JuggyUK

Can anyone recommend a custom painter, airbrush artist? I'm planning a one-off custom gun and will need a special paint job.

Need a little advice, I really like the SCAR-H but not sure which brand is better. TM seems the obvious choice, should I be looking at something else? Is it advisable to buy 2nd hand to save a bit or should I rather buy new?

Thank you for the advice and suggestions everyone, much appreciated.

Yeah, they said OK to red lasers when we were there on Wed last week if I remember correctly but most sites don't allow them at all. I'll stick with the Feyachi light, fitted it to my RIF and glued the switch pad to the front grip so I can operate it with my thumb. Seems to work pretty well so far but haven't tested it irl yet

This is a great help, thank you. I'm going to look around for a sling plate that is a more accurate fit, hopefully I can find one.

Ah, you make a good point. My inexperience shining through there This is the style of stock I am wanting to use

It seems these SA original parts are quite difficult to find online unless my Google skills are not as good as I thought they were. I assume the PTS stock can be just about any brand but the tube and sling plate should preferably be SA.

Thanks, that little Brighter C looks like a really nice option for pistols

Thank you, I have dealt with Combat South a few times in the past and have always been happy with them. A great bunch of guys. I have ordered the Blaster, just not too sure about the Ngal and what switches to get for my use case.

Myself and my kids played at UCAP Bunker on Wed last week and thoroughly enjoyed it however the lack of having lights and tracers made it very difficult. What are considered good lights and tracers for CQB? I've looked at the Feyachi FL17 light which looks quite good and is well priced. Also, the Acetech Bifrost and Blaster units looks quite good. What would be other brands/models worth looking at? Thanks in advance.

I'm looking to convert my SA-X02 to a PTS stock mainly due to battery capacity and also the standard stock size is a bit small for me. Can anyone advise how and what parts I would need? Thanks in advance.

Apologies for resurecting this thread. I have a KWA Eve-9 with Gate Titan installed, I need to pull the gearbox apart to clean some dirt from the Titan sensors and would like to install a few upgrades while I'm about it. From reading this thread I gather the following upgrades are best. SHS motor (high speed or high torque?) XT piston head Madbull Piston Anything else worth doing? I do not mind spending a bit of cash on getting it running nicely.

Thank you, no noticeable scuffs or marks at all.

I have a fairly new, good condition KWA that I am considering selling. Has 5x standard original KWA 120 rounds mags as well as a 400 round KWA high capa. Also comes with Gate Titan V2 Bluetooth installed. Box and all accessories as well. Any thoughts on what I can ask for it?

I have an Overlander VSR Mini, will that do?

Thanks, I'm going to pull it apart this weekend and take a look. The Titan also started doing something weird recently, I cannot set the Auto selector to Burst so maybe it does all just need a good clean inside.

I have a KWA Eve-9 that needs looking at. Has a Gate Titan II BT installed and suddenly started throwing a sector gear sensor error. I installed it myself and was working fine until a few days ago.

That is very handy if you have the knowledge and testing equipment but not so easy for the average Joe.

I guess for me it's about getting what I paid for and not some bad quality battery that doesn't deliver what's written on the packaging. I know this is probably a bad example but I would never use the cheap batteries that come with electronic goods. I always replace them with Duracell or Energizer because I know the qualify is good and the battery is reliable.

I’m looking for a sight for my SA-X02, I currently have a Feyachi RDS-25 on my KWA but looking for holographic for this one. Budget is around 60 Quid, prepared to go up a little if it’s good. Any advice, personal experience with something good at a reasonable price?

One of the reasons I’ve chosen Turnigy as my preferred battery, they seem to get very good reviews and when tested are close to stated specs

Thanks, I have a mild understanding of the C rating. I have a few 20/40C 1000 mAh batteries and have ordered a 15/25C 1200 mAh to check physical size in my RIF.

Interstingly the Turnigy batteries are larger than the Nuprols I have. My Nuprol 1450mAh 11.1v battery is smaller than the Turnigy 1000mAh 11.1v.

My first was a KWA Eve-9, I chucked a Gate Titan BT in it, apart from that it's stock. Very happy with it. Recently I bought a Specna Arms Edge 2.0 SA-X02 which I also really like. Both really good guns at what I consider fair prices. The KWA has a v2.5 gearbox specific to the gun so upgrading the gearbox with an Eon from Gate or similar cannot be done (as far as I know).

Thanks, I am using 11.1v already so should be good. I looked at those but they may be a bit thick for the Double Eagles. I'll purchase 1 and check but I know for sure the 1000mAh will fit and should last 3 or 4 30 minute sessions the way we play.