Rollade

VFC 416GBBR TNT hop chamber and barrel upgrade with adjustable npas, shoots like a frickin laser beam, brand new bolt carrier group, only selling as I’ve got a VFC MCMR on the way. It has one issue with the bolt lock not working, still shoots and cycles perfectly but doesn’t lock on empty, this is due to a missing spring I dropped in the field 🤦🏻‍♂️ the new spring is however on the way from Taiwan so will post to buyer if it sells prior, or this issue will be fixed if it arrives before sale. It does only include the one mag as I need the rest of em for my new GBBR, I can sell extras at full price(they’re all brand new) as I’d just have to replace em anyway. Comes with the grip but not the PEQ or red dot. Located Edinburgh and willing to drive up to 50 miles for fuel, or can post at buyers expense. £330

Replica of the Original AN/PEQ-15 ATPIAL by VFC, this is the best version of this particular laser as far as I am aware, as most other laser replicas on the market are replicas of the newer PEQ-15 LA5 UHP. This one would be clone correct for a MK18 or M4 SOPMOD. You can tell the ATPIAL apart from the LA5 by the stickers on the left side of the unit. The zero adjustment turrets, the battery cap and the placement of the blue lockout screw.

This case is in like new condition as it been only used once and been under my bed for the past couple of months. The wave foam inside the case has no damage or wear and the case itself is not damaged. 
 
Postage is £10

Selling a rare (out of stock or pre order) Ace1Arms OSP Suppressor 7" in Black by SilencerCo.
 
Includes the range up/power up kit that consist the Inner Power Up Barrel, Spacers, Piston removal tool, - x3 Pistol Adapters that are 14mm clockwise, 14mm counter clockwise, and 16mm clockwise to fit relatively most gbb pistols/aeg/hpa rif accordingly.
 
Cleaned and stored properly.
 
Total asking price includes postage. Sent with Royal Mail 48. Payment via PayPal. Any questions message me, thanks for looking

This sucks but sadly it must be done. I'm having to sell my VFC M3 MAAWS (Carl Gustav) gas launcher. 
 
It's in immaculate condition, only seen 1 game and 1 range session to test it. Package includes:
 
Launcher 
Sight mount
Original 84mm shell with moscart
Additional 65mm shell with gas cannister
7x rubber grenade heads for the moscart
11x 65mm balls
A load of 0.12g ammo for the moscart and the balls.
 
It turns heads this thing, it's such a laugh to use but genuine reason for sale means it has to go. Wanting £625 for everything which I feel is reasonable for everything that is included.
 
Due to size and weight,.collection is preferred but postage could be arranged at buyers expense. 

These are arguably the prettiest and most desirable of all Resi pistols, and as such command the highest price. These are very hard to get hold of, more so than any of the revolvers or the TM lugers.
 
£650 to your door. Also open to trades and part exchanges on GBBRs etc

Cybergun 1911 with genuine wood grips, boneyard as mag doesn't hold CO2 and don't have the tools or knowhow to fix it. Cosmetic wear to the slide finish, fully functional otherwise. Collection or +postage

Hi there I have a Tokyo Marui 1911A1 for sale comes with a spare magazine both are leak free comes with box only shot in back garden 😊 wanting £100 but open to offers 😊 buyer pays postage PayPal payment any question email me [email protected] ore text me 07530689244 I can provide better photos and shooting if needed 😊
 
many kind regards Andy 

Good used condition , used to wear on the rifle range , having a clear out, free postage, any questions please ask, thanks 

Hi all, up for sale is my FFI DRIFIRE combat set in medium. It’s has only been tried on to see if it fits, however I’m too fat for it!
 
No knee or elbow pads are included, however CLAW gear make decent DF styled pads which may be worth a look. 
 
This is medium so 32 inch waist or below should fit, I’m a 34 so too small for me. 
 
Price is inclusive of PP fees and postage. If you have any questions please drop me a DM. 
 
Thanks for looking.

Welcome to the reluctant sale of my WE Apache A3 everything seen is included, 4 mags (3 brand new and one with slight intermittent leak) Unfortunately selling due to a change in personal circumstances. Please feel free to ask any questions! 
 
Feel free to contact me on 07534526608 

Make: VFC
Gun/Model: M16A1
Accessories: 1 leak free magazine
Condition: Goid condition. Very light use. Some scratches as pictured.
FPS: Gas and temp dependent
Splits/Swaps/Part Exchange: N/N/N
Price/Payment: £485 posted and paypalled
Pictures: Attached

Very light use. I’ve not fired a bb through it. It was bought as a display gun to go with my M203. There are a couple of scratches on the paintwork from fitting the M203. The main one on the right side of the receiver I’ve tried to cover with a sharpie. I’ve not messed about with the internals. All stock and as new. I sold the 20 round magazine as I prefer the look with the 30 round mag.
 

For sale.
1. ‘Rhodesian’ woobie by Perseverance Tactical USA, size M, in as new condition £60 all in
 
2. Adventure Tech reversible Goretex jacket, night camo & 3 colour desert, has size M & size L tag but fits as M to L, in as new condition  £220 all in

Price drop.

Having to sell up as I sadly don't make the games anymore.
 
So your chance to benefit from my misfortune!
 
I'm selling my Ares No4, 6 magazines and pig stick bayonet. Used once so in excellent condition and asking for £500 plus shipping to UK.

Here we have the Asia electric m17 modeled after the real world sig p320 or m17 great looking gun however doesn’t preform all to well so just looking for a quick sale on this.
 
included:
M17
X4 leak free mags
 
 
collection only from Gloucester will discuss a place and time to meet, I can drive out to meet half way at an additional cost. I will not post in the mail so please don’t ask. No trades

£750
 
https://www.google.com/amp/s/m.made-in-china.com/amp/product/Da-Nvgb-Helmet-Night-Vision-Binoculars-Gen3-Military-Night-Vision-Goggles-1966431025.html
 
RRP $2500
PVS 7 Copy

Thales 23386-1600629-1 30-90Mhz - Very good condition, not much more to say. - £70 
  Harris 12011-2730-01 30-512Mhz - Salty -Kinked whip, has been jerry rigged with electrical tape -Acquired from ex US army, if its good enough for military.... - £90
  Excluding Post and Paypal Shipping from GB Open to Offers. Looking for a nexus PTT u94 6pin Nato (ideally short lead) Thanks

Mk 12 mod 0 conversion set
 
Dummy peq 2 
Top rail 
Rear sight
Front sight
Suppressor 
Spr flash hider not pictured
Harris style bipod
 Spr grip
£70
 
Nitesight m3 type scope with clone arms qd lever mounts and railed mount with sunshade 
 
£70
 
 
All collected from chepstow or can post at cost and pp fee covered by buyer

VFC UMP9 

6 mags in total, all mags had the channel
sanded down and gas router replaced with the hard rubber from the UMP45 mags. These are all to address the loading and gas router wearing issue. 
 
also comes with the QD sling adapter 
 
100mm inner barrel installed with stock TM rubber( for lower/legal fps) 
 
all works as it should, will comes with some spares if I can find them including hammer, auto sear, hop adjuster ect. 
 
 
Face to face only from Leicester, any question please ask OR message me on 07393187136. 
 
 
 

As new condition, works perfectly with no issues... not my style of optic, was wall hanging  on my a1sfw. Would consider swaps or px for genuine optics only. Feel free to pm me 

M9/M92F Aluminium Slide & Frame Marui Beretta.
 
new- already assembled
 
RRP: £157
 
https://www.fire-support.co.uk/product/guarder-aluminium-slide--frame-for-marui-m92-black

For sale or trade. 
 
comes with original lens caps(not pictured) and kill flash. 
 
pm me if any questions, or message me on 07393187136 for quick reply. 

Hi
Selling my WE M712 gbb pistol. In very good condition. Comes with 3 gas tight mags, plastic stock/holster, and some real wood grips that will need ‘fitting’. £200
 
also available is a real wood stock/holster that takes the gun in with the 20rnd mag inserted, unlike the plastic one. It will need some fitting with a needle file to attach to the M712, which I have started already
£80
 
thanks
jay

SOCOM Gear “The Hitman” (Leon) Beretta 92F. 
 
Only used for display and very occasional plinking. Lovely pistol, full metal, correct trades on the compensator, and “The Hitman” and “No Women, No Kids” engraved on the slide. Shoots perfectly, no issues. 
 
Also comes with a set of Guarder Beretta grips, plus originals. The Guarder ones are a little thinner than the originals so the screws are a tiny bit loose, these could be shimmed out but it’s not bothered me. 
 
Comes with x2 mags, original and silver(original has slight leak from fill, will hold gas for a week though). 
 
£115 posted 

This started life as a WE AK PMC Fixed Stock Receiver, which has been converted into a AK-105 length front end with all parts replaced with Zentico where possible
Built using a mash of different Brands, it took a painstaking amount of hours to figure out and modify to the WE reciever, but fitment is rock solid
 
Front Muzzle to Rear:
External Internal
5KU Zenitco DTK-2 Muzzle Brake LCT AK105 Gas Block 5KU Zenitco B31 Upper Rail 5KU Zenitco B30 Lower Rail CYMA AK74 Gas Tube 5KU Zenitco B33 Dust Cover Zenitco RP1 Charging Handle (Permanently affixed) W&S Classic Style AK Selector 5KU Zenitco RK3 Pistol Grip Russian Thunder Genuine Fixed AK Stock Adapter 5KU Zenitco Gen 2 PT1 Stock  
Maple Leaf Crazy Jet 250 mm Inner Barrel Maple Leaf Wonder Hop 70 Degree  WE Brass Short Stroke Adapter WELL Steel Trigger unit provided as spares for stock unit) All of these parts have been modified to fit the WE AK, mileage may vary if you look to use these in another build down the line
Also included:
4x Magazines in 5.45 Style 5x Magazines in 7.62 Style (1x Boneyard as spares) A complete classic 105 furniture kit (you will need a folding reciever to use the stock however All of the original furniture A Midwest industries branded dovetail mount A Replica of a classic standard issue Russian AK Sling Some miscellaneous spares and extras that will try and dig out Condition:
External wear from its time skirmishing indoor and out, rather AK like, bumps and scratches throughout shoots, feeds, and hammer drops on empty, please note the mags are intermittent with the hammer drop tab, so I mostly run it with it off  Internals are in good condition, the hammer has been replaced with a WELL Cast Steel Hammer The outer barrel was rather sloppily chopped down by me, the gas block is mostly held in by pressure fit, the front sight might tend to wander left or right from time to time, a simple zip tie keeps the gas block in firmly place, the messy barrel cut is only noticeable when the front end is disassembled
   
 
Build Cost comes in around £1000+ including magazines
Asking £525 All in
Open to Offers/
Trades w/ cash on top for any other GBBR of intrigue
Payment:
Paypal
(Parcelforce 24 1st Class Track and Signed for)
or
Collection (W Yorkshire) 
Part out (Gun and magazines)/Swaps/Exchange: No/No/No
 
Additional Information:
Very Solid Performer, with the dice roll that is the current state of GHK QC, WE was a decent alternative if you're still going for steel externals These come out the box with VSR barrels unlike the GHK, so you can get really decent accuracy without breaking the bank on custom CNC hop conversions These get a bad rap because of the butt ugly PMC furniture these ship with (which I feel almost entirely killed these being popular) as well as the being full stroke, the spring loaded brass half stroke adapter puts this on par with all other options on the market in terms of snappiness and recoil impulse Please note: this is a heavy beast, with attachments moreso, so please make sure you are getting plenty of protein using this thing  
Please Feel Free to PM me or Text on 07967057776 if you require any more information
Thanks for looking
 
shooting video attached: