Wegalaxy

My CT-25 keeps burst firing and I've tried different gases as suggested but it's not working. I completely disassembled the lower of the gun. Everything thing looks fine. Here is a diagram of a CT-25 exploded. Can any one suggest a part number on what I should order to attempt to fix this? Thanks VID_20241022_143946.mp4

I just held it and tightened it. Problem fixed. I just had to use some plyers haha

Hello, I have a few days until a game and my ARP 9 g&g drum mag I have just bought new is having a very annoying problem!!! The feeding tube at the bottom end keeps coming out!!! I have tried hand tightening it into the base where these treads are but it keeps popping out. Nothing looks cracked or broken. Does anyone know how to securly tighten the tube to the bottom of the Mag or have a just bought a lemon??? Thanks

Hello, When using the stock ARP 9 hi capa magazine. It will feed about 7 shots when fully wound then double feed or stop firing all together. If I slap the magazine or take it out and out it back in I can shoot about 10 before the same problem occurs. I tried someone else's magazine and had no problem, so it's obviously my magazine that is the problem. I have tried dissembling the mag for cleaning and service as I have been using it straight for 2 months now. I have used this guide. https://imgur.com/gallery/how-to-disassemble-arp9-high-cap-magazine-8RQ3WnL But it does not say how to get to the workings. I could not find how to disassemble the workings as I could not find any obvious screws which would come out. Does any one know how to fix this problem or know how to disassemble the internals of the magazine? Thanks

Hello, When I played airsoft as a teen 2015-2016 I played at Cerberus in west Yorkshire at the works, sand pit and out post. And man it was fun. My first experience of airsoft and i loved it. I then started airsoft again in 2022-present with first and only. I see online that Cerberus airsoft has closed permanently. Is this true? Thanks

Hello @Galvatron The laser and light are supposed to come on together when I press it. It is supposed to stay on constantly. I don't have to hold it down. I am just demonstrating how it just flickers when turned on. I have however cranked down on tightening the battery cap really tight and it seems to have fixed the problem.

Here is a video of the problem. I tried to disassemble it but I can't figure it out. VID_20240918_185250.mp4 The problem must have been camera shy. I screwed the cap on really tight now its working haha

Hello @Sewdhull. I have done and it all looks fine to me. Do you think anything else is causing the problem? Thanks

Hello, I own this PEQ box and have owned it for close to a year. https://www.amazon.co.uk/dp/B071HYS6MX?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 When pressing the power button on the top the torch and laser come on but 80% of the time the light keeps flickering and is very dim along with the laser. I have changed the batteries but still the same effect occurs. I have also put a ball of tin foil in the battery tube to increase the chances of the connection going through but this still has the same effect. Does any one know how to fix this problem? Thanks

Thanks looks like I'm ordering some 😁

Hello, So I play outdoors mainly and I am starting to do CQB more often. I play on average once a week. I use a 209 primer BFG timed. Whenever I throw the BFG or see a flash bang get thrown I cover my ears with my hands. I look a bit strange when I do this haha but it works muting the sound. I sometimes cannot cover my ears in time for example if someone throws a flash bang at my feet. So this brings me to the question. Would it be worth buying active hearing protection as I really don't want to damage or lose my hearing as I airsoft regularly. Or is my technique good enough? And if I need some does anyone have any recommendations for affordable protection as I am not fussed about top dollar. Thanks

Thanks, base ball cap it is

So I'm getting more dpm gear to complete my load out. I'm split between a Boonie hat or a base ball cap. What would be better for protection from being hit in the head??? Also can you see down your sights whilst wearing a Boonie hat with out hanging bits getting in the way? Thanks

Hello, My vorsk eu18s magazine base plate has cracked. I am struggling to find replacement base plates from vorsk which are in stock. Would WE tec or any other brand base plate fit on this magazine as I am not a big fan of the extended look. Thanks

Thanks everyone I appreciate it

Hello, I recently put a 21mm by 3mm acrylic disc on my torch for use in CQB. It cracked after taking a BB. But still held up. I am struggling to find a polycarbonet discs at 21mm as I feel it would be stronger to replace it. Does anyone have any links? Thanks

Hello everyone, I own a WE CT-25 and a very strange fault has occurred. Even tho its a very cool fault I would like to get the issue fixed. When firing the CT-25 it sometimes goes into burst fire, firing 2-3 BBs at once. As you may know the CT-25 is only a semi pistol. The internals look fine and I have re oiled the pistol but the issue continues. Would anyone be able to advise me on how to fix this issue? Thanks

Thanks everyone I have ordered the correct part.

Thanks this is great!!! @Cannonfodderwhich model would I select? Abit unsure which is the right one. Thanks 😊

Hello @DanBowI have tried and it does not work.

Hello everyone. Need some help quite quick as I have an Airsoft game next Sunday. My battery's balance cables plastic housing has cracked. ☹️ I can't find any clips for sale online. Does anyone know a link to where I could order them??? As I need them sharpish. Thanks

Sorry @JG97thanks for the offer but after hearing how much it's worth and the amount of money I've spent getting everything together I think I'm going to keep it. I might hpa it in the future 😊. Happy Airsofting

Thanks for the reply. And oh no that's crazy how low the value is 😂 I'll just keep it!!!

Hello, I am thinking about selling my hi capa, just looking for an appraisal. The pistols well used but everything works, comes with 2 mags, pistol case, original box, after market rail, mock suppressor, assortment of mounts for the rmr and a replica trijicon rmr. Roughly how much would this be worth? Thanks.