Jump to content

Salamanca

Members
  • Posts

    92
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by Salamanca

  1. This advert is COMPLETED!

    • For sale
    • Used

    Evolution Gear M5 Red Dot Sight, with 2 mounts. One standard height mount in tan, plus one 1.93 inch Unity mount(clone) Sight in perfect working order, but no lens caps. Come in case with lens cloth and 2 AAA batteries. Official spec: Advanced optical lenses for enhanced light transmission and ultimate dot clarity Reinforced protection of the turrets for even greater ruggedness Hard anodized non-reflective surface 10 brightness settings: 3 night vision compatible settings and 6 daylight settings 1X (non-magnifying) operationally parallax free optic £55 - inc fees and delivery.

    £55

    Crawley, State - GB

  2. I have cured MWS bolt-bounce with an Angry gun heavy buffer and a heavier spring. It seems a problem that some rifles suffer and some do not, as I have had this problem with just one of my rifles. You may be able to cure it with one of those buffer weights fitted with small weights inside, which I recall is what Ollie used.
  3. This advert is COMPLETED!

    • For sale
    • Used

    Tokyo Marui FNX45 Upgraded - Laylax 6.00mm power barrel, H-key and Flamingo bucking 3 gas tight mags, X300 light Deadly Customs light bearing holster Hard case. Shoots very well, hops .32s easily. £190 - inc fees and delivery.

    £190

    Crawley, West Sussex - GB

  4. This advert is COMPLETED!

    • For sale
    • Used

    TM MP7 GBBR with 6 x mags Upgraded with Laylax 6.03 stainless tight bore barrel, Eagle 6 nub and Gen3 Flamingo bucking. Very accurate can hop 0.36s out to 70m. Also fitted with the Laylax sling mount - crucial and not cheap. Comes with Aimpoint M5 Evolution Gear red dot sight - accurately zeroed. All mags are gas tight. Comes fitted with a mock suppressor which fits onto a 14mm CCW adaptor that can take any 14mm CCW muzzle device. I cant locate the original TM flash hider...if I do it will be included, but I cant guarantee. Shoots at 1.1 J (345fps) on 144a gas in the summer. Selling because I really need to size down my very large RIF collection. £450 inc fees and delivery.

    £450

    Crawley, West Sussex - GB

  5. This advert is COMPLETED!

    • For sale
    • Used

    Robin Hood steel bolt carrier for MWS - with 3 end weights. Included is: - Steel Bolt - Resin Weight - Light - Brass Weight - Heavy - Aluminium Weight - Medium Bolt total weights are when using each bolt end weight: Using TM Genuine bolt: 197g Using Brass Weight: 278g ( 141% compared to TM standard weight) Using Aluminum weight used: 213g (108% compared to TM standard weight) Using Resin weight used: 196g (99% compared to TM standard weight) Not much use. Bought for extra recoil but tend to use different buffer weights now. Normal cost £240 new from Eagle 6. Price includes PP fees and 24hr postage.

    £70

  6. This advert is COMPLETED!

    • For sale
    • Used

    Vortex Strikefire red/green dot sight With original box. Excellent used condition, will come complete with battery. Price includes Royal Mail 24hr tracked shipment and fees.

    £100

    Crawley, West Sussex - GB

  7. This advert is COMPLETED!

    • For sale
    • Used

    UTG 4.2 Inch ITA Red/Green T-Dot with QD Mount, Riser Adaptor Great Field of View, Unlimited Eye Relief, and Featuring a Non-reflective Emerald Coated Lens Optimal Height to Co-witness with Iron Sights Using Included Riser Adaptor Full details on the leapers website at: https://www.leapers.com/products-utg-scp-ds3840tdq.html As a real steel optic this holds zero on GBBR. Thinning out my collection at the moment, hence sale. These are just over £100 from Amazon. £55 inc Paypal fees and shipping - 24hr tracked.

    £55

  8. This advert is COMPLETED!

    • For sale
    • Used

    Evolution Gear TANGO 6T DVO 1-6X24mm FFP Illuminated LPVO Scope Complete with ALPHA4 Ultralight Mount Combo in FDE Hard to get in this country, this Evolution Gear clone is the best clone on the market. Barely used, complete in box with instructions, throw lever ring clamp (not fitted in bag) and hex keys etc. Thinning out my collection at the moment, hence sale. These are$270 plus shipping from the Far East normally. £190 inc Paypal fees and shipping - 24hr tracked.

    £189.99

    Crawley, England - GB

  9. This advert is COMPLETED!

    • For sale
    • As new

    LCT HK33 EBB - PROJECT NEEDS SORTING. ELECTRIC BLOWBACK. HAS BEEN UPGRADED WITH THE FOLLOWING; GATE TITAN, SHS GEARS, MAPLE LEAF 6.02MM TIGHTBORE BARREL MAPLE LEAF HOP RUBBER, AND OMEGA NUB. WIRED DEANS. IT STOPPED FIRING. CONNECTING IT TO THE LAPTOP PRODUCED THE ERROR CODE SHOWN IN PHOTO - IT APPEARS IT IS NOT DETECTING THE SECTOR GEAR OR HAS JAMMED. I AM INTO GBBR NOW, AND WILL NEVER GET ROUND TO SORTING IT, SO BEST GO TO A NEW HOME. COMES WITH THE FOLLOWING EXTRAS: 4 X MID CAP MAGS (RARE), 1 X HIGH CAP MAG. PICATINNY FRONT RAIL, AND A SPRING FOR DMR USE GIVING 1.7J (430FPS ON 0.20S). IT HAS A QUICK CHANGE SPRING SO TURNING IT INTO A DMR IS EASY. NORMALLY IT FIRES 1J (330FPS) ON 0.32s. PRICE INCLUDES FEES AND SHIPMENT. WILL BE SENT PARCEL FORCE 48HR.

    £190

    - GB

  10. This advert is COMPLETED!

    • For sale
    • As new

    Four mid cap 100 round LCT magazines for HK33 and HK53. Normally £40 each at Fire Support. Perfect as new condition, barely used. £105 inc delivery and Paypal fees.

    £120

  11. This advert is COMPLETED!

    • For sale
    • Used

    WADSN ROMEO5 red dot Sight Complete with clone Fortis mount. Perfect working condition, with lens covers and CR2032 battery installed. £40 inc delivery and Paypal fees.

    £40

  12. This advert is COMPLETED!

    • For sale
    • As new

    WADSN DBAL-Mini Aiming Device - Red/IR Laser - Black High quality aluminium construction. needs 1 x C123 batteries. As new , works perfectly. comes with remote switch. £110 new from Land Warrior normally. £50. Price inc delivery 24hr and paypal fees.

    £50

  13. This advert is COMPLETED!

    • For sale
    • Used

    WADSN IR/ White Scout Light Infra red and white light. Perfect working condition, painted but never actually used. needs 2 x C123 batteries. Comes with picatinny mount, single switch, and a WADSN dual switch for scout light and PEQ/NGAL etc. Price inc delivery 24hr and paypal fees.

    £30

  14. This advert is COMPLETED!

    • For sale
    • Used

    G&P Dual Laser Destinator and IR Illuminator. Dbal (Black) Metal construction, comes with mod button to fit picatinny rail and battery. The best airsoft DBAL on the market. Never gets used so best go to a new home. Perfect working condition, but has been painted as can be seen in pictures. Tech spec below. A) Output & mode switch 1. ON LO PWR-->Low power constant on 2. MOM LO PWR-->Low power momentary on 3. OFF-->Off 4. MOM HI PWR-->Hi power momentary on 5. ON HI PWR-->Hi power constant on B) Function switch 1. VIS POINT-->Visible pointer only 2. I/R ILLUM-->Infra-red illuminator only 3. I/R POINT & ILLUM-->Infra-red pointer and illumator 4. I/R POINT-->Infra-red pointer only Adjustable left/right and up/down £200 new from Fire Support. £75 INC PAYPAL FEES AND DELIVERY ROYAL MAIL 24HR TRACKED.

    £75

  15. This advert is COMPLETED!

    • For sale
    • Used

    GENUINE MAGPUL STR STOCK - MIL SPEC. PERFECT CONDITION IN ORIGINAL BOX. £50 INC PAYPAL FEES AND DELIVERY ROYAL MAIL 24HR TRACKED.

    £50

  16. I have found p mags slow to fill, some more than others. What I do is heat the gas cannisters first by putting them on a radiator for a short while to increase internal pressure. If the cannisters are half full this is essential as the pressure is too low to over come the fill valve, and the internal gas pressure for any reasonable period of time. In terms of filling at game site , I keep the cannister in a thermos flask thermal jacket with two small rechargeable hand warmers on either side. I bought both the thermal jacket and the hand warmers cheaply on Amazon. Also small £9.99 digital scales are a great tool for keeping tabs on gas levels- an empty GM P Mag weighs 339/340 grams, and full to the limit is around 370 grams, with consumption at around 5 bbs per gram.
  17. This advert is COMPLETED!

    • For sale
    • Used

    Vortex Razor Gen 2 1-6 LPVO telescopic sight This Vortex Razor gen 2 clone is made by Holy Warrior. Near new condition with super clear optics. Great eye relief. Comes with replica Geissele scope mount and kill flash. Will be sent well packaged in the original box. Will be sent Royal Mail 24hr tracked. Price includes Paypal fees and delivery.

    £140

    - GB

  18. Guns Modify do a metal hop adjuster wheel. It has 36 adjustment increments as apposed to the 24 in the standard plastic adjuster wheel. Subsequently it is much more precise, and has a metal plunger with a strong spring. I have fitted it in 2 of my MWS rifles, and it holds zero perfectly. It is rated to only lift 0.35bbs, but with the high end hop rubbers now available, like the Pink Flamingo and the ML MR hop, I have found it has no issues with 0.40s and 0.43s in my DMR builds. However you will likely have to buy it from HK from somewhere like Airsoft global, though you might get it from Fire Support.
  19. This advert is COMPLETED!

    • For sale
    • Used

    Tokyo Marui M4A1 MWS WITH 4 MAGS, AND REAL STEEL FURNITURE. Literally never skirmished, unmarked like new, just test fired in garden. Part of my MWS collection that needs to go to somebody that will use it. Mags are all gas tight and unused. I have fitted a 300mm 6.05 brass barrel to take the rifle up to sight levels - shooting 1.0J on .32s (333fps on 0.20s) at 10 degrees on green gas, which will increase with warmer weather. I have also fitted a TNT HLR silicone bucking, and a Bagadi nub from Bagadi Airsoft in Germany (like an Omega nub but slightly longer, providing more hop) so hops 0.32s easily. Externally the rifle has a real steel furniture - a real M4 handguard - strong and superbly made in aircraft aluminium, a genuine fore grip, and a real S&W M4 stock - see pictures. With original box. You are welcome to test fire at my house, or I can Parcel Force it for £20. Price includes Paypal fees.

    £550

    Crawley, West Sussex - GB

  20. This advert is COMPLETED!

    • For sale
    • As new

    3 x Tokyo Marui MWS Magazines - new unused and gas tight. £130.00 24hr despatch. Price includes fees and delivery.

    £130

    - GB

  21. This advert is COMPLETED!

    • For sale
    • Used

    Tokyo Marui MWS L119 charging handle. Painted, but will come off with nail varnish remover if you do not want a tan colour. 24hr despatch. Price includes fees.

    £15

    - GB

  22. This advert is COMPLETED!

    • For sale
    • Used

    LCT ZDTK-4T Silencer with Tracer Unit (14mm x 1.0 CCW L) Aluminium and Steel construction. Supports green and red tracer BBs. Includes rechargeable battery and USB charging cable. Perfect for the AK, but will fit any counter clockwise 14mm muzzle. Has a couple of scratches (see picture), but has not ever been used in earnest so in perfect working condition. Normal new price £150 from Fire Support. 24hr despatch. Price includes fees.

    £85

    - GB

  23. Salamanca

    Magpul AFG

    This advert is COMPLETED!

    • For sale or swap
    • Used

    Genuine Magpul AFG FDE. Perfect condition. Will be sent Royal Mail 24hr.

    £20

    - GB

  24. This advert is COMPLETED!

    • For sale
    • Used

    L119 Angry Gun kit for MWS- long rail version. 12.75 INCH RAIL and 15.7 inch outer barrel. Full kit to convert TM MWS M4 to a long rail version of the L119. Everything as shown including barrel nut, Socom 4 prong flash hider and Angry Gun SOCOM 556 silencer. Has been removed for MK12 conversion. Having the correct barrel nut it will go straight onto an MWS. All this normally costs around £380 new. Has been painted, but easily removed with nail varnish remover and a bit of time. Will be sent Royal Mail 24hr.

    £160

    Crawley - GB

  25. This advert is COMPLETED!

    • For sale
    • Used

    ARES SR25 M110K - SHELL A repair project that I am simply not getting round to doing, mainly as I am into GBBR now. Originally it had an Ares v2 gearbox, whose proprietary built-in mosfet short-circuited causing the lypo to burst. I then put a cnc v2 gearbox into for a DMR build, which was fine until the Gate Aster started doing its own thing. I then decided to put an external mosfet like a Warfet into it, but have never got round to it. External finish is much like new as it has had very little use, complete with all original trade markings. Comes with 3 mid cap 160 rnd magazines, Magpul STR stock (painted), PTS angles foregrip, and PTS pistol grip. The l/h mag release catch is disconnected (see pic) - needed for standard V2 box, but the r/h obviously still functions, and the r/h ambi safety catch does not work (bonded firm), but the left side works. Will come in original box. Price includes Paypal fees and Parcel Force delivery.

    £160

×
×
  • Create New...