CallumT20
-
Posts
45 -
Joined
-
Last visited
-
Feedback
100%
1 Follower
.thumb.jpg.dab09657d2166d19820b89b2c4970880.jpg)
Recent Profile Visitors
2,690 profile views
CallumT20's Achievements
-
Time Left: 6 days and 15 hours
- For sale
- As new
Two unused mags didn't fit in my TM Hi capa but fit fine in my WE. Sold the gun just after I bought these so they've been stored since. both magazines hold gas. £30 for both, postage and fees included.£30
-
Time Left: 6 days and 15 hours
- For sale
- Used
Have owned this for over a year, mainly used for garden plinking and general badassery. Magazine holds gas and functions as it should. Minor damage by the hammer on the left side where a piece of plastic has come off but doesn't effect function. Other than that the gun has moderate wear on the slide but that's about it. Unsure of what FPS, haven't actually used it in a skirmish so have never felt a need to chrono it. I assume with it being NBB it'll be entirely gas-dependent. £40 postage and fees included.£40
Nottingham - GB
-
This advert is COMPLETED!
- For sale
- As new
Unsure of what brand these magazines are unfortunately. My father bought these for me around 15 years ago when I had an ASG M1 carbine and found out that they wouldn't fit. At the time the King arms M1 wasn't around so have no idea what these are. One of them holds gas and the other hasn't been tested. Other than that they've got a bit of age to them as they've been sat in a loft and gone through 3 house moves in that time! Selling both of them for £30 quid, if they work in your king arms then you've got some cheap mags! if not then, they might need a little maintenance 👍 Postage included in the price.£30
- GB
-
Time Left: 6 days and 15 hours
- For sale
- As new
Selling this as I've got a VFC M727 which I prefer using and don't go enough to warrant a back up gun. Purchased around 2 months ago and haven't skirmished with it so it's new condition. The only downside is I've attempted to remove the Specna sticker off the side (poorly) and so half of it remains. Other than that all I've done is add a picatinny handguard, fake acog, functional peq box, and a sling. The rail system is plastic and is mainly there for looks. Also pictured are 4 specna stanag mid caps and the two plastic mid caps. Currently the gun is set to semi and 3 round burst but will include the HAL etu card with the gun or can print off another one. Changing the fire modes is quite easy and AST Kilo on youtube does a great demonstration on how to do it. The gun was chronoed at 347fps on a 0.2 at the time of purchase. Everything pictured is included in the sale, bear in mind I might have to send this over two parcels so postage is a little higher than usual (around 18£) £220 posted or collection can be arranged from Nottingham for £200. Any more questions don't hesitate to message me. Note this is a sale only and will not do a swap deal or anything like that 👍£220
Nottingham, Please select a region, state or province. - GB
-
Galvatron reacted to a question on an advert:
Tokyo Marui M4A1 MWS GBBR Z Sistem
-
You have this for £650 on used airsoft. Why is it £750 on here? -
CallumT20 reacted to a question on an advert:
Tokyo Marui M4A1 MWS GBBR Z Sistem
-
CallumT20 reacted to a post in a topic:
VFC NPAS bolt
-
Evening all, would a V2 NPAS bolt, the one linked below, fit in a V3 VFC gun, just got a M727 and wanted to be able to adjust the power on it as the one i've got is the japanese low power bolt. https://highpressureairsoft.co.uk/products/vfc-m4-gbbr-m4-gbbr-zinc-bolt-set-v2-npas-1 Any help would be appreciated 👍
-
This advert is COMPLETED!
- For sale
- Used
Selling this to make room for more gats that I'll never use. Have owned this for just over a year and have used it once at an outdoor event. Since then it's been sat in the locker. The gun is in good condition, unfortunately, there is some surface rust on the fire selector and a few of the pins, I tried to picture it the best I could but the lighting in my room isn't the greatest. This seems to be a common issue with these as a friend of mine owns the full-length version and his fire selector is also a tad rusty. The gun is completely stock and could do with a new hop rubber, I've found it can hop .2's and just about .25s. Anything heavier and it starts to struggle past 40 meters. It could be a case that the nub just isn't applying enough pressure on the bb. If you're happy with using 0.2's then you won't have a problem but it's not 2009 anymore so I don't think any of you still use them! I've stuck on a regular AK-74 style flash hider as I didn't like the sound that the sound-hog style one makes. I'll include it with the gun anyway. The follower on the original magazine broke basically immediately which was my fault, that magazine is long gone but I'll include a regular AKM mag which fits and feeds just fine. The gun uses mini Tamiya and the battery sits in the front handguard, it's a tight squeeze so a nunchuck style 11.1 lipo will be the best for it. Other than that the gun feels great in the hand, isn't overly heavy and looks pretty good! £160 postage and fees included. £140 for collection from NG14. Thanks for reading!£160
-
This advert is COMPLETED!
- For sale
- Used
Selling this as I prefer my long guns. Got this just under a year ago from PB and haven't used it for an actual skirmish yet. Fired a few shots in the garden with it and then put it back in the box. Condition wise it's basically new and free of any marks or blemishes. I'll include the mid cap that came with it along with the original box. I had bought some cheap plastic mid caps but unfortunately they don't fit, if you want i'll include them. They might just need a bit of tape around the top to make them a bit more snug in the magwell. Not much else to say really, the gun fires well and has the hop behind the bolt rather than on the handguard like TM's etc. Has a good rate of fire in full auto on a 7.4 and is nice and snappy. £190 postage and fees included, pick up in the NG14 area for £170 Thanks for reading.£190
-
This advert is COMPLETED!
- For sale
- Used
Selling my RDB as it's not getting any use and is taking up precious space in the cupboard. I've owned this from new and have skirmished with it around 6 times, has had the hop up rubber replaced but unfortunately I don't know the brand of the replacement. The gun itself is in good condition and is mainly free of scratches or blemishes. The slings loops have some slight wear which I've tried to show in the above photos. I've found it works with most M4 mags, the mags that came with it were trash so have just used cheap mid caps with it since and have had no issues with feeding. I'll include the iron sights as the gun came with nothing. The gun is wired to deans and you just need to pop a pin out on the handguard and it sits in there, a 7.4 1300mah stick type is usually the best fit. The only downside is that I've also lost the hop adjustment tool (yes it has one) located in the pistol grip (was). The hop is just infront of the magwell on the under side of the gun and a narrow screwdriver is just as effective. I'll chuck in a bog standard mid cap, hopefully if you're buying this you have plenty of M4 mags already. Postage and fees included in the price, if you want to collect I'm in the NG14 area and will knock the price down to £165, otherwise posted for £180.£180
-
Could you add todays date to it? you've got a date from 3 years ago -
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used
Just testing the water here and seeing if anyone would be willing to part ways with any old bullpup rifles, preferably a Famas but I am open to most things bar army armament augs. I've got around £150 but open to adjustments depending on what you have. Thanks for reading 👍£150
-
This advert is COMPLETED!
- For sale
- Used
Evening all, selling this old piece from my collection. I've owned this for 15 years and have used it a few times as a backup to a backup gun so it's mainly just been holstered most of the time. The gun has a fair few scratches on it but no major cracks or damage and still functions as well and the magazine even holds gas! Just listing it as boneyard as it's a 15-year-old gun. It could do with a clean on the outside and probably needs to be stripped and cleaned internally. I think it was last cleaned around 8 years ago so the slide feels a bit sticky but it doesn't effect function. Unfortunately, the box was lost many years ago but can still be posted. Last time I chrono'd this it was around 260fps with green gas but it was a cold day so may change depending on weather etc. This would make a nice wall hanger as I believe they're pretty hard to find these days. I don't think it's compatible with WE P99c magazines either. £60 posted with postage included (PF48 is a tenner so £50 for the gun seems fair) Any more questions just drop me a message£60
-
This advert is COMPLETED!
- For sale
- Used
I've recently moved away from collecting airsoft so I'm selling up most of my stuff, here we have a TM M29, the Dirty Harry special. bought this recently and have taken it out of the box a couple of times to oggle at it and quote Dirty Harry etc. Other than that it's untouched. The gun itself is boneyard, the cylinder still locks in but each chamber is missing its spring which would hold the bb's in. I only have 4 of the springs, so if you wanted to complete the set, you would need to source two of them. the side plate on the right side of the gun has come away a tiny bit as well and I'm not sure what retains it as it doesn't seem to be missing any screws. I do have the original box and the red velvet lining for it still so that's a bonus. The tank still holds gas and the gun is still in good condition externally. £40 postage included, will send via PF48.£40
-
This advert is COMPLETED!
- For sale
- Used
I've recently moved away from collecting airsoft so I'm selling up most of my stuff, here we have a UHC M29 with an 8 Inch Barrel, the pistol is entirely plastic, so be careful with it! Looks really nice and sits well in the hand. I was genuinely surprised shooting this as I put a 0.20 in it expecting it to fire maybe 10-15 meters and it easily cleared 30 whilst still applying hop. 0.28 seems to be its preferred food and had some good fun plinking cans at 25 meters. I probably wouldn't risk taking this to a skirmish as it is relatively fragile. Gas tank is leak free and it comes with 7 shells. I also have the original box, it's a bit tatty but I can apply some tape to it for transit to keep everything safe. I did Chrono this but it was around 2 degrees and I was using low-power gas so I got a reading of 260, this will change depending on the weather and gas used. £35 including postage via PF48,£35
-
This advert is COMPLETED!
- For sale
- As new
I've recently moved away from collecting airsoft so I'm selling up most of my stuff, here we have a King Arms Colt Python which is essentially a display piece, I'm not the first owner but since i've owned it, it's always lived on the desk or in the cupboard in it's bag. The gun comes with 5 shells (only came with 5) and the king arms bag. Unfortunately, the box was discarded so I'll have to ship it in another pistol box. The gun itself is full metal and quite heavy and feels solid in the hand. Performance-wise, it doesn't. I didn't bother chrono'ing it because I reckon it's sub 200 FPS, maybe 150 maximum. You could probably use it at CQB as a meme weapon as long as you're shooting at something within 15 feet. The gun is leak free as well which is a bonus. £60 postage included, will be sent via PF48, give me a few days to post as I struggle sometimes to make it the P.O before it closes but i'll provide updates etc.£60
