Ares amoeba upper / lower front rail, outer barrel, flash hider, buffer tube, drop stock bracket and specna arms gearbox housing, gears, cylinder and piston. Comes with eject door and cocking handle. Was going to build up but not got time and want to snipe instead. £45 all in posted.
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
For sale
As new
TTI Airsoft TDC Hop Up £45 including postage and a set of barrel stabilisers new.
Suitable for Tokyo Marui VSR-10 Series Airsoft Sniper and any VSR 10 compatible action army etc
High quality CNC aluminum construction
TDC "Top Down Center" design applies even, concentrated pressure on the BB
A ready-made solution to increase the accuracy of your sniper
Weight : Approx 175g
Material : Aluminum
Color : Red
Model No : TTI-S0006. Used for one skirmish day but converted to TRIDOS for Hpa
For sale
Classic army nemesis LS12
Full modified up to run DMR
Classic army nemesis ls12 13.5” outer and inner barrel.
ZCI stainless steel 6.02 tight bore barrel
Specna arms full steel upper and lower receiver Classic army LS12 gearbox casing new 10mm bearings
Classic army pre cocking mosfet
Classic army nemesis gear set
FPS composite steel rack piston with AOE mod. FPS POM piston head
Ultimate ribbed cylinder
SHS cylinder head twin seal
SHS nozzle twin seal
Classic army flat trigger
ZCI 135 spring
Brand new classic army hop unit slim topped Maple leaf bucking
Omega nub
Classic army ultimate torque motor
New internal gearbox spring set
New buffer tube
New MOE stock
4x optical scope
Shooting 436 on 0.2s so bang on the money straight as a dye
Deans connection converted Comes with 1x11.1v Lipo
2 x high cap magazines
Any questions drop me a message
Can also post but happy to meet around YO25 area
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
For sale
As new
MANCRAFT SDIK sniper Hpa kit for vsr 10 comparable models. Fitted to my action army t10 for 1 match but now moving to DMR. Comes with everything needed including Valken 0.4 bottle, 4mm line, on off valve, and balystik regulator. Cost over £250 a month ago. Take £200 ono.
SDIK - Sniper Drop in Kit - a set of components which allows converting a spring rifle into gas-powered rifle. It is cheap and very effective method to upgrade.
The entire structure was designed from the ground up - as evidenced by the patent issued. The Conversion Kit is based on a simple and effective system of gas supply that is reliable and durable.
With proper construction and materials, the mechanism does not burden other components of a gun - they may be standard (e.g., the trigger assembly, cylinder etc). Rifle can be reloaded with one finger - overcharging is very smooth.
By using an appropriate regulator it is possible to obtain very stable (+ /-3fps), satisfactory fps.
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
For sale
Used
For sale.
bundle of parts
Taiwan upper and lower receiver both new needs front pin hole drilling to suit as a bit tight. New never used. Comes with Specna 7 in rail and mounting lock ring and mock silencer. No outer barrel.
E&C upper and lower receiver. Upper is nee but lower is cracked around the rear pin mount. Comes with 13” commando type front end with all mounts, lock ring and outer barrel.
2 brass inner barrels to suit.
1 Tokyo Marui custom motor used
1 brass cylinder cylinder head and piston
1 prowling CNC hopup. Machined on top to fit classic army barrel so only uses barrel spring to push back to gearbox. New and never used.
all in job lot of parts.
£75 or nearest offer
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
For sale or swap
Used
Full vest with magazine slots, pockets and hydro pack sized backpack. Used but great condition. £20
miltec goggles, used but good condition, few minor scratches but not is vision £10
face mask. Used for 1 skirmish as new £7.50.
any questions WhatsApp me on
+44 7385 399832
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
For sale
Used
For sale spare parts
Stock and buffer £10
Stock without buffer £7.50
New tight bore barrel 375mm with used outer barrel £25
7” Handguard and lock ring £15
Classic army nemesis upper receiver £15
any questions WhatsApp me on
+44 7385 399832
For sale ICS m4 commando.
has just been strip rebuilt to replace the plastic piston.
upgraded with non linear spring m110
Upgraded knight industries front hand guard
Upgraded steel rack piston.
all checked rebuilt and serviced while upgrading.
comes with 9.6v Nicad battery but will need a peq as battery doesn’t go behind the upgraded Handguard
upgraded adjustable stock
Will include battery and high cap magazine
looking for £125
Amazing straight and long distance. Selling as bought a specna cqb
also supplied with old school front hand guard for battery insertion.
+44 7385 399832 WhatsApp for more pictures or details
For sale brand new still with box. ( removed from packaging and test fired ). Lancer tactical LT-15 M4 AEG. Bought a month ago but not used comes with
trigger switch torch and strobe
red dot sight
3 magazines
2 batteries
original iron sights
was blue on black but hand guard and stock sprayed black on black.
has been setup and is a nice smooth action and really nice and light rif. payed £179 plus postage without torch and red dot but with the extra mags and batteries.
looking for £160 Ono
thanks
+44 7385 399832 WhatsApp me for more pictures or details
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
Wanted
Used or as new
Looking for an upper and lower receiver set in metal for an M4 anything considered to get me back up and running. Prefer threaded buffer lower receiver but can always get a screwed tube.
drop me a message with what’s available