
Wegalaxy
Members-
Posts
157 -
Joined
-
Last visited
-
Days Won
1 -
Feedback
0%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Wegalaxy
-
Hello, I play at FAO sites indoor and there limit for .25s is 307 fps. I use a arp 9 with a gate aster with a fairly new piston and seal installed (run on 11.1 lipo) My gun is shooting 312 fps on .25. Which is annoying as I want to use it indoors and out. How do I drop the FPS ever so slightly without changing the hop up or changing weights? Use it more? Leave it in pre cocked over night? Drop down to 7.4 lipos? Thanks
-
Hello, I am considering selling 5 x 1,100 11.1 volt lipos batteries or possibly swapping them. But I am looking to down grade for some 7.4s similar size in deans. The 3 nuprol batteries are around a year old and have been heavily used. The plastic wrapping on some of them have started to crack and are a little puffy but ever so slight. But the 2 Hilldow batteries are around 3 months old and are practically new. ( all batteries are numbered from 1-5 with my label machine to keep track of circulation ) All batteries still hold a charge but the nuprols only hold around 80% of a full charge. I would estimate the value at roughly around £40. £45 if posted. Is my estimation correct? Thanks Many thanks
-
Are 11.1s correct for my gun after the work that has been done to it???
Wegalaxy replied to Wegalaxy's topic in Electric Guns
Hello, @ak2m4the gear set is this. https://www.thecageairsoft.co.uk/zci-cnc-gear-set-14-1/ Do you think they are up to the task? Thanks -
Hello, So I own a ARP 9. Here is a list of all the new parts that it has over the past year. Converted to deans Gate aster Quantum trigger friction pro hop rubber So recently I have had a new gear set put in as the stock g&g one packed it in. I believe it was a 18/1 gear ratio. I have had a 14/1 hi speed gear set installed. (still with stock motor). It shoots 25 RPS and shoots 307 fps on .25s. I will be shooting in binary and semi only and this gun sees heavy use as it is my only AEG. So here is my question. Should I continue to use the 11.1s or down grade to 7.4s even to the gun shoots and operates fine? As I hear people saying 11.1s will damage my gun with the new 14/1 gears. But I have 5x 11.1 1,100 mah batteys and it would be expensive to replace. Looking forward to hearing you opinions as I wont the most life out of my gun. Thanks.
-
Thanks. I will have a look. Just a quick question. Using 11.1 lipos with 1/14 gears. Will this effect the gears life span in the long run? Are you only supposed to use 7.4s with 1/14? Thanks
-
Hello, I have had a new gear set in my ARP 9 which is a 1/14. These are high speed gears and they are in my ARP 9 with a gate aster installed. After I had them installed I fired 200 rounds on full auto bursts and semi on 11.1 lipos. Then nothing, The piston just stopped and a bb was waiting at the end of the nozzle. (I removed the BB). Now it doesn't beep when I plug in the battery and the aster just flashes red. It had the stock gears in and worked fine before the install. What has gone wrong? Any ideas? Thanks
-
@The_Lord_Poncho thanks i appreciate this. Tbh I don't really want to extend the barrel. But tbh I think with a 5 inch barrel I'm kinda stuck for options 😅
-
Hello, I own a ARP 9. I use 11.1 lipos with. 25 bbs. Its shooting 300 FPS. It has stock barrel and hop rubber and unit. When I adjust the hop I cannot find the sweet spot. It's always too much or too little. Would anyone recommend a drop in hop rubber that would improve this? Thanks
-
Hello, Would anyone have a link to a lens protector or kill flash that fits the sig romeo 5? Thanks
-
Hello, After hours and hours of suffering fitting a new hammer to my vorsk eu18 after the original one snapped I have now come to the last hurdle. When everything is installed the trigger does not engage with the hammer meaning the hammer is not falling and just stays sprung back. I believe the problem is that I am not installing the trigger bar into the hammer correctly. Is there a specific technique? As the videos online just say "hook it in". But its not working Any advice would be very welcome. https://www.youtube.com/watch?time_continue=2063&v=WlRYq2tD7aQ&embeds_referring_euri=https%3A%2F%2Fwww.google.com%2Fsearch%3Fq%3Daap%2B01%2Bdisassembly%26rlz%3D1CAPKUQ_enGB877GB877%26oq%3Daap%2B01%2Breassemb%26gs_lcrp%3DEgZjaHJvbWUqCQgBEAAYDRiAB&source_ve_path=MjM4NTE Time stamp. 34:23 Thanks
-
Thanks @BigStewI appreciate this
-
Hello, Here is my we CT-25 and I would like it appraised to see if it is worth selling it or paying someone to fix it. Problem 1: It fires burst on semi (main problem) Problem 2: When racking the slide sometimes the hammer dosent stay back. It will come with the original box and dry fire enabling nub along with multiple O rings for the magazine base plate. How much roughly would this be worth? Thanks
-
Hello, I have recently had a gate aster put into my ARP 9. I use 1,100 11.1 batteries. All my batteries were converted from tamiya to deans to accommodate the gate asters dean power connector. Before the aster would get half way through a day with 1 of the batteries. Now I can only get through 1 fourth of a day with one of these batteries. Is this down to the gate aster system with its optical trigger using more power con paired to the stock g&g button trigger unit??? Thanks
-
@Anonymoose Apparently the laylax gas router concentrates the flow of gas more increasing fps. Thats all I know really.
-
@heroshark @Diablo675! Hello, Thanks for the info. Regarding it only adding 10 FPS it sounds like it's not worth the trouble. I'll leave it as is. Thanks
-
@ButcherBill I understand that vorsk isn't a great brand. But regarding my original question. Would the upgrade and additional stress? Thanks
-
Hello, I use a vorsk eu18. I was thinking about getting a upgrade for it by installing these. https://www.firesupport.uk/laylaxnineball-gas-router-for-tokyo-marui-glk-g17g18c-magazine-2pcs.html I have heard they can add up to 50 fps onto your velocity. My only worry is. With the added pressure and how powerful the gas routers will make the green gasses journey, will this add more strain onto my pistol and risk breaking it ? As it is only stock and I have already been through 1 hammer shearing off from normal use. Thanks
-
Is this the ultimate air soft cheat code???
Wegalaxy replied to Wegalaxy's topic in General Discussion
@ruskitseller With the double eagle spring one I linked using .25s and no hop I am able to hit people 60-70 meters away. Once 80 but that was I believe by chance. -
Is this the ultimate air soft cheat code???
Wegalaxy replied to Wegalaxy's topic in General Discussion
@RostokMcSpoons. The tri shot ones are alot harder to pull back and not as impressive performance. But if you pump the double eagle single shot 3 times and keep the barrel teetering upwards so the bbs dont fall out you can use it as a multi shot gun. Thanks -
Hello, So I bought a double eagle single shot spring shotgun with 2 extra mags just in case my AEG fails on a game day This specific one. https://bbguns4less.co.uk/products/double-eagle-m58a-tactical-bb-shotgun-m500-in-blue.html And it is amazing!!! On .25s it shoots 300-305 fps and its accuracy and range is crazy. It only holds 14 bbs in the mag and I only shoot it when I know I am going to hit someone. I get more people out with it than I do with my £400 custom ARP 9. Even seasoned players are amazed with its performance and I have played with it for a full day on multiple times. So here is my question. Why is it so good??? Is it something about springers that are so reliable and accurate? Food for thought happy new year. Thanks
-
thanks guys I just wanted a quick opinion on that one. i will go with what i found by doing it my way. This concludes this topic. Thanks
-
@Colin Allen @Skara @Adolf Hamster Hello, So I have shimmed my gear box and its OK. But sods law has occurred. The missing shim has emerged . I now have all 5 factory shims it came with. Every gear had a shim on it both sides when I opened it up apart from the bevel gear which does not have a shim on the top side. (if the gear box shell was laying with its left side down.) So this brings me to my last question if anyone would have the slightest clue. Here are all the measurements of the factory shims. 0.1,0.25,0.45,0.45,0.45 There is a pattern occurring here where the width is kind of dipping. Would anyone recommend the way I should lay these out? No worries if not. many thanks
-
thank you @Colin Allenlooks like I am watching a how to video. haha
-
Hello everyone, When I opened my ARP 9 V2 gear box for the first time, I forgot to keep track of what shim goes where and on what bushing as I generally thought they were all the same size. Since opening the gear box I have lost a shim so I am only down to 4 when from the factory it comes with 5. On either side of the sector gear, also one on either side of the spur gear. And finally one on one side of the bevel gear. I know this question is a long shot but does anyone know what sizes of shims G&G uses from the factory on their ARP 9s and what size goes where? As I have ordered a pack of different size shims. (I have not adjusted the motor height from the factory) Many thanks
-
@ButcherBill x mas has been so I have abit haha and @MrTea thanks I will have a look.