Ronin0033
-
Posts
259 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Ronin0033
-
This advert is COMPLETED!
- For sale
- As new
Pretty much as new, a Tokyo Marui Samurai Edge Standard Model (Original Issue) Its pretty much mint, with only very slight marks around the safety where it has been engaged. Comes with one standard mag, and an extended mag, both gas tight. Boxed with original manuals. £110 posted£110
- GB
-
This advert is COMPLETED!
- For sale
- Used
3 GBB pistols for sale. Top Left: APS APC Match co2 powered semi auto. Came to me in pieces, has since been completely rebuilt with brand new parts direct from ACP including: New hammer assembly New front & rear fibre optic sights New mag exhaust valve New mag lips New Nine Ball gas router Fires perfectly. Barrel is threaded and will come with mini suppressor £90 posted Top Right: Armourer Works Black Ace Pretty much as new, this is the full/semi auto version of the black ace. Has a Waldo Snappy Boi nozzle spring fitted, and comes with standard & extended mags. £105 posted Bottom: WE Glock 18c Again came to me with issues, now working perfectly with the following Brand New parts fitted. New full auto hammer assembly New black inner barrel and hop unit 1x magazine Outer barrel has had hole drilled in it I presume to TDC at one point, however no effect on functionality. I do have a Hadron design TDC outer barrel and spare inner barrel set that this will fit, if the buyer wants it for an extra £20. £75 posted£12,345
- GB
-
This advert is COMPLETED!
- For sale
- Used
APS ACP Match and Black Hornet pistols for sale. These came to me boneyard, with most parts in a bag… They have both been completely rebuilt with brand new parts direct from APS, and now shoot perfectly. Both are CO2 powered, but you can change nozzles I believe to run green gas. Match: Had new complete hammer assembly, new fibre optic sights, new CO2 valve in mag, new mags lips, and Nine Ball gas router. Comes with 1x mag, and nice little compensator/suppressor for internally threaded barrel. £105 posted Black Hornet: New complete full auto hammer assembly, new co2 valve, new mag lips and Nine Ball router. Also comes with brand new spare nozzle assembly. £105 posted Payment via PayPal or collection from Swindon.£105
-
This advert is COMPLETED!
- For sale
- Used
SilencerCo licensed Osprey suppressor. Made of aluminium. It’s the .45 cal 6” version, with a 16mm CW thread. Fits Mk23/Vector and others. Boxed, but box stickers don’t match the suppressor (box says 14mm thread) A few marks on both sides from use. £25 posted£25
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Stainless Steel 500mm long 6.03mm inner barrel. Bridged hop window for AEG. £22.50 posted Also a new MR Hop Rubber for AEG & omega nub. £12 posted Both for £30 posted Will also swap for VSR/GBB cut barrel of same length (500mm)£30
- GB
-
This advert is COMPLETED!
- For sale
- Used
G&G UMG 45 AEG. It is standard inside and out, has been used but no damage anywhere. Firing at 270fps. Everything works as it should. Only issue is it’s missing the front body pin, this has been replaced with a correctly sized roll pin. Comes with the correct G&G UMG Suppressor, which directly mounts on flash hider. Also comes with 2x hi cap mags. £150 posted Payment via PayPal (fees not included), or bank transfer. Also can be collected from Swindon SN2£150
- GB
-
This advert is COMPLETED!
- For sale
- Used
DTD holster for Mk23/SSX23 pistols. Used in a few games, a few scratches but functions as it should. £20 posted Payment via PayPal (fees not included), or bank transfer. Also can be collected from Swindon SN2£20
-
This advert is COMPLETED!
- For sale
- Used
Five Hi Capa magazines for sale. They were brought as a boneyard bundle. All have been stripped, cleaned and all seals lubricated. Some have had brand new replacement Guarder feed lips and new WE bumpers. All have cosmetic marks, but no dents etc. ALL ARE GAS TIGHT, ALL PERFORM PERFECTLY! These are 4.3 size, they will happily run in all size pistols if you don’t have a magwell. 3x Tokyo Marui 4.3 mags - £18 each posted 2x WE 4.3 mags - £15 each posted Obviously I will do deals on anyone buying more than 1, just let me know how many you want. Payment via PayPal (fees not included), or bank transfer. Also can be collected from Swindon SN2£18
- GB
-
This advert is COMPLETED!
- For sale
- Used
For Sale, a Tokyo Marui SiG SG552 Seals AEG. This is as standard inside and out. Shoots perfectly and consistently at 275fps on .20. Very nice external condition, only a few signs of wear on the pistol grip and flash hider. Comes with: 1x short mid cap magazine 2x long mid cap magazines 2x hi cap magazines Top Rail Dummy PEQ box Aimpoint T1 Red/Green Dot (I *think* this is rep, but it’s been painted so no idea) Aluminium Case - bit battered but does the job £210 posted Payment via PayPal, or cash on collection from Swindon.£210
- GB
-
This advert is COMPLETED!
- For sale
- Used
5x G&G Kar 98K magazines for sale. These came to me as boneyard (and in parts!). They have been stripped, lubricated and rebuilt. 4 are now complete, and 1 is spares as it is missing at least 1 o-ring and 2 bolts as far as I can tell. The green gas ones are gas tight, but I cannot test the CO2 ones as I have no CO2 capsules, hence the low price. These are usually £45 each, if you can find them… Package is: 2x Green Gas magazines 2x CO2 magazines 1x CO2 magazine (missing parts) Bag of mixed spares for these. £60 posted for everything Payment via PayPal or bank transfer. Collection also available from Swindon£60
- GB
-
This advert is COMPLETED!
- For sale
- Used
Ten Hi Capa magazines for sale. They were brought as a boneyard bundle. All have been stripped, cleaned and all seals lubricated. Some have had brand new replacement Guarder feed lips and new WE bumpers. All have cosmetic marks, but no dents etc. ALL ARE GAS TIGHT, ALL PERFORM PERFECTLY! Some are 4.3 size, and the rest are 5.1 size (both will run in either size pistols if you don’t have a magwell) 3x Tokyo Marui 5.1 mags - £21 each posted 2x WE 5.1 mags - £18 each posted 3x Tokyo Marui 4.3 mags - £18 each posted 2x WE 4.3 mags - £15 each posted Obviously I will do deals on anyone buying more than 1, just let me know how many you want. Payment via PayPal (fees not included), or bank transfer. Also can be collected from Swindon SN2NO VALUE SPECIFIED
- GB
-
This advert is COMPLETED!
- For sale
- Used
For sale I have x2 Western Arms (deep breath) SV Infinity Xcellerator Hybrid 6” Brushed Nickel GBB pistols. These are in a custom case, complete with a spare mag for each. I brought these as they were unloved/unused for a while. They have been completely stripped, cleaned and lubricated. Mags are all gas tight. I have replaced the safety and springs/plungers on one of the pistols as they were missing, however the new safeties are silver rather than brushed nickel. Not massively noticeable but just so the buyer knows! Both are firing with no issues at 295fps with .20 on Nuprol 1.0 gas. Package is: 2x WA SVI Xcellerator Hybrid pistols 2x WA SVI Magazines (brushed nickel) 2x WA SVI Magazines (silver) 2x WA SVI Speedloaders Aluminium lockable case Massively rare to find these pistols now, and especially rare to find a matching pair! £230 posted and paypal’d Or collection from Swindon£230
- GB
-
This advert is COMPLETED!
- For sale
- Used
Western Arms SV Infinity 5” Limited GBB. Came to me as part of a job lot. Was missing the guide rod and front sight. These have now been replaced with a DP Fibre optic front sight (glued in as not a direct fit for WA), and an Airsoft Masterpiece guide rod. Pistol and mags have been completely stripped, cleaned & serviced, and it fires flawlessly. Will come with x2 magazines, and in a Glock hard case (yeah, I know!). These are very rare nowadays, and this one is serial numbered on the frame. £120 posted and paypal’d Collection also available from Swindon£120
-
This advert is COMPLETED!
- For sale
- Used
Taken as part of a job lot, this is an original Toyko Marui MC51. Made in limited numbers in the early 2000’s, this has been with the same owner since new. It even has the original Japanese warning sticker on the side…! It has a receipt from 2004 for a M100 spring and new bushings. Other than that I believe it is completely standard. Chrono’d today at a consistent 320fps. The only issue is it is missing the front sling pin (£11 for a new one), currently secured with a cable tie. Comes with: 3x TM hi cap magazines TM G3/MP5 Claw mount 4x32 scope (treat as a freebee, it seems a little cloudy) Original Manuals! Black Gunslip with pockets £170 posted and Paypal’d Can also be collected from Swindon.£170
- GB
-
This advert is COMPLETED!
- For sale
- As new
X3 Action Army stainless steel HPA adapters for KWA/KSC spec magazines. These came from MP9 mags I brought a while back, but I converted them back to green gas valves. They have no damage, the o-rings look a little worn though. £15 posted and paypal’d£15
- GB
-
I had one of these, think I sold it for about £25-30.
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Wanted a KWA/Umarex Mk23 SOCOM GBB. *NOT A NBB VERSION* Not too fused if it’s boneyard or working, as long as it’s mostly complete. Let me know what you have!£1,234
-
This advert is COMPLETED!
- For sale
- Used
ASG SVD Dragunov spring rifle for sale. This is essentially a rebranded A&K SVD so will fit all/any upgrades for a the A&K. Very sturdy, fires perfectly, no issues. stripped, cleaned & lubricated last week. Firing at 440fps with .20’s and 290fps with .40’s. Boxed with mid cap magazine. £100 posted or collection from Swindon£100
-
This advert is COMPLETED!
- For sale
- Used
For sale Sniper Mechanic SRS WASP piston and Spring Guide. This has some scratching to the steel weighted cylinder and one of the collars, this is where previous owner locktited the weight on… These have been cleaned up so are now smooth. They have no affect on function, still has perfect seal! Comes with the steel, aluminium and plastic weights. £40 posted£40
- GB
-
This advert is COMPLETED!
- For sale
- Used
For sale I have a very large ESSLNB 6-24x50 Illuminated Mil-Dot scope. It came on my SRS, however I needed something with a bit less base magnification. Everything works as it should, I dialled it in perfectly for the SRS with the windage/elevation towers. Has a few minor marks, but nothing significant. £50 posted£50
- GB
-
This advert is COMPLETED!
- For sale
- Used
Up for sale I have my custom VSR10. Only selling due to now moving to the SRS platform for sniping. This has been built as a labour of love over a couple of years. Started as a basic VSR10 G-Spec, now is a fully upgraded beast. Not alot remains of the original TM parts, only the stock and receiver still left on the rifle I think. All the original parts will be included in the sale if you want it. Spec and parts as follows: TM VSR 10 G-Spec Outer barrel - bull barrel, internally suppressed with foam. Bolt Handle - Laylax Inner Barrel - ML Crazy Jet 300mm Hop Chamber - Action Army Hop Rubber - ML Autobot 2021 70degree Hop Nub - Stalker Panthera Cylinder - Action Army Teflon Twisted Piston - Springer Custom Works with airbrake Spring Guide - Springer Custom 9mm stainless (also heat-shrinked for extra quietness!) Spring - Rapax 2j Laylax Sorbo Pads (with spares) Trigger - Springer Customs S-Trigger v9.2 Pro Orange Cylinder Sleeve/guide ring TDC - Tridos Pro Version Enlarged mag release - Maple Leaf Scope - 3-9x40 Illuminated Mil-Dot, with sun shade Harris style Bipod Custom Cheek Riser 3x mags, 2 with “Magpuls” fitted Currently firing at 312fps on .48’s, just below the limit to allow for chrono variations. Outer barrel has 5/6 inches of internal foam rings starting at the end of the inner barrel, so is dead quiet. Stock is also filled with foam in any hollow spaces to deaden sound. This has £600 in parts alone, without the base rifle. Fires spot on. Has been skirmished 4 or 5 times (last time being yesterday!) and I have never had an issue with it on the field. £450 collection from Swindon SN2, or can be delivered locally. £465 posted£465
-
This advert is COMPLETED!
- For sale
- Used
For sale I have an original Toyko Marui XM177a2 spring rifle. Brought maybe 1999ish from Stringtown Supplies (bonus points if you remember them!) Full working condition with original box. Stock slides nicely, and has a secret fold down grip that you can use to cock it like a shotgun! Comes with 2 mags, one working, and one not (missing internals). £70 posted Payment via PayPal, can also be collected from Swindon SN2£70
-
This advert is COMPLETED!
- For sale
- Used
Brought as boneyard, it was having nozzle issues, since fixed with new nozzle return springs, fires perfectly now. I did plan on giving this full Wii Tech internals, but other projects are now taking up my time(& money!). Fitted with a Lees Precision Engineering 14mm muzzle adapter, so it can take normal 14mm suppressors. I have removed the front rail, but will be included, I can put it back on if buyer requests, I prefer the look with it off. The top cover was once red, then painted black, but I have removed all the paint back the original tan finish. Comes with 1 gas tight mag. £160 posted Can be collected from Swindon SN2£160
-
This advert is COMPLETED!
- For sale
- Used
For sale I have what’s left of my spring pistol collection. These are 15-20 years old, but all are working with magazines. Starting top left: KWC Beretta M92FS boxed - £17.50 posted KWC Colt 1991A1 boxed - £17.50 posted Tokyo Marui Ruger P85 (original version with correct Ruger trades) - £25 posted Tokyo Marui Ruger P85 (later version with TM trades) - £25 posted HFC Beretta Super Elite - £20 posted Happy to do discount on multiple items. Will do both Rugers for £40 posted, let’s call it the “Desperado” deal 😉 Payment via PayPal, can also be collected from Swindon SN2NO VALUE SPECIFIED
-
This advert is COMPLETED!
- For sale or swap
- Used
E&L AKs74u, complete with custom fore grip and original railed fore grip. Absolute beast, I love this thing but I’ve done all I can to it, and not it’s not getting the use it deserves. Turns heads whenever I did take it out! Real wood fore grip, edges taken off grip to make it much more comfortable when holding. Also comes with original full railed foregrip. Perun Optical V3 Mosfet fitted, currently set to semi and 5 round burst, but can be reprogrammed on the fly. ZCI 6.02 barrel that was R-Hopped by previous owner, loves .28’s. Also 5x E&L mid caps, and 1 LCT mid cap. 3 of the mid caps have been dyed Plum, very nice in the light! All mags have been fitted with “Stopa” genuine Russian Magpuls, again perfect bits of kit. Wired to deans, and in original box. Not in a particular rush to part with this, would be up for a swap/PX for an SRS…. £340 posted Or collected from Swindon SN2£340
