DannyZall

so new parts are in, works 100% now, the trigger is very stiff now and it cycles as normal so yes it is now working again

Think Ive sused it, the hammer is catching on the sear but due to the amount of wear instantly slips off im going to order a new hammer and sear (Stock WE stuff) and fit that should hopefully be good then

Hmm, not to sure bud, all that's happening is the hammer locks back and then instantly releases, the odd thing is if i take the pin around half out itll lock back so im honestly not to sure what's gone bang, if you want pictures ill take it apart and show you the wear on the parts it might help you out

I honestly don't mind replacing the part I can get the sear for a couple of quid, would it be worth upgrading the sear for a steel one?

Hammer won't lock back, basically it instantly releases the Hammer once it's cocked turns the gun full auto any ideas on what's gone caput? This is a WE g17 hammer unit 20220728_025055.mp4

Just read that thread honestly some good points made in there would you have a type of lube you'd recommend over just a base silicone oil?

8mm is the original size aswell

It's 8mm outer diameter I've currently got it out as I was trying to see if it was potentially the bearing that was giving up but the brand that made it is called SLONG

yeah i have its still same issue tho you want pics of it?

Thanks for trying dude

So i sanded it for a magwell fitment the gun was subsequently cleaned fully With isopropyl alcohol the whole gun every little pin to every little spring, The outer barrel is rated for WE (it's a hadron 3D printed outer)I have the same issue when i put the standard Hop unit and standard outer barrel in sorry about the pics my phone is a piece of shite if you need more specific shots let me know

What happened was i had to sand the frame down and the made the gun get full of crap i then took the whole thing apart and cleaned it in isopropyl alcohol (keep in mind it still squeaked before this cleaning) the gun was spotless after that i then applied silicone oil to the normal parts you'd put it and it still had the squeak. what else ive changed is the outer barrel, recoil spring and nozzle spring, Oh forgot to say the part i sanded was the magwell so nothing up top

2 dots on the top are just marking from the red dot screws i have, by roller bearing i mean a hammer wheel that is a roller bearing yes, The BBU is getting replaced as it has a literal hole in it, and yes your right it should squeak when you do that but it still squeaks when the slide is being racked so for example i leave the gun for an hour and rack it, it will squeak and will not stop almost as if its rubbing on the slide.

So to sum it up the top slide seems to be rubbing on something trigger related, I'm not to sure on where the sound is coming from this also seems to corolate with the sticky side I have atm it has a roller bearing and I'm going to replace it with an sfk on soon but I'm not sure why I'm having this issue, I've put pictures to where there is heavy wear on the slide I'm sort of assuming that has something to do with it, thanks for all of you who reply too 20220717_164753.mp4

Thanks for the advice dude and yeah I'm slowly starting to figure out that nuprol is basically just AliExpress minus the month wait lol