. Adjusted it as described and now it’s snappy as hell. Thanks mate!

I used the rolled-up sandpaper technique to smooth the inside of the lower feed lips and it seems to have done the trick. Thanks everyone. Now I have another issue; every time I rack the slide a BB literally falls out of the end of the barrel so if you pull the trigger the chamber is empty and it just dry fires. They just go right through as soon as they enter the chamber. Any thoughts?

I bought myself an AAP-01C pistol and it’s great but the BBs don’t feed right to the top of the magazine. Much fiddling and different BB brands have made no difference. Are the stock springs on these crap and should I look for a better one? Are the tolerances in the top plastic part too tight? Has anyone else had this issue and figured out why it happens? Thanks for any info.

Just got an SRU-Precision bullpup chassis from Taiwan and fitted it to a Bravo Company VFC GBBR. Powering it with HPA through a TAPPairsoft M4-AR adapter. Added a Maple Leaf Hummingbird short-stroke bolt to replace the stock-tube recoil spring, which is great because the original recoil was distractingly strong. It seems to need higher pressure than expected but I've heard these V3 guns have steel internals so they can take whatever pressure you put through them. Can’t wait to skirmish with it in a fortnight.