Hobbnob
-
Posts
39 -
Joined
-
Last visited
-
Days Won
3 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Hobbnob
-
Time Left: 2 days and 14 minutes
- For sale
- As new
Previous buyer has gone silent so I'm listing for open sale. Evolution Gear Sig Tango 6T DVO. You can find out a lot about this optic online as it has a very good reputation and punches well above its weight. However, this one has never been used because I happened to get a good deal on a Vortex Razor while waiting for this to be delivered. Selling with the rare mount repro that mysteriously only saw a single production run (legal troubles most likely) I have checked this over for warp, edge and edge to edge clarity, chromatic aberration, contrast, colour reproduction and light transmission, eye relief shift with zoom, eyebox and diopter range. For all intents and purposes, this outranks much more expensive scopes for optical quality and I would keep it if not for the Vortex beating it for bezel and warranty. Action is first focal plane, meaning that zooming in the image will also zoom in the reticle. The reticle also has illumination which is functioning perfectly as expected. On 1x the reticle is so small that illuminating it turns it into a precise red dot. Battery is 1x CR2032 and will be included. Turrets are capped, weather sealed, nonlocking with tactile clicks in 0.2mrad increments Power wheel is smooth throughout and perfect stiffness. Throw lever is fitted and tightened, there is no wobble or other movement. All markings are clear and correct with no damage. Lens caps are clone correct and have their markings. Fitment is tight and without wobble or shift. Tracked postage included, happy to use Paypal G&S£230
-
Time Left: 5 days and 8 hours
- For sale
- As new
Original WE OEM L85A2 Handguard Used once, now I've converted to an L86 build Includes fixing screw but not the receiver backplate that spaces between the receiver and the handguard, so this would probably be most beneficial to someone wanting a spare for modding Price includes postage, Paypal G&S welcome£20
-
Nova kit MWS with the fancy rare VFC OPS suppressor, genuine Aimpoint Comp M2 and some other goodies
-
This advert is COMPLETED!
- For sale
- As new
I believe this is a classic army rear sight. No slop or wobble in the elevation and windage adjustments and it locks onto the receiver with no issues. Postage included, Paypal G&S welcome£15
-
This advert is COMPLETED!
- Wanted
- Used or as new
Looking to buy a stock MWS charging handle as my one has broken its latch Used or new is fine, just looking for a standard M4 style one though£1
-
MWS MK12 Mod 0. It has the carbon fiber handguard but it's still kinda heavy lol
-
Tbh the most likely suspect is AliExpress. I have one of the same and it has the same colouring (the fsp colouring seems better than the flattops tbh) and the same spacing at the front end. Pricing new would be about 40 I believe but I'd recommend having a little look around yourself just to get a first hand impression -
Block 2 nerd here, afaik madbull didn't make an fsp ris2 btw, just the omega fsp. The main suspects are the emg, the ghk and the vfc but these do their front top pic sections more like the real one. This has the incorrect sections which make it more likely to be a cheaper clone
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
On the hunt for a madbull MK18 rail in FDE, pics would be appreciated if you have one available, postage would be to KentNO VALUE SPECIFIED
-
Dodgy delivery is the seller's problem, refund the buyer first and then handle your business if you know that the package is lost
-
I love boneyard listings sometimes, the thing is a periscope but defcon has the cheek to try listing it, and for only 20 quid less than RRP! "Slight bend" yeah right XD
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Discovery Optics VT-R 3-12X40 SF Rifle Scope. Selling as I've upgraded to a Vortex Viper. Uncapped, lockable turrets at 1/4 MOA increments 30mm tube, 40mm objective. Great for MK12 cloners or just as an upgrade to the ultra cheap Amazon scopes. Body is light for its size and free of marks, blemishes or scratches. Eye relief: 3 inches. This is slightly shorter than average for a precision scope, and with a small bevel it gives a much larger FOV per zoom than other scopes of this type, it's like looking at a big screen as opposed to through a bog roll tube Eyebox: gets tight at the top end as expected, but usable throughout. Clarity: better than you would expect at the price point. Colour, contrast and light transmission are also great. Glass is free of scratches, marks etc. Diopter adjustment is functional, as is side focus. All adjustment dials are smooth and fluid, with no hitches or excess friction. Elevation and windage turrets are clicky and tactile. Can include cheap low rings for free if required Price includes postage from Kent, PayPal G&S preferred£60
-
Thanks! The essentials for the M16 are: G&P 20" steel WA system outer barrel, with unknown brand WA-MWS adapter G&P front end furniture (M203 heatshield, M5 RAS, I have a standard A2 handguard too but not sure who that's from) I believe this is a DNA barrel nut, it's definitely not the normal TM one. The person I bought the nut from among other things mentioned that the 203 won't work with the standard barrel nut, it seems like that screw gets in the way MWC Stock kit. These are built to MWS spec and have large spacers inside, so you can use a carbine buffer inside rather than having to switch out to a rifle length buffer. No weight difference, just saves a bit of faff when finding parts The 203 is believed to be a king arms, I have a G&P as well and consider the king arms superior because the tube rails have a detent at the end of travel so it holds open as long as you want it The ACOG is holy warrior, I'm not sold on it currently compared to the G&P repro I used to have but I also don't have enough time with it to say for certain. I don't believe the UID is correct for an A4 of this era, but this receiver gets passed around a lot of builds and it links to a google doc with info such as current chrono/npas setting, what the hop is set for, whether it's had any recent issues to keep an eye out for etc I'm a fan of the MK12 but I have a VFC M110 for my quad rail DMR fix, I still want a mod 0 though at some point XD Angry gun are not that bad but you really have to temper your expectations, if it's something with threads or any precise machining like a bolt then you have to understand they don't have a great sucess rate. Stick to simple things like buffers though and they're fine, and I've seen angry gun bolts that lasted almost a whole day before as well. It was broken by lunchtime but the fact it actually fit in the gun, didn't break itself apart when testing at home, got through chrono and then played a couple hours of games is quite impressive for angry gun. Fwiw I've heard that their receiver/front end kits can be workable too if you're alright with a dremel, but I wouldn't personally chance it
-
Thanks! They used to be unicorns but there was actually a point a year or two ago that it was possible to build one, I'm very lucky to be benefitting from that (Edit: unless you use angry gun, but everyone should know how that will go ) I'm thinking of doing a C7 or MK12 Mod 0 build at some point in future but it'll be a while before parts availability and budget lines up
-
A couple of my MWS's, top is a colt 723 with a Nova receiver, VFC Ops Inc suppressor and a few other bits and pieces for a 90's delta build, and the second is an M16A4 as seen in its transitional era during the Iraq war
-
This advert is COMPLETED!
- For sale
- Used
WE Desert Eagle, gamed it once but I prefer the more mainstream stuff so this hasn't been used enough since buying it last year Comes with 1 gas magazine, I have 2 other gas mags that I can sell for £10 each, will not be selling them separately until the gun is gone. I also have 1 co2 magazine that I'll sell for the same deal, FPS between the co2 and the green gas mags is about the same, and the co2 mag FPS is generally a bit lower than red gas. Co2 mag will come with the relevant Allen key for it. Gun has modified safety catch to remove slack that these come with from factory, and has also had it's hop adjustment screw smoothed out at the tip to prevent it wearing a groove into the hop arm and degrading hop performance over time Gun has also had it's mag catch modified with a new entry geometry, the OEM geometry is crap and mags will not go in smoothly unless this modification is made. Gun has slight marks on the top rail where I briefly mounted a scope, this is visible in the pics Gun can come with amomax holster for £10, with either an Israeli military low/mid/high belt mount or an amomax paddle, or both for an extra £5 Postage included, PayPal G&S preferred£100
Chatham, Kent - GB
-
aliexpress can be a great resource and it can often be worth taking a chance on these things, but if there are no decent reviews with text and pictures then be prepared to be surprised at how badly something can be made. You'll see missing screws, miscast screws (allen heads with the heads filled in can be pretty common), parts not lining up and dodgy anodizing. This is especially common with any kind of mounts in particular because they'll try to do an rmr footprint without having an rmr or a picatinny attachment without testing on a rail. It can be a good experience, just bear in mind that it's a bit of a gamble
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Originally on an Arthurian MK18, this is a reproduction of the b5 sopmod stock that is issued with MK18's Colour is not the overly bright FDE that some companies use, this is the proper colour that's not as saturated as coyote but not as bright as some FDE's All in working order, no scratches or cracks. This is the version with the compartments either side for nunchuck batteries Postage included PayPal G&S preferred, but if you happen to have one of those piggyback mounts for a Specter that has 20mm rather than an optic footprint then I'd be happy to discuss a swap£15
-
That's an unusual issue, and tricky because anything with enough protection will build heat, and then you have sweat issues which may also cause aggravation. Usually I'd recommend delta mike, but for extra cheek and nose protection I would instead recommend this: https://www.patrolbase.co.uk/nuprol-mask-6-tactical-half-face-mask By default it will come with foam in the cheek lining, but you can make a slit in the bottom and pull these inserts out as they will not contribute much other than heat This will also cover your nose, and the material in contact with your face is normal fabric rather than the metal mesh, which should stand away from your face a little For the forehead I would think about hats or helmet, there are enough options there that will work, it's just a case of keeping the heat down
-
This advert is COMPLETED!
- For sale
- Used
Bought this from a collector but never got round to using it. There were a couple of these available in the UK around 2015-2016 ish but otherwise they're rarely produced and even more rare to find in the UK. Kyairsoft unfortunately has false stock info. The non-k variants are still produced and are being sold in the UK for silly prices, often around £600 Everything here works fine, steel receiver and solid build quality. I just prefer my full size MP5 because it has a stock. Gun comes with one of the short mags which is fully working, as well as the original box. Gun has semi, 3rnd burst and auto. Sears for each are in working order Gun has very obviously never had an optic mounted on it, it has no scratches at all in the claw areas Postage included, PayPal G&S preferred Pickup not available due to nosy neighbours and nervous pets£250
-
This advert is COMPLETED!
- For sale
- As new
All unused, I bought this as a set with a handguard and only wanted the handguard. Outer barrel is 14.5" with the standard VFC length 10" inner barrel. All parts are OEM. Hop system is adjustable from the gas block Does not include bolt, charging handle or barrel nut £150 via PayPal G&S, postage included£150
-
This advert is COMPLETED!
- For sale
- Used
I love this scope to bits but I've actually just bought another one new as I wanted to see if Holy Warrior is as good as they say (it kinda isn't really an improvement lol) This is an EG Specter with the dual role switching between 1x and 4x. Its about a year old with a few dents and scrapes, but it has held zero without issue and was regularly used on GBBR's with no problems. It comes with a scope protector built in, this is a sheet of 2mm polycarbonate that I have cut to fit inside the front shroud. This is barely visible and makes no difference to the image quality, and can be seen in the pictures of the front of the scope £100 includes postage and PayPal G&S fees£100
-
Made a bracket out of aluminium for the 203 to fit on the MWS barrel
-
This advert is COMPLETED!
- For sale
- As new
Genuine Vortex Strike Eagle variable scope, with Sotac RMR, repro geissele cantilever mount and kit for mounting the RMR or just the standalone scope. Real do-it-all piece of kit and with the crazy warranty that Vortex are known for. This is the second generation version with the improvements to the adjustment lever and the 8x maximum zoom range. The turrets are capped and tool-free, and have zeroing markers. Reticle is AR-BDC3, second focal plane with illumination from a CR2032 battery which is included. RMR is a single dot from an included CR2032 battery. This has been used for a couple of games but has no scratches or any other signs of wear. I'm only selling as I don't find myself using my M4 that much these days A new one of these will cost 485 at the very least Postage included, Paypal G&S preferred£400
-
This advert is COMPLETED!
- For sale
- As new
C&C Tac Aluminium silver threaded outer barrel for the Tokyo Marui Glock 19 Barrel is one piece, not a barrel with an adapter Barrel is unused and unfitted, it came as part of a kit and I only wanted the other half of it Includes postage, paypal G&S preferred£30
- GB
