GStar

I have done this and found out that the negative wire cuts off at a certain postion (when pushed down the gearbox). For some reason the disconnection happens just below the spade connector. So I had to crimp a new connector and soder it. Thanks It should be an easy fix but by Murphy's Law I made a stupid mistake. I turn the motor on outside the pistol grip and all went to hell it spins so fast and hard that it broke the wires. So I went to game day with dual pistols, I was planning to john wick it but some good soul let me borrowed his M249, had fun with it but my arms are dead after. Now im after a good wiring. I was using the wire that came with the mosfet and the old wires. its a good excuse now to change it.

To add. I tried a different motor and exactly the same. So the motor problem can be ruled out.

So I have this scar-L from cybergun. I pretty much change everything. Zci gears/motor, shs piston/head/cylinder/head nozzle etc Perun AB++ mosfet It happened before but it fixed itself I didnt bother to find out whats the problem . All was working fine until I decided to get a new bucking unit (maxx unit) it doesnt fit so i had to custom fit it. It has feeding issues but I managed to fix it. The hop unit was moving after each fire, I put a lot of orings to stop in moving forward and backward. Semi auto is fine. Then i tried full auto then it stopped. (The mosfet has yellow lights that blinks that says the motor is not connected. It turns green and make a beep sound if everything is in order) I opened the motor and check the connections and they are all fine. But when I close it the yellow lights blink when i connect it to the battery. Or even just pushing it without the cover. Now when I leave it open theres the green light and the beep, the motor works. VID_20220218_170127.mp4 Im completely lost to whats the problem is. It might be the gears inside but i want to avoid disassembling everything if there is an easy fix. Thanks for reading.

Im fairly new to airsoft, for the longest time ive been using my scar-L. Im mostly playing in the fields. So far I installed a perun mosfet and shim the gears 16:1 and im using a 11.1v li-on titan and sometimes I use a diy 7.4v li-on (2x sony VTC6 18650) and everything else is stock. I want to change the motor to something like lonex a1 but is it worth it? Thanks