Gryphus

As the title states I am looking for this particular combination of items for my planned M16A2 conversion from my VFC M733. I am willing to pay a premium for them assuming they are in mint condition. Looking to offer Anywhere between £200-250 for it depending on condition! Please PM me if you have a set you want to get rid of, I will be more than happy to take it off your hands and also pay for its shipping!

Selling my new-ish FAL OSW for the sole reason to fund a new airgun that I really wanted. Really don't want to part myself from this rifle but intrusive thoughts won 😭 Gun is accurate and functions out of the box with no hiccups whatsoever, almost zero wear on it aside from the obvious selector scratch that every FAL gets and a bit on the hinges of the folding stock. Comes with one gas tight mag. Just bear in mind this has no npas pre installed and it shoots a little hot out of the box currently (360 fps w/0.25g). I also had this for roughly only a month. Will be shipped via PF48 and payment via Paypal; all in for £490! If you have any questions or need more photos please dm me.

It is with a heavy heart I am selling this gun that I have poured hours into, building it and and heavily modifying it as I am now moving on to my next project gun. This gun was built primarily as a test of how well I am able to build a gun completely on my own. It is very snappy with a short cycle thanks to its dual sector gear and it has been shimmed to eliminate the whiny noise you hear from a typical aeg, and has an extremely high fire rate of 60 RPS! (3600 RPM). This gun also contains a custom machined tappet leg made of 7075 aluminium in order to resolve the common issue of the leg snapping off when built in this configuration and has a Perun ETU built into it. There's a bit too many to mention what I did here so I will just list it below: - SHS 18:1 dual sector gear set (Sector gear has one tooth shaved off on each side of the release side to resolve tappet timing issues) - Warhead Base 45k RPM Brushless Motor - Airtac Speed trigger - SHS Nylon piston with steel teeth - FPS Softair piston head - Lambda 280mm 6.03 Steel inner barrel - 3x Mags w/ Superfeed springs installed so it can feed at 60 RPS. - Krytac Vector Perun ETU (2 round burst has been configured to fire at binary) - 10.5 inch outer barrel (stock one included in the box) - Steel muzzle brake - Maple leaf MR Hop 60 deg bucking - Maxx nozzle w/ dual oring 21.5mm - Guarder SP160 spring (please be very careful when taking the gearbox apart, this spring is very strong) - Custom made tappet plate with a 7075 aluminium machined tappet leg - Gearbox modified internally to allow the fitment of the gear set - FLT 8mm Bushings - SHS Steel shims Aside from the shimming the gun has been AoE corrected and unnecessary teeth on the piston has been dremeled off to reduce the weight of the piston. The gun fires consistently at 1.1J with (300 FPS) at 0.25g, dropping down to roughly 0.8J in full auto fire. Comes with the original box as well, and the original barrel & muzzle brake + all of the accessories pertaining to this version of the gun including the certificate stating this gun has a unique serial number of KLB-2695. All of these parts together including the gun costed me just over £1100, but I am asking for £490 for all of this. Payment via PayPal G&S, and delivered via Parcelforce 48 or you can come and pick it up, based near Manchester. I am happy to include videos and more images of this gun if you desire.

I'm selling this TM Saiga 12K which originally belonged to my sister (hence the two tone) who tried to get into airsoft but sorta realized it wasn't really for her. This is a relatively brand new Saiga 12K that is only a few weeks old. Its near pristine externally except with quite a bit of wear on the dust cover only as she tried to get rid of the rattle that all Saigas have. Internally is in top condition being a gun that is barely used. Comes with the original box and 1x 45 round mag, the rattling noise is also eliminated on this one. Looking for £345 shipped for this. Luckily the two toned bits are easily replaceable with aftermarket stock & handguards! For any other questions please contact me. I am also open to offers for this.

It is with a heavy heart I am selling this gun that I have poured hours into, building it and and heavily modifying it as I am now moving on to my next project gun. This gun was built primarily as a test of how well I am able to build a gun completely on my own. It is very snappy with a short cycle thanks to its dual sector gear and it has been shimmed to eliminate the whiny noise you hear from a typical aeg, and has an extremely high fire rate of 60 RPS! (3600 RPM). This gun also contains a custom machined tappet leg made of 7075 aluminium in order to resolve the common issue of the leg snapping off when built in this configuration and has a Perun ETU built into it. There's a bit too many to mention what I did here so I will just list it below: - SHS 18:1 dual sector gear set (Sector gear has one tooth shaved off on each side of the release side to resolve tappet timing issues) - Warhead Base 45k RPM Brushless Motor - Airtac Speed trigger - SHS Nylon piston with steel teeth - FPS Softair piston head - Lambda 280mm 6.03 Steel inner barrel - 3x Mags w/ Superfeed springs installed so it can feed at 60 RPS. - Krytac Vector Perun ETU (2 round burst has been configured to fire at binary) - 10.5 inch outer barrel (stock one included in the box) - Steel muzzle brake - Maple leaf MR Hop 60 deg bucking - Maxx nozzle w/ dual oring 21.5mm - Guarder SP160 spring (please be very careful when taking the gearbox apart, this spring is very strong) - Custom made tappet plate with a 7075 aluminium machined tappet leg - Gearbox modified internally to allow the fitment of the gear set - FLT 8mm Bushings - SHS Steel shims Aside from the shimming the gun has been AoE corrected and unnecessary teeth on the piston has been dremeled off to reduce the weight of the piston. The gun fires consistently at 1.1J with (300 FPS) at 0.25g, dropping down to roughly 0.8J in full auto fire. Comes with the original box as well, and the original barrel & muzzle brake + all of the accessories pertaining to this version of the gun including the certificate stating this gun has a unique serial number of KLB-2695. All of these parts together including the gun costed me just over £1100, but I am asking for £490 for all of this. Payment via PayPal G&S, and delivered via Parcelforce 48 or you can come and pick it up, based near Manchester. I am happy to include videos and more images of this gun if you desire.

Selling my old KWA MP9 that I got before I had my Ukara in two tone blue. Luckily the two toned parts can be easily replaced with aftermarket ones or OEM ones. The gun has been well maintained and its only had one game and still functions like the day I got it out of the box and its a joy to shoot with its high fire rate & how loud it is!. Mag is gas tight. The entire package comes with: -KWA MP9 -1x 48rd Mag -Original box Looking for £80 for this. Will be delivered via Parcelforce 48. If you have any questions please dm me!

Selling 3 of my optics at great prices! - Vortex Strykefire II 1x Red Dot £90 - SOLD - Victoptics S6 LPVO 1-6x £80 - Hawke 3-12x50 SFP Scope £80 All of these items are shipped at my expense and are in pristine condition. Please let me know if you are interested in any or have any questions!

Selling my Aegis FMG 9 fitted with a TM G18c pistol inside. Also includes: -WE G17 long mag -Extended 6.01 inner barrel (forgot the length unfortunately!) -Lambda extended outer barrel kit for Aegis FMG9, inc TDC hopup Gun works very well with minimal wear (except the mag). The slide has been slightly deformed due to TM plastic but it does not interfere with the function of this gun. Asking for £150! Postage is FREE! Payment via PayPal is preferred. Any questions please message me!