Trashpanda
-
Posts
45 -
Joined
-
Last visited
-
Feedback
100%
Trashpanda's Achievements
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Invader Gear Revenger tactical shirt in Flecktarn. In XXL Two Breast Pockets Two Angled Arm Pockets Mandarin-collar can be worn up or down. Barely used in very good condition. 25 plus post if required£25
Corby, Northamptonshire - GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Viper elite molle battle belt in OD green with Viper locking harness. Fully adjustable, up to 52" waist Excellent for any kind of loadout. More images available if needed. 40 plus post if required.£40
- GB
-
Trashpanda reacted to a post in a topic:
Mosfets and LMGS...
-
Yes I have heard the stories on the reciever which is why I'm currently reinforcing it along with the other work, the bipod however is long gone replaced it with one from a mg3 after it sheared off its mounting point leaving it behind in the reciever thing had the rigidity of a chocolate fireguard :D. Also I'd love to HPA too but sadly my piggy bank isn't currently large enough for that haha.
-
Trashpanda reacted to a post in a topic:
Mosfets and LMGS...
-
I'm looking into the Gate ones now yes came across the x asr will take a look at the one you mentioned too, plan on wiring it to the trigger connector too so that's good to know. To answer your question it is the AGM mg42 yes and I don't plan on wiring the winder in as the motor is not the best like you mentioned. I've spent quite some time staring at it when I had to repair and protect the wiring haha. I'm also looking at upgrading the spring but not to sure what to go with.
-
Nick G reacted to a post in a topic:
Mosfets and LMGS...
-
Will give it a look, cheers.🤙
-
Nick G reacted to a post in a topic:
Mosfets and LMGS...
-
Morning all, Apologies if this is already a thread, I am looking at fitting a mosftet to my ongoing project mg42 as I already have it open for other maintenance the thought struck me. I'm guessing it will only need a simple variation/model as it only has full auto, but I am a newcomer to the mosfets and this will be the first I fit ideally looking for a drop in kit, then possibly look for a more advanced mosftet for my JG G36 in the future depending on how well it goes. I am confident in soldering wiring etc just looking for a drop kit to make it a bit easier. If anybody has any recommendations it would be greatly appreciated. Thanks in advance.
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Brand new only taken out for picture purposes. Vcam one point. £18 all in.£18
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Never used new with smoke lens insert and carry case. £28 Inc post£28
-
This advert is COMPLETED!
- For sale
- As new
Micro Red dot sight. Red reticule 11 modes of brightness. Only used once, so basically brand new. Fits 20mm rails. £20 plus postage.£20
Corby, Northamptonshire - GB
-
This advert is COMPLETED!
- For sale
- As new
Only used once, basically brand new. £15 plus post£15
-
Trashpanda reacted to a post in a topic:
Looking for advice.
-
I own an agm mg42, and after purchasing it knew that at some point I wanted to HPA it. Well now I'm sick to my back teeth of all the teething problems and repairs that come with the aeg as I'm sure some of you are aware of. So I've decided that I'm just going to do it now, issue I'm having is that I'm completely new to the world of HPA, so if anyone can give me some tips in regards to what I'd need, or if any kits etc exist. And if anyone here has actually done it themselves. Any help will be greatly appreciated
-
This advert is COMPLETED!
- For sale
- Used
CYMA CM350 M870 tri shot spring Shotgun Only used once, basically brand new. Full Length Design CM.350 Alloy Variant Pump Action Tri-Shot Shotgun comes with: 7 Cyma 30 round shotgun cartridges. Speed loader Viper VX sling in Vcam Black Torch mounted on barrel for cqb etc. More images to be uploaded. £95 Inc postage.£90
Corby, Northamptonshire - GB
-
Hello all, I own an agm mg42, and after purchasing it knew that at some point I wanted to HPA it. Well now I'm sick to my back teeth of all the teething problems and repairs that come with the aeg as I'm sure some of you are aware of. So I've decided that I'm just going to do it now, issue I'm having is that I'm completely new to the world of HPA, so if anyone can give me some tips in regards to what I'd need, or if any kits etc exist. And if anyone here has actually done it themselves. Any help will be greatly appreciated
-
This advert is COMPLETED!
- For sale
- Used
Tactical MOD Bladder Pouch 1.5ltr Olive Green. 1.5 Litre Bladder Kink Resistant Tube On/Off Tap for Hose £18 all in£18
Oakham, Rutland - GB
-
This advert is COMPLETED!
- For sale
- Used
Cybergun FN Herstal Scar L sportline. Polymer construction with some real metal add ons such as bottom rail and front iron sights. Foregrip is included Muzzle will be reattached before sending as I removed the Silencer before taking the images. Also included x3 mid cap m4 magazines and x5 high cap m4 magazines. Great lightweight style gun that has barely seen the field as I decided to change up my load out. Barely used. Lightweight. £155 + postage£155
Corby, Northamptonshire - GB
