taylors0226

VFC gen 3 hk416a5 gbbr 2x bolts: 1 steel 1 aluminium, both NPAS HOA SMR rail + attachments PTS slim stock VFC BCM pistol grip Deadair sandman K QD suppressor PM for more info price + shipping

here is my mk18 KOA longsword build i acquired late last year would very much like a swap for either a TM or VFC pattern AR15 gbbr (VFC version 3 or MWS) but will consider other trades PM me for build specs, MSRP on rifle alone is 1.5k for the gun alone, a repro RC2 suppressor, and the two black Pmags that work with the use of a laylax magazine adapter installed by me, (£20 new) im asking 550 for the gun mags and all attachments as seen in the images (other than tan magazines) im asking 700 for the gun all attachments and 7 + 1 boneyard VERY RARE PTS magpull Pmags im asking 900 POSTED attachments seen are: HW aimpoint T1 HW UNITY 2.23 micro riser HW UNITY 2.23 picatinny riser WADSN NGAL (needs repair) WADSN TAPS repro WADSN surefire M600V scout light w/pressure pad Dead air sandman-k repro suppressor unkown brand polymer front sight if you require any pictures ext drop me a message or if you care to question prices ext then same applies, i also have pictures of the trades on the PTS mags and the boneyard mag, as well as videos of the gun firing

PRICE DROP GHK m4 version one + mags + spares -maple leaf hummingbird bolt -titanium cerakote -angry gun rail system -HK E1 stock -4x LEAK FREE Gmags (with 3x genuine magpulls) -spare bolt nozzle -Mag speed loader adapter -handstop and muzzle device INCLUDED -real steel ergo grip, gouge trigger guard and selector switch -DMR rrp: 1100 Somebody needs to actually use this gun, unlike me £500 posted OPTIC: vector optics forester 1-5x with vector optics canterlever mount rrp: 120 with gun for £550 TOTAL

GHK M4 version 1 Fully functional, upgraded with real steel selector, ergo grip and houge trigger guard, What I think is an angry gun rail and a maple leaf hummingbird bolt for use all year round, incredibly snappy. Gun has titanium cerakote on the upper lower and buffer tube Four leak free mags, the PMAG “GMAG” versions. I listed this on here as two of them are leaking but I lubricated and left gas in them for a couple hours and they don’t leak at all now Vector optics forester 1-5 power and corresponding canter lever mount FPS is 420 on .2s, fire selector being RS is locked to semi, making it a DMR Asking £550 for gun and mags £450 for just the gun £600 for guns mags and optic DM me for any and all information and videos ext thank you very much for your time

GHK m4, beat up and scuffed hence the price. Has been converted back into a full rifle since my previous add and full travel bolt has been reinstalled. No hop rubber installed in the gun, however one will be included. All attachments seen are included. Has been tested and cycles on nuprol standard Green gas, for videos il have to buy some more as I used the last of it testing this build. Will include three mags for 320, will do just the gun for 250. Contact me for me information/pictures Thanks for looking

Once again listing my 6094 Real LBT, imported from the US, cost me £300 with taxes and delivery. Included is are WAS pouches, triple 5.56 bungee and the large GP. overall cost is ~400 plate bags have minor fluff but have 0 legitimate damages Ive come to learn that due to the fact I imported this it’s one of very few in the UK, perhaps below ten, I’ve never seen it be listed from anywhere other than myself. Asking £250, won’t go any lower due to condition and overall cost. Feel free to contact me on here or on my discord tag on the post

Selling my LCK105 zentico LCT B30/31 ZENTICO rail 5ku B22 ZENITCO riser mount ZCI high tourque motor comes with one battleaxe high cap magazine that struggles to feed, typical LCT issue, works perfect with LCT mags. optic is included, however is very tempromental. It’s a vector optics maverick, stops working after 4-5 shots or a big bump meaning that there is a loose connection inside. It’s fixable but I’ve not counted it onto the price as for all intents and purposes it’s aesthetic. Functionally the gun is sound, shoots perfectly and is bang on 325 FPS. There are two “problems” with it, Neither of them major. As you can see in the picture there is no fire selector. It’s literally a £5 fix, but I’ve been working none stop on my M4s, so this hasn’t been done and it’s therefore semi-locked for the time being. The second problem is that one of the screws is cross threaded on the rail, however it goes in and comes out fine and doesn’t effect the gun in anyway, it’s just courtesy to inform you. This is a £600+ retail build, I just don’t like AKs no more. Feel free to enquire either on here or on discord using the tag provided in the image Cheers for reading

Received this as part of a package deal, not what I’m interested in so selling it on Description from original seller: Virtually stock gun has got scratches ect on body as this rifle was a side project to make a pistol for cqb. Has a 3d printed plug fitted to lower but a buffertube and stock is included • maple hummingbird bolt • zci 6.02 inner • required hop rubber will include new red shark bucking Only alterations I’ve made have been the grip suppressor and fake Peq-15. Issues I’ve noticed are missing trigger guard and issue with spring on the charging handle latch, both minor fixes that don’t effect the performance of the gun Will include the stock buffer and stock spring allowing you to convert this back to a 10.3” rifle as apposed to a pistol Comes with three mags, the one pictured individually was stated to be leaky and have feed issues however from my testing it doesn’t leak and only has feed issues, which is a much easier fix. Not looking to split, Buyer ideally pays postage or can collect from S18 Cheers for your time

London Bridge trading 6094 low profile plate carrier, used for less than a year, looking to move to a different gear ecosystem. fitted with HRT two band molle cummerbund Comes with WAS pouch suite, Triple bungee mag pouch large GP pouch double pistol pouch and PRC152 radio pouch with minor bungee damage reproduction pouches include single fast mag pouch + repro dangler, both have 0 damages. Also Viper tactical shoulder pads harvested off a different carrier. All haven’t been changed as I’ve had 0 problems with each. two dummy hard sapi plates are included wear to carrier is minimal. Very easily cleaned up. Any grey dust like seen on the carrier/plates is from my last game day on Sunday which took place at Humber quarry. If you’ve played there you know what that’s about. Any misc items pictured are not included. postage is not included in price, asking for 400, open to reasonable offers

Old gen specna arms MK18 Only stock part left is gear box casing Purchased used due to my MK16 breaking on a field day, was only intended to be a temporary purchase Upgrades include Gate Titan advanced, fancy metal hop unit I have no idea of the name of but is in picture, ZCI 6.03 inner barrel, maple leaf hop rubber, High speed motor ext. Again, I didn’t build this one I just bought it off a buddy. An extremely snappy and consistently accurate gun (shooting 330 +-2fps on .2s) Looking to get rid as I already have a 10.3 gun and am looking for a longer rifle and don’t want to go through the pain of sourcing a new rail and matching outer barrel and would rather start with a new shell. Included is foregrip and suppressor, mag NGAL and optics are not included. Looking for 400 all in, can provide more images and videos of shooting if requested. Would trade for any 14.5 BCMs or 14.5 URGIs. Anything similar, you’re welcome to enquire.

My sordins have to go, this is a quick advert, if you’re interested message me and il post proof of possession MARKs are reproduction and are zip tied due to my FMA helmets rails being out of spec and too large, no fault of the mounts.

old reliable no brand black plate carrier First one I’ve seen that hasn’t destroyed itself from minor use Has been passed around loads and is holding strong, comes with all pictured pouches + custom backpack setup minor damages from wear otherwise in good condition £25 + postage

Viper tactical buckle up plate carrier modified specifically to be pretty much the universal airsoft plate carrier, basically new condition, only missing mag insert for buckle up chest rig (£5 off any airsoft website) Custom backpack set up Viper buckle up set (original bundle package bought separately due to discontinuation) Extras: Cummerbund with tubes (black): £10 Real steel LBT 6094 slick plate carrier elastic cummerbund (multicam): £10 ~250 msrp £120 + postage or collection from Dronfield

OD plate carrier and belt set up very minor damage to plate carrie and bungee on the 5+2p pouch, otherwise could do with a clean/tidy up and it’s basically new. Everything pictured is included, feel free to enquire. £99 for the lot, ~180 msrp

This was the last carrier I used before going into RS gear For airsoft purposes this is the pinnacle of cost/performance gear. I paid 250 for all that is seen + misc extras that can be thrown in if requested. Never had any issues with this carrier, custom attached the back pack as it is generally better than the viper tactical option, this one was originally 8 fields. Sits snug to your body and thanks to the padded construction is comfortable and rigid without dummy plates. Removed the shoulder pads upon first purchasing the plate carrier as I found them to make it actually less comfortable, since have been repurposed along with the triple magazine insert for the chest rig for use on my LBT 6094, they are not included however if desired can be sourced from 9/10 airsoft retailers for literally dirt cheap. included is: Viper tactical buckle up plate carrier Viper tactical wings Viper buckle up rig Viper dangler Viper tan elastic cummerbund 8Fields collapsible backpack Original viper Molle cummerbund Extras: misc cummerbund with tubes - £10 REAL STEEL LBT slick plate carrier elastic cummerbund - £15 looking for 140 based on condition being basically undamaged along with attachemente ext. Welcome to offers and feel free to ask any questions