metaljoelmole229

found a fix i think i left precooking on as i replaced it with a m100 spring and 1.2 joules

On first bullet point yes but stuck with og hop and fps was constantly at 230 and swap back to stock barrel bucking and swap og hop with zci and nozzle to a zci one and fps now at 230 but ever random shot like 1 in 10 jumps to 270 and I am using .25. Sorry for the wait for response personally issues sorry. Guy found fix. give up hpa it and pretend I didn’t wanna have a aeg. jokes aside I was thing of hpaing it in the near future but gonna use this in a cyma.

No it’s not I did check and is that actually possible with the teeth on it?

Sorry I’m a little late, love ur site main brought it all from u expect 3 things change: motor 22 tpa gear to shs 13:1, gate aster v2, maple leave mr 60, maple leaf barrel with the slip thing for the mr hop. compression is stock. but I have switch back to the old bucking and barrel and now getting 230fps and I thought it was the barrel and bucking cuz with the maple jet and mr hop I was betting 100 fps nozzle idk but with both bucking lips touch nozzle and the nozzle is stock j did try switch it with one I got in a compression kit from u and exact same results but I changed the hop to the ZCI with that nozzle and like 1 in 10 shoots hit 260fps

I had a look and they meat nicely but when I blow down the barrel air escapes in the hole the nozzle goes does that mean I need a thicker nozzle?

Do u know what nozzle I will need for a ZCI hop?

Sorry I mean now all shoots are 230 sorry for the confusion

Hi all just wonder what I did wrong when upgrading my delta armoury I put in 13.1 gear and gate aster and 22tpa motor and swapped out the hop unit to a zci plastic and maple leaf mr 60 bucking and the gear box hasn’t lost air seal and neither has the hop unit but when putting old hop on it’s the same if not lower. anyone got any ideas?