Rollade

VFC SCAR H 3MONTHS OLD BEEN SEMI LOCKED SELECTOR HAS HAD NOTCH FILED OFF. NEVER USED ONLY TEST FIRED AT HOME,NPAS SO GOES UP TO 450FPS  SO CAN BE USED WHERE EVER YOU LIKE. MAPLE LEAF EXTENDED BARREL 4UTAM HOP RUBBER 4 NEW MAGS CLONE GPST GRIP BRAND NEW SPECTER DR SIGHT [CLONE]BUT A VERY GOOD ONE. UPRATED BUFFER,CASE NOT INCLUDED BUT DO HAVE ORIGINAL BOX THIS IS A RELUCTANT SALE SO PLEASE NO TIME WASTERS THIS WAS A HARD FIND AS TAN VFC SCARS ARE HARD TO COMEBY 
PLEASE MSG OR CALL ME ON 07745322403 LOCATED IN WEST MALLING KENT

VFC Sig P226 MK25
 
full metal gbb, fully licensed by sigair so complete trademarks as per real steel counterpart. 
 
had a few mags through it, no games, comes stock out the box with one gas tight magazine.
 
in near new condition, freeing up some collection space for new projects.
 
price includes postage 

Northeast Sten Gun MK2 Skeleton Stock for sale, in as new condition, only 1 magazine 
 

Built on A&K base 
Including the correct:
Sling
Top cover
Front sling mount 
Flash hider
3d printed gas block 
Gas reg
Charging handle
Carry handle
Jungle box mag
Oversized orings fitted (doubles air efficiency)
Laylax 6.03mm inner barrel
Also includes a belt of 7.62 aswell as spare hop rubbers, air line and orings 
Daytona kit fitted and broken in, reached 70m maximum on Bristol Cribbs range (video link below)
Recommend >0.3g non-bio bb's
LOTS more pictures on request, open to offers and any questions
Buyer should be aware Daytona's are very involved and need maintenance 
Collection Bristol, or can meet in middle, postage can be arranged but won't be cheap. 
 
 
 

Please note: I haven't been receiving email notifications for direct messages over the last few days, so if you don't receive a reply within a few hours please feel free to email me directly at [email protected]. 
 
Unused/unopened flute valve for the RA Tech aluminium nozzles for WE and KWA M4s.
 
Thanks for looking, please feel free to ask questions.
 
Postage included (RM Tracked48) in the price.
UK address only please.
I accept PayPal (Goods and Services)

Hello all.
 
I’m taking a bit of a break from Airsoft so I’m selling a few of my bits.
 
For sale is my KWA VZ.61.
Installed;
-Maple Leaf EVO3 tensioner and 70-deg bucking 
-3D printed recoil buffer (I have 3 spare, they’re pretty darn good)
-CowCow piston cup (claims to be for the KWA pistol range, however, works well)
 
Included also;
-Airtac HPA drum adapter and Tokyo Marui MP5 400rnd Drum 
-20rnd magazine
-2 extended magazines (1 was used as the adapter donor)
-3D printed 1913 Stock adapter 
-5KU side-folding stock
-Original over-folder stock
-3D printed suppressor 
-Box including all original paperwork and hop adjuster key
-Any other items from swapping over parts
 
The gun works just fine, seeing ranges of about 50 meters with a 0.3g at 1J. It will over-hop weights under 0.25g and begins to stop hopping at about 0.38g. Wear wise, it’s got some marks on the takedown pins, and around the selector switch. It is also missing the pin that holds in the V-notch at the rear sight, however, I do have the other parts of that assembly that are now no longer attached. It is deliberately missing a roll-pin that holds the hop assembly into the outer barrel assembly, however, this is still held together by the 2 body pins at the front. The inner barrel clip that stops the assembly from rotating inside the outer barrel has broken in half, however, when placed carefully inside as it should be, it still does its job. The barrel window has also been filed slightly to accommodate the ML EVO3 setup. 
The 3D printed suppressor is also falling apart. The threads are stripping off and I’ve somehow managed to shoot the end cap so I’ve strategically covered it with hockey tape. It still works fine and holds a tracer well enough if you’re careful with it. 
The HPA adapter it seems is a bit strange as it bottlenecks the pressure on my setup but works fine on a Balystik rig.
 
These issues are reflected in the price though they don’t actually harm the guns performance/reliability and I would argue it improves it slightly. It’s been a great and fun gun for me but unfortunately I just have to let it go.
 
I am happy to deliver within about an hour of Northamptonshire but I’m also happy to post. 
 
If you have any enquiries, feel free to WhatsApp me - 07495745995.

Thanks
Josh
 

Genuine Elcan C79, otherwise known as the Elcan Spectre OS3.4x
 
Scope is real, mount is real, reticle is the canadian post. As far as I'm aware, this is the first and only C79 to enter the UK
 
The C79's were never intended to be surplussed afaik so it's a bit rare to say the least, from what I can tell they were supposed to all be destroyed as part of the C7A2 modernisation program
 
The rubber cover is in great condition with no solidification or decay and so is the mount, which has not been modified to add in the tensioner spring afterward. The BUIS nubs are all intact, the elevation dial is smooth and still has perfect detents.
 
The front glass has a small chip in the bottom (visible in pics, it's tiny and not deep enough to affect seal) and the picture has a burn mark in the top left corner from service, which is noticeable when looking at a direct light source. I've tried to show this in the most harsh light in the interest of integrity, it's not really as visible as it is in the first photo. I've also added an outdoor photo to show what this actually looks like.
 
In terms of glass quality, it's an Elcan Spectre. Clarity and contrast match my genuine ACOG TA31, it's flawless but I can't justify keeping it any longer, I'm a sopmod guy
 
Price includes shipping, Paypal G&S welcome

Time to admit that I haven't touched this in over a year, so I'm selling up.
 
Gun is fitted with NPAS and maple leaf MR hop rubber 70 degree.
 
Including the trademarked KAC rail panels (reproduction) and happy to throw in the bipod if required, but it's only a cheap reproduction so if you have your own already then no problem.
 
Gun came from the shop with a very slight bend to the front end, I only noticed after shooting that I had to zero my scope a bit over to one side compared to my other guns. It's not bent enough that a scope can't zero over to it, and I've included a picture that shows the very slight angle. Once the scope is zeroed, it's as accurate as it should be and I've been lifting .36's out of it.
 
Buffer is a cut down guarder full length buffer with shifting weights, the original doesn't have this so it can have a bit of bolt bounce. Happy to include it anyway.
 
UID sticker is vinyl and easily removeable at buyers request, the refsheet on the back is just taped on and has some basic info on it for reference, it's clone correct but also easily removeable at buyers request
 
The suppressor has now been sold separately
 
The scope can also be included for an extra 90. Scope is a vector optics sentinel 4-16 with butler creek rear cap and vector front. New price 130 for scope, 40 for the mount, 35 for the piggyback, 10 for the rear cap. Very capable optic setup, but again if you have your own then it's not included in the initial price. It is not going to be sold separately until the gun is gone.
 
Selling with 1 magazine, happy to discuss selling with more for 20 each
 
Postage included in original box, paypal G&S welcome

One of my magpul FPGs. This has only ever been test shot in the garden and is almost new. You can see the condition and how little wear there is on the parts in the photos.
 
I got this so that if one of my others broke i would have a spare but due to not playing as much i dont use them any more. Comes with the gun, sling mount and the extended mag as shown in the photos
 
 

*SOLD*
 
Up for sale is a KWA Kz.61 submachine gun with the following included:
 
.3 spare twenty-round magazines
.Real surplus wooden handgrip
.Real surplus steel folding stock
.Real Vz.61 steel upper receiver (NOT FITTED)
.Factory plastic grip
.Real ten-round .32 ACP magazine
.Czech leather Skorpion holster
.Two double twenty-round magazine pouches
 
UK-only sale, price is £300 plus postage and packaging.
 
Any questions or offers please PM me.
 
Will send via courier (Parcelforce). Pick-up can be negotiated if the buyer is local (Hampshire Area).
 

Price includes paypal fees and postage. 

Works as it should and all 6 shells are gas tight. Dont know the brand of either the launcher or the shells. I would be willing to split the shells for £100

I bought this with the intention on converting it into a Lone Survivor MK12 but it ended up being too much work and I just never had the time.
 
It came with a trigger box issue which I'm led to believe is common for these rifles (I haven't fixed this, but I'm happy to purchase a replacement if someone wants to mess around fixing it)
 
I replaced the crappy original RIS rails with a free float KAC rail (included in sale) which cost me about £80 and fit nicely with no wobble, however I've since switched them back as one potential buyer didn't want the KAC. The rails have no cap by the front sight to hold them in place.  The last owner had them zip tied with a load of sniper tape around the barrel to give it some stability.
 
Comes with one magazine otherwise it's sold as seen in the pictures.
 
The threaded barrel had a really crappy suppressor on it which I got rid of and I don't have any spare flash hiders to fit onto the and of the barrel.
 
Not quite sure what its worth at this point, so I'll advertise it at £350 but feel free to negotiate/make offers.  I got stitched up with this a couple of years ago and didn't know all the faults when I bought it.  I paid about 350 so after I buy the new trigger box and what I spent on the rail, I'm taking quite a hit but I just need to shift it.
 
Could make a nice wall hanger but not ideal for skirmishing as it is now!
 
07763839631 for more info/pics/offers/etc

Starting to clear out guns I don't use now to get some stuff my daughter wants now she's playing.
 
Up here is a we t91 gbb , it has 4 magazines . 3 are gas tight the 4th is leaking from the main valve ( I will see if I can sort it) 
Shoots great and locks back on empty. It does have some surface rust on the steel parts ( barrel , etc ) but I'm cleaning this up atm. 
Has a real pts stock and real quick pull body pins.
 
 

£145
 
Excellent condition comes fully boxed
 
• switchable full-auto
• metal slide
• Picatinny rail on underside
• Adjustable Hop-Up
• Gas blowback
• Authentic replica
• Hop-Up key included
• Hi-Capacity 50 Round magazine included
Length 198mm
Weight 654g
Energy < 1.0 Joule (approx 290-300FPS with 0.20g BB)

£120
 
Excellent condition a few light scratches on rail, comes fully boxed with and additional mag ( 2 in total ) plus a torch light/laser combo attachment.
 
Gas Blowback GLOCK Licensed Fourth Generation The pinnacle of high quality & authentic airsoft replica's is here, UMAREX Presents the Airsoft GLOCK 17 Gen.4.

£115
 
Excellent condition, comes fully boxed with and additional mag ( 2 in total )
 
Gas Blowback GLOCK Licensed Fourth Generation The pinnacle of high quality & authentic airsoft replica's is here, UMAREX Presents the Airsoft GLOCK 17 Gen.4.

Cybergun co2 1911 in parkerized grey finish.
 
bought for a project ive decided not to bother with
 
in full working order, some scratches but entirely cosmetic 
 
price includes postage

HK M27 by VFC/Umarex
excellent condition
never skirmished
 
Open to reasonable offers
whatsapp 07763839631
 
 

The wooden stock M14, which I bought in March, includes sight mount the box and the original polymer stock. It's too heavy for me. And I have to chip in for rent, so the price is negotiable.Never played in the game and only fired about 20 rounds

Used M14EBR includes RA steel trigger, Steel bolt, 60 degree hopup and MAPLE LEAF 433mm inner barrel and NPAS as well as original bolt. All 3mag
 
The price is negotiable.
 
 
 
 
 

M2 Carbine. There are three long magazines including the straps a short CO2 magazine and a magazine pack

 
 
 
 
 

I bought this launcher used, comes with everything In the photo which Is the launcher Itself with three grenades plus a sling and extra stock

as new unused Cybergun Desert Eagle for sale
 
PLEASE ENSURE THAT YOU HAVE A VALID DEFENCE SUCH AS UKARA, MEMBER OF A RE ENACTMENT SOCIETY ETC

Maruzen Gas Blowback Walther P99 James Bond Gun Working but will need a service, Never been used in a game only in the garden, No leaks on the Mag
 
The rear sight is missing but i believe one can be found on line
 
Can post to UK address for free
 
 

This is G&Ps recoil version which is a rare gun now, excellent external quality. It's currently non firing, something stripped inside the gearbox.