Ronin0033
-
Posts
271 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Ronin0033
-
This advert is COMPLETED!
- For sale
- Used
Taken as part of a job lot, this is an original Toyko Marui MC51. Made in limited numbers in the early 2000’s, this has been with the same owner since new. It even has the original Japanese warning sticker on the side…! It has a receipt from 2004 for a M100 spring and new bushings. Other than that I believe it is completely standard. Chrono’d today at a consistent 320fps. The only issue is it is missing the front sling pin (£11 for a new one), currently secured with a cable tie. Comes with: 3x TM hi cap magazines TM G3/MP5 Claw mount 4x32 scope (treat as a freebee, it seems a little cloudy) Original Manuals! Black Gunslip with pockets £170 posted and Paypal’d Can also be collected from Swindon.£170
- GB
-
This advert is COMPLETED!
- For sale
- As new
X3 Action Army stainless steel HPA adapters for KWA/KSC spec magazines. These came from MP9 mags I brought a while back, but I converted them back to green gas valves. They have no damage, the o-rings look a little worn though. £15 posted and paypal’d£15
- GB
-
I had one of these, think I sold it for about £25-30.
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Wanted a KWA/Umarex Mk23 SOCOM GBB. *NOT A NBB VERSION* Not too fused if it’s boneyard or working, as long as it’s mostly complete. Let me know what you have!£1,234
-
This advert is COMPLETED!
- For sale
- Used
ASG SVD Dragunov spring rifle for sale. This is essentially a rebranded A&K SVD so will fit all/any upgrades for a the A&K. Very sturdy, fires perfectly, no issues. stripped, cleaned & lubricated last week. Firing at 440fps with .20’s and 290fps with .40’s. Boxed with mid cap magazine. £100 posted or collection from Swindon£100
-
This advert is COMPLETED!
- For sale
- Used
For sale Sniper Mechanic SRS WASP piston and Spring Guide. This has some scratching to the steel weighted cylinder and one of the collars, this is where previous owner locktited the weight on… These have been cleaned up so are now smooth. They have no affect on function, still has perfect seal! Comes with the steel, aluminium and plastic weights. £40 posted£40
- GB
-
This advert is COMPLETED!
- For sale
- Used
For sale I have a very large ESSLNB 6-24x50 Illuminated Mil-Dot scope. It came on my SRS, however I needed something with a bit less base magnification. Everything works as it should, I dialled it in perfectly for the SRS with the windage/elevation towers. Has a few minor marks, but nothing significant. £50 posted£50
- GB
-
This advert is COMPLETED!
- For sale
- Used
Up for sale I have my custom VSR10. Only selling due to now moving to the SRS platform for sniping. This has been built as a labour of love over a couple of years. Started as a basic VSR10 G-Spec, now is a fully upgraded beast. Not alot remains of the original TM parts, only the stock and receiver still left on the rifle I think. All the original parts will be included in the sale if you want it. Spec and parts as follows: TM VSR 10 G-Spec Outer barrel - bull barrel, internally suppressed with foam. Bolt Handle - Laylax Inner Barrel - ML Crazy Jet 300mm Hop Chamber - Action Army Hop Rubber - ML Autobot 2021 70degree Hop Nub - Stalker Panthera Cylinder - Action Army Teflon Twisted Piston - Springer Custom Works with airbrake Spring Guide - Springer Custom 9mm stainless (also heat-shrinked for extra quietness!) Spring - Rapax 2j Laylax Sorbo Pads (with spares) Trigger - Springer Customs S-Trigger v9.2 Pro Orange Cylinder Sleeve/guide ring TDC - Tridos Pro Version Enlarged mag release - Maple Leaf Scope - 3-9x40 Illuminated Mil-Dot, with sun shade Harris style Bipod Custom Cheek Riser 3x mags, 2 with “Magpuls” fitted Currently firing at 312fps on .48’s, just below the limit to allow for chrono variations. Outer barrel has 5/6 inches of internal foam rings starting at the end of the inner barrel, so is dead quiet. Stock is also filled with foam in any hollow spaces to deaden sound. This has £600 in parts alone, without the base rifle. Fires spot on. Has been skirmished 4 or 5 times (last time being yesterday!) and I have never had an issue with it on the field. £450 collection from Swindon SN2, or can be delivered locally. £465 posted£465
-
This advert is COMPLETED!
- For sale
- Used
For sale I have an original Toyko Marui XM177a2 spring rifle. Brought maybe 1999ish from Stringtown Supplies (bonus points if you remember them!) Full working condition with original box. Stock slides nicely, and has a secret fold down grip that you can use to cock it like a shotgun! Comes with 2 mags, one working, and one not (missing internals). £70 posted Payment via PayPal, can also be collected from Swindon SN2£70
-
This advert is COMPLETED!
- For sale
- Used
Brought as boneyard, it was having nozzle issues, since fixed with new nozzle return springs, fires perfectly now. I did plan on giving this full Wii Tech internals, but other projects are now taking up my time(& money!). Fitted with a Lees Precision Engineering 14mm muzzle adapter, so it can take normal 14mm suppressors. I have removed the front rail, but will be included, I can put it back on if buyer requests, I prefer the look with it off. The top cover was once red, then painted black, but I have removed all the paint back the original tan finish. Comes with 1 gas tight mag. £160 posted Can be collected from Swindon SN2£160
-
This advert is COMPLETED!
- For sale
- Used
For sale I have what’s left of my spring pistol collection. These are 15-20 years old, but all are working with magazines. Starting top left: KWC Beretta M92FS boxed - £17.50 posted KWC Colt 1991A1 boxed - £17.50 posted Tokyo Marui Ruger P85 (original version with correct Ruger trades) - £25 posted Tokyo Marui Ruger P85 (later version with TM trades) - £25 posted HFC Beretta Super Elite - £20 posted Happy to do discount on multiple items. Will do both Rugers for £40 posted, let’s call it the “Desperado” deal 😉 Payment via PayPal, can also be collected from Swindon SN2NO VALUE SPECIFIED
-
This advert is COMPLETED!
- For sale or swap
- Used
E&L AKs74u, complete with custom fore grip and original railed fore grip. Absolute beast, I love this thing but I’ve done all I can to it, and not it’s not getting the use it deserves. Turns heads whenever I did take it out! Real wood fore grip, edges taken off grip to make it much more comfortable when holding. Also comes with original full railed foregrip. Perun Optical V3 Mosfet fitted, currently set to semi and 5 round burst, but can be reprogrammed on the fly. ZCI 6.02 barrel that was R-Hopped by previous owner, loves .28’s. Also 5x E&L mid caps, and 1 LCT mid cap. 3 of the mid caps have been dyed Plum, very nice in the light! All mags have been fitted with “Stopa” genuine Russian Magpuls, again perfect bits of kit. Wired to deans, and in original box. Not in a particular rush to part with this, would be up for a swap/PX for an SRS…. £340 posted Or collected from Swindon SN2£340
-
This advert is COMPLETED!
- For sale
- Used
PBS-1 style silencer. Solid metal, can be disassembled. Has a direct fit for 24mm AK barrels, or a 14mm- thread. £18 posted. Can be collected from Swindon SN2.£18
-
This advert is COMPLETED!
- For sale
- As new
Hephaestus AK silencer adapter. Fit a 14mmCCW silencer to your AK’s 24mm barrel thread. Advertised as fitting GHK and LCT, but also fit my E&L. I had to import this from HK as nobody has them in stock in UK. It has been test fitted to my AK but never skirmished. £12.50 posted. Can be collected from Swindon SN2.£12.50
-
This advert is COMPLETED!
- For sale
- As new
ASG Mk23 with “power up” suppressor and magazine. Mag is upgraded with Hadron “hop lips” and a project airsoft mag follower. Pistol has had the nozzle slightly sanded down to prevent sticky trigger, standard on any Mk23! £50 posted. Can be collected from Swindon SN2.£50
-
This advert is COMPLETED!
- For sale
- Used
*PLEASE NOTE - THIS IS NOT COMPATIBLE WITH THE NEWER KSC/ASG/KWA MP9 SYSTEMS* KSC TP9 with magazine. Currently boneyard, it will cycle for a few shots then stop. Gun is complete, but magazine is missing fill valve and mag spring/follower. Great for a parts gun if you already have one, or a very nice wall hanger! £45 posted. Can be collected from Swindon SN2.£45
-
This advert is COMPLETED!
- For sale
- Used
Originally brought boneyard, now upgraded to better than new spec. Has the very desirable TNT Barrel set up, which can quite easily hop .40’s and is the best barrel set up available for MP9’s (with the price to match!). Has been upgraded with the WII TECH steel disconnector, 130% recoil spring, LPE Piston Head, and a BRAND NEW CQB bolt (fitted and fired 5 rounds to test). The only issue is previous owner has somehow mangled the grub screw that holds the barrel set together. Has no affect on operation, but currently stops you taking the TNT assembly apart. So package is: KWA MP9 with x1 48rnd mag TNT MP9 Barrel Set WII Tech Steel Disconnector WII Tech 130% Recoil Spring Lees Precision Engineering Piston Head New CQB Bolt Set £230 posted, or collection from Swindon I can also include a second long magazine for an extra £30£230
- GB
-
This advert is COMPLETED!
- For sale
- Used
EdGi 430mm 6.01 brass barrel, unbridged. Some very light marks on the outer, but inner is still perfect and looks like a mirror. Hop window has been professionally widened for a larger hop contact area. £50 posted Action Army VSR hop chambers x2. Both complete, one is slightly more worn than the other but doesn’t affect function. £30 each posted. I can also do a complete ready to go VSR set up (EdGi barrel, AA chamber, ML Autobot silicone 70degree and Panthera concave nub) for £85. Payment via PayPal. Can be collected from Swindon.£50
- GB
-
This advert is COMPLETED!
- For sale
- Used
Brought around 15 years ago, Western Arms Defender that has been converted to V10 spec with a metal slide & barrel. Also included is the original Defender slide with barrel/chamber if you wanted to return it to stock. I have recently brought the correct V10 Hybrid spec steel chamber, which has not yet been fitted. Fires perfectly, skirmished once. It does have a few minor scratches, the plastic V10 chamber the fake chrome is peeling at the back, but that’s what the steel one will replace. Total package is: WA Colt Defender with x2 mags (Boxed with instructions) Boom Arms V10 Metal Slide & outer barrel Creation V10 Steel Chamber Original WA Defender slide, outer barrel & chamber Genuine Pachmayer grips Metal wood effect solid grips Original rubber grips Obviously incredibly rare now, especially with the metal slide etc. £180 posted Or collection from Swindon£180
- GB
-
This advert is COMPLETED!
- For sale
- Used
Brought as boneyard, it has now been completely refurbished to better than new spec. Came to me with a broken disconnector, and mangled nozzle/nozzle return springs. Also the barrel was fitted at an angle. Now all rectified (see list below for parts used), all cleaned/lubed up and firing superbly. The externals have seen use, there are a few little scratches, but no major damage at all. Also included is an ASG QD Suppressor, this has been filled with Silverback silencer foam from the .50cal silencer, which fits this one like a glove! I also have an Airsoft Engenuity 3D printed barrel, fitted with a Maple Leaf 138mm 6.02 barrel, and a Maple Leaf Decepticon 60 rubber, I can include this at extra cost. So the package is: ASG/KWA MP9 (no box) 1x 50 round mag ASG QD Suppressor with foam WiiTech Enhanced Steel Disconnector WiiTech Enhanced nozzle & hammer springs WiiTech Enhanced 130% recoil spring Lees Precision Engineering Piston Head Extra, if wanted: Airsoft Engenuity 3D Printed Barrel Maple Leaf 138mm 6.02 barrel Maple Leaf Autobot 60degree hop rubber This is now a nicely reinforced MP9, with all the weak points sorted, so it’s ready to go! £200 posted with standard barrel group £230 posted with Maple Leaf barrel group£200
- GB
-
This advert is COMPLETED!
- For sale
- Used
ASG Scorpion EVO 3A1 Boxed with Hi Cap mag and manual. I brought it as a CQB smg but prefer my MP9. Has a few marks and light scratches, bolt is a little worn, but no major damage. Only issue is the the bolt return spring is missing, doesn’t affect function. Fires perfect on all fire modes. £230 posted, O.N.O Also collection available from Swindon. Only swaps I’m interested in are MP9 mags, or maybe a TM Breacher.£230
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Genuine Blackhawk holster for Sig 220/226/228/229 in tan. Catalog number C1378. Used, but in very good condition. Will attach to any 3 point mount. £15posted or collected from Swindon£15
